K...H Series www.vishay.com Vishay BCcomponents High Operating Temperature Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications, 50 VDC, 100 VDC, 200 VDC FEATURES • AEC-Q200 qualified with PPAP available • High reliability MLCC insert with wet build process • High operating temperature up to 175 °C • High capacitance with small size • Radial mounting style • Crimp and straight leadstyles • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Automotive applications up to 175 °C QUICK REFERENCE DATA DESCRIPTION Ceramic Class Ceramic Dielectric Voltage (VDC) Min. Capacitance (pF) Max. Capacitance (pF) Mounting VALUE 50 100 12 000 1 C0G 100 100 12 000 200 100 8200 50 47 000 1 000 000 2 X0U 100 47 000 470 000 200 82 000 180 000 Radial MARKING CAPACITANCE RANGE Marking indicates capacitance value and tolerance in accordance with “EIA 198”. 100 pF to 1 μF TOLERANCE ON CAPACITANCE OPERATING TEMPERATURE RANGE ± 5 %, ± 10 %, ± 20 % -55 °C to +175 °C (voltage derating above 150 °C) RATED VOLTAGE TEMPERATURE CHARACTERISTICS 50 VDC, 100 VDC, 200 VDC Class 1: C0G (± 30 ppm/K within -55 °C to +175 °C) Class 2: X0U (+22 % / -56 % within -55 °C to +175 °C) TEST VOLTAGE SECTIONAL SPECIFICATIONS Climatic category (acc. to EN 60058-1) 55/125/21 • 50 VDC and 100 VDC: 250 % of rated voltage • 200 VDC: 200 % of rated voltage INSULATION RESISTANCE EIA 198 IEC 60384-9 AEC-Q200 • 50 VDC, 100 VDC: 100 G or 1000 F whichever is less at rated voltage within 2 min of charging • 200 VDC: 10 G or 100 F whichever is less at rated voltage within 2 min of charging DESIGN DISSIPATION FACTOR • The capacitors consist of a high reliability MLCC • Leads wires are 0.5 mm or 0.6 mm and are made of 100 % tinned copper clad steel wire • The capacitors may be supplied with straight or kinked leads having a lead spacing of 2.5 mm and 5.0 mm • Coating is made of flame retardant epoxy resin in accordance with UL 94 V-0 Class 1: 0.1 % max. (C 1000 pF, at 1 MHz, 1 V; C > 1000 pF, at 1 kHz, 1 V) Class 2: 2.5 % max. (at 1 kHz, 1 V) APPROVALS Revision: 15-Mar-16 Document Number: 45211 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K...H Series www.vishay.com Vishay BCcomponents LEAD CONFIGURATION AND DIMENSIONS in millimeters Wb Wb H H SH SH L L 5.0 ± 0.8 2.5 ± 0.8 H5 Component outline for lead spacing 5.0 mm ± 0.5 mm (flat bent leads) L2 Component outline for lead spacing 2.5 mm ± 0.5 mm (straight leads) MAXIMUM SEATING HEIGHT (SH) SIZE CODE WbMAX. HMAX. TMAX. LEAD DIAMETER L2 H5 15 3.0 - 3.8 2.0 - 3.8 1.6 - 2.6 0.50 ± 0.05 1.6 2.6 20 4.3 - 5.1 2.5 - 5.1 1.9 - 3.2 0.50 ± 0.05 1.6 2.6 Notes • Bulk packed types have a standard lead length L = 30 mm ± 5 mm. • L2 and H5 are preferred styles. MARKING (two sides) SIZE 15 CAPACITANCE VALUE ≥ 100 pF SIZE 20 Side One Side One Side Two DDDD Vishay logo or BC logo X X X Side Two DDDD Vishay logo or BC logo DDDH X X X XXX: Capacitance code t DDDH t: Tolerance code XXX: Capacitance code Last 7 digits of lot number Last 7 digits of lot number Notes • Two significant digits followed by one digit for the multiplier: 1 = * 10, 2 = * 100, 3 = * 1000, 4 = * 10 000, 5 = * 100 000. • The tolerance codes are J = ± 5 %, K = ± 10 %, M = ± 20 % ORDERING CODE INFORMATION K 104 K 15 X0U F 1 234 5 67 8 9 10 11 Product Type Capacitance (pF) Capacitance Tolerance Size Code T.C. Code Rated Voltage 5 3 12 13 Lead Packaging/ Diameter Lead Length H 5 H 14 15 16 Lead Style Lead Spacing AEC-Q200 qualified K = Radial The first two J=±5% Please