TLS CTR RGB A

RGB LED strip control unit
TLS-CTR-RGB-A
■ Features:
Ø 105*65*25mm dimension
Ø 12VDC input
Ø output with 4 connect, +12V/R/G/B, Power: 180W
Ø With remote control
Ø 11 kinds color variation. R/G/B/V/GB/Y/W/RGB blinking/ 7 color blinking/ RGB slow blinking/ 7 color
slow blinking
Ø Light, small dimension, easy to use.
Ø With remote control
Ø Application for: LED module, LED flexible strip
n
Full set of LED strip picture
n Adjustable Light Controller Manual
I、main technical indicators
Operating temperature:-20-60℃
Supply voltage: DC12V
Output: tri CMOS open-drain output
Connection: Anode sharing
Rated load current: 4A every way
Maximum load current: 6A every way
II、operation
Use control buttons, key features are as follows (the same remote control):
On / off: can be turned on or off output controller from any state;
Mode: function keys for the light color; choose a different kind of color changes,
a total of 11 changes
Brightness +: output brightness control, every time the brightness level up 1, a total of 256;
Brightness -: every time the brightness changes by 1 level;
Speed +: speed control, every time the speed up 1 grade, a total of 100;
Speed -: every time the speed of changes by 1 level.
APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS
REV NO: V.2
Page 1 of 2
WWW.BETLUX.COM
EMAIL: [email protected] , [email protected]
RGB LED strip control unit
TLS-CTR-RGB-A
Color changes as follows:
No.
Color
Remarks
1
Red(static)
2
Blue (static)
3
Purple(static)
4
Green(static)
10
5
Yellow(static)
11
6
Cyan(static)
Adjustable
brightness,
the speed is
not
adjustable
No.
Color
7
White(static)
8
Tricolor hopping
Seven-color
hopping
9
Tricolor
gradient
Seven-color
gradient
Remarks
Adjustable
brightness,
the speed is
not
adjustable
Adjustable
brightness
and speed
Adjustable speed
III、Control Panel and connection as follows:
IV、Attention:
1、 The supply voltage for the product is DC12V, DC24V or AC220V is not available.
2、 Never connect the cathode and the anode together, otherwise it may lead to short circuit.
3、 Output line should be connected under the wiring diagram provided by the color
APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS
REV NO: V.2
Page 2 of 2
WWW.BETLUX.COM
EMAIL: [email protected] , [email protected]