NGB8206N D

NGB8206N, NGB8206AN
Ignition IGBT
20 A, 350 V, N−Channel D2PAK
This Logic Level Insulated Gate Bipolar Transistor (IGBT) features
monolithic circuitry integrating ESD and Overvoltage clamped
protection for use in inductive coil drivers applications. Primary uses
include Ignition, Direct Fuel Injection, or wherever high voltage and
high current switching is required.
http://onsemi.com
20 AMPS, 350 VOLTS
VCE(on) = 1.3 V @
IC = 10 A, VGE . 4.5 V
Features
• Ideal for Coil−on−Plug and Driver−on−Coil Applications
• Gate−Emitter ESD Protection
• Temperature Compensated Gate−Collector Voltage Clamp Limits
•
•
•
•
•
C
Stress Applied to Load
Integrated ESD Diode Protection
Low Threshold Voltage for Interfacing Power Loads to Logic or
Microprocessor Devices
Low Saturation Voltage
High Pulsed Current Capability
These are Pb−Free Devices
RG
G
RGE
E
Applications
• Ignition Systems
MARKING DIAGRAM
4 Collector
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Collector−Emitter Voltage
VCES
390
V
Collector−Gate Voltage
VCER
390
V
Gate−Emitter Voltage
VGE
$15
V
Collector Current−Continuous
@ TC = 25°C − Pulsed
IC
20
50
ADC
AAC
Continuous Gate Current
IG
1.0
mA
Transient Gate Current (t ≤ 2 ms, f ≤ 100 Hz)
IG
20
mA
ESD (Charged−Device Model)
ESD
2.0
kV
ESD (Human Body Model)
R = 1500 W, C = 100 pF
ESD
ESD (Machine Model) R = 0 W, C = 200 pF
ESD
500
V
PD
150
1.0
W
W/°C
TJ, Tstg
−55 to
+175
°C
Total Power Dissipation @ TC = 25°C
Derate above 25°C
Operating & Storage Temperature Range
kV
8.0
GB
8206xxG
AYWW
1
D2PAK
CASE 418B
STYLE 4
1
Gate
3
Emitter
2
Collector
GB8206xx = Device Code
xx = N or AN
A
= Assembly Location
Y
= Year
WW
= Work Week
G
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
© Semiconductor Components Industries, LLC, 2012
February, 2012 − Rev. 9
1
Publication Order Number:
NGB8206N/D
NGB8206N, NGB8206AN
UNCLAMPED COLLECTOR−TO−EMITTER AVALANCHE CHARACTERISTICS (−55° ≤ TJ ≤ 175°C)
Characteristic
Symbol
Single Pulse Collector−to−Emitter Avalanche Energy
VCC = 50 V, VGE = 5.0 V, Pk IL = 16.7 A, L = 1.8 mH, Rg = 1 kW Starting TJ = 25°C
VCC = 50 V, VGE = 5.0 V, Pk IL = 14.9 A, L = 1.8 mH, Rg = 1 kW Starting TJ = 150°C
VCC = 50 V, VGE = 5.0 V, Pk IL = 14.1 A, L = 1.8 mH, Rg = 1 kW Starting TJ = 175°C
Value
EAS
Reverse Avalanche Energy
VCC = 100 V, VGE = 20 V, Pk IL = 25.8 A, L = 6.0 mH, Starting TJ = 25°C
Unit
mJ
250
200
180
EAS(R)
mJ
2000
THERMAL CHARACTERISTICS
Thermal Resistance, Junction−to−Case
RqJC
1.0
°C/W
Thermal Resistance, Junction−to−Ambient (Note 1)
RqJA
62.5
°C/W
TL
275
°C
Maximum Temperature for Soldering Purposes, 0.125 in from case for 5 seconds (Note 2)