Please F = 50 VDC 5 = 0.50 mm 3 = Bulk H = Flat 2 = 2.5 mm H = High leaded digits are the K = ± 10 % refer to refer to H = 100 VDC ± 0.05 mm T = Tape crimp 5 = 5.0 mm operating MLCC significant figures M = ± 20 % relevant relevant K = 200 VDC 6 = 0.60 mm and reel L = Straight temperature of capacitance datasheet datasheet ± 0.05 mm U = Ammo K = Outside and the last digit crimp is a multiplier as follows: 1 = * 10 2 = * 100 3 = * 1000 4 = * 10 000 5 = * 100 000 Revision: 15-Mar-16 Document Number: 45211 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K...H Series www.vishay.com Vishay BCcomponents ORDERING CODES DIELECTRIC C0G CAP. (pF) 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10 000 12 000 50 VDC 100 VDC 200 VDC K101#15C0GF5###H K121#15C0GF5###H K151#15C0GF5###H K181#15C0GF5###H K221#15C0GF5###H K271#15C0GF5###H K331#15C0GF5###H K391#15C0GF5###H K471#15C0GF5###H K561#15C0GF5###H K681#15C0GF5###H K821#15C0GF5###H K102#15C0GF5###H K122#15C0GF5###H K152#15C0GF5###H K182#15C0GF5###H K222#15C0GF5###H K272#15C0GF5###H K332#15C0GF5###H K392#15C0GF5###H K472#20C0GF6###H K562#20C0GF6###H K682#20C0GF6###H K822#20C0GF6###H K103#20C0GF6###H K123#20C0GF6###H K101#15C0GH5###H K121#15C0GH5###H K151#15C0GH5###H K181#15C0GH5###H K221#15C0GH5###H K271#15C0GH5###H K331#15C0GH5###H K391#15C0GH5###H K471#15C0GH5###H K561#15C0GH5###H K681#15C0GH5###H K821#15C0GH5###H K102#15C0GH5###H K122#15C0GH5###H K152#15C0GH5###H K182#15C0GH5###H K222#20C0GH6###H K272#20C0GH6###H K332#20C0GH6###H K392#20C0GH6###H K472#20C0GH6###H K562#20C0GH6###H K682#20C0GH6###H K822#20C0GH6###H K103#20C0GH6###H K123#20C0GH6###H K101#15C0GK5###H K121#15C0GK5###H K151#15C0GK5###H K181#15C0GK5###H K221#15C0GK5###H K271#15C0GK5###H K331#15C0GK5###H K391#15C0GK5###H K471#15C0GK5###H K561#15C0GK5###H K681#15C0GK5###H K821#15C0GK5###H K102#15C0GK5###H K122#20C0GK6###H K152#20C0GK6###H K182#20C0GK6###H K222#20C0GK6###H K272#20C0GK6###H K332#20C0GK6###H K392#20C0GK6###H K472#20C0GK6###H K562#20C0GK6###H K682#20C0GK6###H K822#20C0GK6###H / / 50 VDC 100 VDC 200 VDC K473#15X0UF5###H K563#15X0UF5###H K683#15X0UF5###H K823#15X0UF5###H K104#15X0UF5###H K124#15X0UF5###H K154#15X0UF5###H K184#20X0UF6###H K224#20X0UF6###H K274#20X0UF6###H K334#20X0UF6###H K394#20X0UF6###H K474#20X0UF6###H K564#20X0UF6###H K684#20X0UF6###H K824#20X0UF6###H K105#20X0UF6###H K473#15X0UH5###H K563#15X0UH5###H K683#15X0UH5###H K823#15X0UH5###H K104#15X0UH5###H K124#20X0UH6###H K154#20X0UH6###H K184#20X0UH6###H K224#20X0UH6###H K274#20X0UH6###H K334#20X0UH6###H K394#20X0UH6###H K474#20X0UH6###H / / / / / / / K823#20X0UK6###H K104#20X0UK6###H K124#20X0UK6###H K154#20X0UK6###H K184#20X0UK6###H / / / / / / / / / DIELECTRIC X0U CAP. (pF) 47 000 56 000 68 000 82 000 100 000 120 000 150 000 180 000 220 000 270 000 330 000 390 000 470 000 560 000 680 000 820 000 1 000 000 Notes • Lead diameter is 0.5 mm or 0.6 mm • # 5th digit is capacitance tolerance code: ± 5 % = J; ± 10 % = K; ± 20 % = M • # 13th digit is packaging code: Bulk = 3; Reel = T; Ammo = U • # 14th digit is lead style code: L; H; K (L and H are preferred lead configuration) • # 15th digit is lead spacing code: 2.5 mm = 2; 5.0 mm = 5 Revision: 15-Mar-16 Document Number: 45211 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K...H Series www.vishay.com Vishay BCcomponents URated (%) RATED VOLTAGE VS. TEMPERATURE (Typical) 125 100 75 50 25 0 -75 -50 -25 0 25 50 75 100 125 150 175 200 225 ϑA (°C) ᐃC/C (%) CAPACITANCE CHANGE VS. TEMPERATURE (Typical) 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 C0G (NP0) X7R limit X7R, X0U X0U limit -75 -50 -25 0 25 50 75 100 125 150 175 200 225 ϑA (°C) DF (%) DISSIPATION FACTOR VS. TEMPERATURE (Typical) 6 5 4 3 X7R, X0U 2 1 0 -75 -50 -25 0 25 50 75 100 125 150 175 200 225 ϑA (°C) INSULATION RESISTANCE VS. TEMPERATURE (Typical) IR (ΩF) 10 000 C0G (NP0) 1000 X7R, X0U 100 10 10 100 ϑA (°C) Revision: 15-Mar-16 Document Number: 45211 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K...H Series www.vishay.com Vishay BCcomponents TAPING AND PACKAGING LABELLING For example: Each reel is provided with a label showing the following details: Manufacturer, K style, capacitance, tolerance, batch number, quantity of components, rated voltage, dielectric. On special request other designations can be shown. PACKAGING QUANTITIES AND BOX DIMENSIONS PACKAGING SMALLEST PACKAGING QUANTITY (SPQ) 4000 3000 2500 5000 SIZE CODE 15 20 15, 20 15, 20 Tape on reel Ammopack Bulk (1) BOX DIMENSIONS L x W x H (mm) 370 x 370 x 60 335 x 290 x 50 245 x 120 x 65 Note (1) SPQ contains one or a multiple of poly-bags, 1000 units per bag. CAPACITORS ON TAPE Δh P Seating plane F P1 H1 H0 H L W1 W A W0 L1 P0 d D0 PARAMETER Cut-off length Lead end protrusion Height to seating plane (straight leads) Height to seating plane (crimp leads) Top of component height Body inclination Carrier tape width Hold down tape width Sprocket hole position SYMBOL L L1 H H0 H1 h W W0 W1 Lead space F Sprocket hole pitch Sprocket hole center to lead center at F = 2.5 mm Sprocket hole center to lead center at F = 5 mm Sprocket hole diameter Overall tape thickness Wire lead diameter Taping pitch P0 Revision: 15-Mar-16 P1 D0 t d P t DIMENSIONS mm INCH 11 0.443 1 0.039 18 0.709 16.0 ± 0.5 0.630 ± 0.020 32 1.26 0 ± 1.0 0 ± 0.039 18.0 +1.0/-0.5 0.709 +0.039/-0.020 15.0 REF. 0.591 REF. 9.00 +0.075/-0.50 0.354 +0.030/-0.020 2.50 +0.60/-0.40 0.100 +0.024/-0.016 5.00 +0.60/-0.40 0.200 +0.024/-0.016 12.70 ± 0.30 0.500 ± 0.012 5.08 ± 0.70 0.200 ± 0.028 3.85 ± 0.70 0.150 ± 0.028 4.0 ± 0.30 0.157 ± 0.012 0.90 0.035 0.50 ± 0.05 0.020 ± 0.002 12.7 REF. 0.50 REF. Document Number: 45211 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K...H Series www.vishay.com Vishay BCcomponents REEL DATA REEL A maximum of 0.5 % of the total number of capacitors per reel may be missing. 55.1 Max. +0 48 - 2.0 A maximum of 1 consecutive vacant positions is followed by 6 consecutive components. 355.6 max. Tape begins and ends with a minimum of 4 empty positions (50 mm tape). Maximum of 5 splicers per reel. Direction of unreeling Arbor hole Ø 28 ± 1 REEL DIMENSIONS A K H1 H2 L REEL SIZE A (mm) Outer diameter 355.6 max. 28 ± 1 L Hole diameter K Core diameter 90 H1 Internal width 48 +0/-2 H2 External width 55 max. AMMOPACK DATA AMMOPACK A maximum of 0.5 % of the total number of capacitors per pack may be missing. A maximum of 1 consecutive vacant positions is followed by 6 consecutive components. Tape begins and ends with a minimum of 4 empty positions (50 mm tape). 290 Maximum of 5 splicers per pack. The cumulative pitch tolerance over 20 consecutive units is not to exceed ± 1.0 mm. 335 50 Lead space (F) shall be measured at 3.6 mm ± 0.5 mm from the capacitor seating plane. RELATED DOCUMENTS General Information www.vishay.com/doc?45214 SAMPLE KIT Part Number Link Revision: 15-Mar-16 HOTC-KIT-KH www.vishay.com/doc?45234 Document Number: 45211 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000