PANASONIC ECWU1682JX5

Plastic Film Capacitors
Stacked Metallized PEN Film Chip Capacitor
Type:
ECWU(X)
Stacked metallized PEN film as dielectric with simple
mold-less construction
■Features
• Small in size (minimum size 3.2 mm ✕ 1.6 mm)
• 85 ˚C, 85 %RH, W.V. ✕ 1.0 for 500 hours
• For reflow soldering
• RoHS directive compliant
■Recommended Applications
• General purpose (Coupling, By-pass)
■Explanation of Part Numbers
1
2
3
4
5
E
C
W
U
1
Product code
6
Dielectric & Rated voltage
construction
1
7
Capacitance
100 VDC
8
9
10
11
J
X
5
Cap. Tol. Suffix
J
Suffix
±5 %
5
Tape width
8 mm
■Specifications
Category temp. range
(Including temperature-rise on unit surface)
–55 ˚C to +105 ˚C
Rated voltage
100 VDC
Capacitance range
Capacitance tolerance
0.0010 µF to 0.010 µF (E12)
±5 % (J)
Withstand voltage
Between terminals : Rated volt. (VDC)✕150 % 60 s
Dissipation factor (tan )
tan <
=1.0 % (20 ˚C, 1 kHz)
Insulation resistance (IR)
>3000 MΩ (20 ˚C, 100 VDC, 60 s)
IR=
Soldering conditions
Reflow soldering : 240 ˚C max. and 60 s max. at more than 220 ˚C
(Temp. at cap. surface)
(Please consult us for Reflow 250 ˚C max product.)
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
■Construction
■Dimensions in mm (not to scale)
size
code
H2
L
W
H
e
g
3.2
1.6
1.1
0.65
H3
G2
3.2
3.2
1.6
2.5
1.5
1.5
0.65
0.65
G3
3.2
2.5
2.1
0.65
>1.0
=
>
=1.0
>1.0
=
>1.0
=
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Plastic Film Capacitors
■Taping Specification for Automatic Mounting
Refer to the page of taping specifications.
■ Rating, Dimensions & Quantity/Reel
●Capacitance tolerance : ±5 % (J)
Rated volt. 100 VDC
Cap. (µF)
Part No.
Dimensions (mm)
Code
L
W
H
0.0010
ECWU1102JX5
3.2 1.6
1.1 H2
0.0012
ECWU1122JX5
3.2 1.6
1.1 H2
0.0015
ECWU1152JX5
3.2 1.6
1.1 H2
0.0018
ECWU1182JX5
3.2 1.6
1.1 H2
0.0022
ECWU1222JX5
3.2 1.6
1.1 H2
0.0027
ECWU1272JX5
3.2 1.6
1.1 H2
0.0033
ECWU1332JX5
3.2 1.6
1.5 H3
0.0039
ECWU1392JX5
3.2 1.6
1.5 H3
0.0047
ECWU1472JX5
3.2 1.6
1.5 H3
0.0056
ECWU1562JX5
3.2 2.5
1.5 G2
0.0068
ECWU1682JX5
3.2 2.5
1.5 G2
0.0082
ECWU1822JX5
3.2 2.5
2.1 G3
0.010
ECWU1103JX5
3.2 2.5
2.1 G3
>0.012 µF : Please use 100 VDC rating of ECWU(C)
cap.=
Q'ty
3000
2000
■Recommened for Land Dimensions (mm)
Size
code
H2,H3
G2,G3
Land dimensions
for reflow soldering
A
B
C
1.8
1.8
3.6
3.6
1.4
2.3
❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when
“Recommender for Land dimensions” is adopted.
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.