1. When surface mounted to an FR4 board using the minimum recommended pad size.
2. For further details, see Soldering and Mounting Techniques Reference Manual: SOLDERRM/D.
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Test Conditions
Temperature
Min
Typ
Max
Unit
BVCES
IC = 2.0 mA
TJ = −40°C to 175°C
325
350
375
V
IC = 10 mA
TJ = −40°C to 175°C
340
365
390
VCE = 15 V,
VGE = 0 V
TJ = 25°C
0.1
1.0
OFF CHARACTERISTICS
Collector−Emitter Clamp Voltage
Zero Gate Voltage Collector Current
ICES
VCE = 175 V,
VGE = 0 V
Reverse Collector−Emitter Clamp
Voltage
BVCES(R)
IC = −75 mA −
NGB8206
IC = −75 mA −
NGB8206A
Reverse Collector−Emitter Leakage Current
Gate−Emitter Clamp Voltage
Gate−Emitter Leakage Current
ICES(R)
TJ = 25°C
0.5
1.5
10
TJ = 175°C
1.0
25
100*
TJ = −40°C
0.4
0.8
5.0
TJ = 25°C
30
35
39
TJ = 175°C
35
39
45*
TJ = −40°C
30
33
37
TJ = 25°C
30
35
39
TJ = 175°C
32
37
42
TJ = −40°C
29
32
37
TJ = 25°C
0.05
0.25
0.5
VCE = −24 V −
NGB8206
TJ = 175°C
1.0
12.5
25
TJ = −40°C
0.005
0.03
0.25
TJ = 25°C
0.05
0.25
1.0
VCE = −24 V −
NGB8206A
TJ = 175°C
1.0
12.5
25
TJ = −40°C
0.005
0.03
0.25
mA
V
mA
BVGES
IG = $5.0 mA
TJ = −40°C to 175°C
12
12.5
14
V
IGES
VGE = $5.0 V
TJ = −40°C to 175°C
200
300
350*
mA
Gate Resistor
RG
TJ = −40°C to 175°C
70
Gate−Emitter Resistor
RGE
TJ = −40°C to 175°C
14.25
16
25
kW
TJ = 25°C
1.5
1.8
2.1
V
TJ = 175°C
0.7
1.0
1.3
TJ = −40°C
1.7
2.0
2.3*
W
ON CHARACTERISTICS (Note 3)
Gate Threshold Voltage
VGE(th)
IC = 1.0 mA,
VGE = VCE
*Maximum Value of Characteristic across Temperature Range.
3. Pulse Test: Pulse Width v 300 mS, Duty Cycle v 2%.
http://onsemi.com
2
NGB8206N, NGB8206AN
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Test Conditions
Temperature
Min
Typ
Max
Unit
3.8
4.6
6.0
mV/°C
TJ = 25°C
0.95
1.15
1.35
V
TJ = 175°C
0.70
0.95
1.15
TJ = −40°C
1.0
1.30
1.40
ON CHARACTERISTICS (Note 3)
Threshold Temperature Coefficient (Negative)
Collector−to−Emitter On−Voltage
VCE(on)
IC = 6.5 A,
VGE = 3.7 V
Forward Transconductance
gfs
TJ = 25°C
0.95
1.25
1.45
IC = 9.0 A,
VGE = 3.9 V
TJ = 175°C
0.8
1.05
1.25
TJ = −40°C
1.1
1.4
1.50
TJ = 25°C
0.85
1.15
1.4
IC = 7.5 A,
VGE = 4.5 V
TJ = 175°C
0.7
0.95
1.2
TJ = −40°C
1.0
1.3
1.6*
IC = 10 A,
VGE = 4.5 V
NGB8206
TJ = 25°C
1.0
1.3
1.6
TJ = 175°C
0.8
1.05
1.4
TJ = −40°C
1.1
1.4
1.7*
IC = 10 A,
VGE = 4.5 V
NGB8206A
TJ = 25°C
0.9
1.2
1.6
TJ = 175°C
0.8
1.05
1.4
TJ = −40°C
1.0
1.2
1.7*
IC = 15 A,
VGE = 4.5 V
NGB8206
TJ = 25°C
1.15
1.45
1.7
TJ = 175°C
1.0
1.3
1.55
TJ = −40°C
1.25
1.55
1.8*
IC = 15 A,
VGE = 4.5 V
NGB8206A
TJ = 25°C
1.0
1.3
1.7
TJ = 175°C
1.0
1.3
1.55
TJ = −40°C
1.1
1.35
1.8*
TJ = 25°C
1.3
1.6
1.9
IC = 20 A,
VGE = 4.5 V
TJ = 175°C
1.2
1.5
1.8
TJ = −40°C
1.4
1.75
2.0*
IC = 6.0 A,
VCE = 5.0 V
TJ = 25°C
10
18
25
Mhos
1100
1300
1500
pF
70
80
90
18
20
22
DYNAMIC CHARACTERISTICS
Input Capacitance
CISS
Output Capacitance
COSS
Transfer Capacitance
CRSS
f = 10 kHz, VCE = 25 V
*Maximum Value of Characteristic across Temperature Range.
3. Pulse Test: Pulse Width v 300 mS, Duty Cycle v 2%.
http://onsemi.com
3
TJ = 25°C
NGB8206N, NGB8206AN
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Test Conditions
Temperature
Min
Typ
Max
Unit
TJ = 25°C
6.0
8.0
10
mSec
TJ = 175°C
6.0
8.0
10
TJ = 25°C
4.0
6.0
8.0
TJ = 175°C
8.0
10.5
14
SWITCHING CHARACTERISTICS
Turn−Off Delay Time (Resistive)
Fall Time (Resistive)
Turn−Off Delay Time (Inductive)
Fall Time (Inductive)
Turn−On Delay Time
Rise Time
td(off)
tf
td(off)
tf
td(on)
tr
VCC = 300 V, IC = 9.0
A
RG = 1.0 kW, RL = 33
W
VGE = 5 V
VCC = 300 V, IC = 9.0
A
RG = 1.0 kW, L = 300
mH
VGE = 5 V
VCC = 14 V, IC = 9.0 A
RG = 1.0 kW, RL = 1.5
W
VGE = 5 V
*Maximum Value of Characteristic across Temperature Range.
3. Pulse Test: Pulse Width v 300 mS, Duty Cycle v 2%.
http://onsemi.com
4
TJ = 25°C
3.0
5.0
7.0
TJ = 175°C
5.0
7.0
9.0
TJ = 25°C
1.5
3.0
4.5
TJ = 175°C
5.0
7.0
10
TJ = 25°C
1.0
1.5
2.0
TJ = 175°C
1.0
1.5
2.0
TJ = 25°C
4.0
6.0
8.0
TJ = 175°C
3.0
5.0
7.0
NGB8206N, NGB8206AN
TYPICAL ELECTRICAL CHARACTERISTICS
400
30
TJ = 25°C
IA, AVALANCHE CURRENT (A)
SCIS ENERGY (mJ)
350
300
250
TJ = 175°C
200
150
100
VCC = 14 V
VGE = 5.0 V
RG = 1000 W
50
0
2
0
6
4
L = 1.8 mH
20
L = 3.0 mH
15
10
L = 10 mH
5
0
−50
10
8
VCC = 14 V
VGE = 5.0 V
RG = 1000 W
25
−25
INDUCTOR (mH)
60
2.0
IC = 25 A
IC = 20 A
1.5
IC = 15 A
1.25
IC = 10 A
1.0
IC = 7.5 A
0.75
0.5
0.25
VGE = 4.5 V
0.0
−50
−25
0
25
50
75
100
125
150
50
75
100
125
150 175
4V
TJ = 175°C
40
3.5 V
30
3V
20
2.5 V
10
0
175
4.5 V
5V
0
1
2
3
4
5
6
7
8
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
Figure 3. Collector−to−Emitter Voltage vs.
Junction Temperature
Figure 4. Collector Current vs.
Collector−to−Emitter Voltage
60
60
VGE = 10 V
50
4.5 V
4V
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
50
VGE = 10 V
TJ, JUNCTION TEMPERATURE (°C)
5V
40
TJ = 25°C
3.5 V
30
20
3V
10
0
25
Figure 2. Open Secondary Avalanche Current
vs. Temperature
IC, COLLECTOR CURRENT (A)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
Figure 1. Self Clamped Inductive Switching
1.75
0
TJ, JUNCTION TEMPERATURE (°C)
2.5 V
0
1
2
3
4
5
6
7
VGE = 10 V
4V
5V
40
TJ = −40°C
3.5 V
30
20
3V
10
0
8
4.5 V
50
2.5 V
0
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
1
2
3
4
5
6
7
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
Figure 5. Collector Current vs.
Collector−to−Emitter Voltage
Figure 6. Collector Current vs.
Collector−to−Emitter Voltage
http://onsemi.com
5
8
NGB8206N, NGB8206AN
TYPICAL ELECTRICAL CHARACTERISTICS
100000
VCE = 5 V
40
COLLECTOR TO EMITTER LEAKAGE
CURRENT (mA)
IC, COLLECTOR CURRENT (A)
45
10000
35
30
25
20
TJ = 25°C
15
10
TJ = 175°C
5
0
0
1
0.5
1.5
TJ = −40°C
2
2.5
3
3.5
10
VCE = 175 V
1.0
0.1
−50
−25
0
25
75
50
100
125
150 175
VGE, GATE TO EMITTER VOLTAGE (V)
TJ, JUNCTION TEMPERATURE (°C)
Figure 7. Transfer Characteristics
Figure 8. Collector−to−Emitter Leakage
Current vs. Temperature
10000
2.25
Mean
Mean + 4 s
2.00
1.75
C, CAPACITANCE (pF)
GATE THRESHOLD VOLTAGE (V)
100
4
2.50
Mean − 4 s
1.50
1.25
1.00
0.75
0.50
Ciss
1000
Coss
100
Crss
10
1.0
0.25
0
−50
−25
0
25
50
75
100
125
150
0.1
175
5
10
15
20
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
Figure 9. Gate Threshold Voltage vs.
Temperature
Figure 10. Capacitance vs.
Collector−to−Emitter Voltage
25
12
10
10
SWITCHING TIME (ms)
tfall
8
tdelay
6
VCC = 300 V
VGE = 5.0 V
RG = 1000 W
IC = 9.0 A
RL = 33 W
4
2
0
25
0
TJ, JUNCTION TEMPERATURE (°C)
12
SWITCHING TIME (ms)
VCE = −24 V
1000
50
75
100
125
150
8
VCC = 300 V
VGE = 5.0 V
RG = 1000 W
IC = 9.0 A
L = 300 mH
tdelay
6
tfall
4
2
0
25
175
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (°C)
TJ, JUNCTION TEMPERATURE (°C)
Figure 11. Resistive Switching Fall Time vs.
Temperature
Figure 12. Inductive Switching Fall Time vs.
Temperature
http://onsemi.com
6
175
RqJC(t), TRANSIENT THERMAL RESISTANCE
(°C/Watt)
NGB8206N, NGB8206AN
1
Duty Cycle = 0.5
0.2
0.1
0.1
0.05
0.02
t1
t2
0.01
0.01
0.000001
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT t1
P(pk)
TJ(pk) − TA = P(pk) RqJC(t)
DUTY CYCLE, D = t1/t2
Single Pulse
0.00001
0.0001
0.001
0.01
0.1
1
t,TIME (S)
Figure 13. Best Case Transient Thermal Resistance
(Non−normalized Junction−to−Case Mounted on Cold Plate)
ORDERING INFORMATION
Package
Shipping†
D2PAK
50 Units / Rail
NGB8206NT4G
D2PAK
(Pb−Free)
800 / Tape & Reel
NGB8206ANT4G
D2PAK
(Pb−Free)
800 / Tape & Reel
NGB8206ANTF4G
D2PAK
(Pb−Free)
700 / Tape & Reel
NGB8206ANSL3G
D2PAK
(Pb−Free)
50 Units / Rail
Device
NGB8206NG
(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
7
NGB8206N, NGB8206AN
PACKAGE DIMENSIONS
D2PAK 3
CASE 418B−04
ISSUE K
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 418B−01 THRU 418B−03 OBSOLETE,
NEW STANDARD 418B−04.
C
E
−B−
V
W
4
1
2
A
S
3
−T−
SEATING
PLANE
K
J
G
D 3 PL
0.13 (0.005)
DIM
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
V
W
H
M
T B
M
SOLDERING FOOTPRINT*
P
U
10.49
L
INCHES
MIN
MAX
0.340 0.380
0.380 0.405
0.160 0.190
0.020 0.035
0.045 0.055
0.310 0.350
0.100 BSC
0.080
0.110
0.018 0.025
0.090
0.110
0.052 0.072
0.280 0.320
0.197 REF
0.079 REF
0.039 REF
0.575 0.625
0.045 0.055
MILLIMETERS
MIN
MAX
8.64
9.65
9.65 10.29
4.06
4.83
0.51
0.89
1.14
1.40
7.87
8.89
2.54 BSC
2.03
2.79
0.46
0.64
2.29
2.79
1.32
1.83
7.11
8.13
5.00 REF
2.00 REF
0.99 REF
14.60 15.88
1.14
1.40
STYLE 4:
PIN 1. GATE
2. COLLECTOR
3. EMITTER
4. COLLECTOR
M
8.38
16.155
F
VIEW W−W
2X
3.504
2X
1.016
5.080
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
8
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NGB8206N/D