Product Brief Features: XC2300B - Series 16/32-bit µC for Automotive Safety The XC2300B series, with the XC2336B (LQFP-64) and XC236xB (LQFP-100) derivatives, is the low-end extension of the XC2300 microcontroller family focussing on Safety applications. With a total memory size of up to 320kB Flash and up to 34kB RAM running at up to 80MHz, the microcontrollers of this series are well suited for low-end cost-sensitive safety applicationss like Airbag, low-end Braking or Belt Pretensioner applications. Targeting Automotive Safety Applications Airbag Belt-Pretensioner Low-end Braking Highlights: High performance 16-/32-bit C166SV2 CPU with 5-stage pipeline Single cycle execution with 10ns instruction time Up to 80 MIPS peak performance @ 80MHz CPU clock Up to 320kB Flash with EEPROM emulation Single voltage supply (core supply over embedded voltage regulator) 64pin and 100pin packages High-performance CPU with five-stage pipeline and MPU 16 priority levels providing 96 interrupt nodes 8-channel interrupt-driven data transfer facilities via peripheral event controller (PEC) Hardware CRC-Checker with programmable polynomial to supervise on-chip memory areas Up to 320kB Flash (incl. up to 64kB data Flash for EEPROM emulation), up to 34kB SRAM Memory content protection through Error Correction Code (ECC) Up to 16-channel dual A/D converter, optional data preprocessing (data reduction, range check), open wire detection, conversion time ~0.675μs One 16-channel general purpose capture/compare units (CCU2) Up to two capture/compare units (CCU6) for flexible PWM signal generation for any kind of motor control Multi-functional general purpose timer unit with 5 timers Up to 6 serial interface channels to be used as UART, LIN, SPI, I2C, I2S On-chip MultiCAN interface (Rev. 2.0B active) with 64 message objects, up to 3 CAN nodes On-chip system timer and on-chip real time clock Programmable watchdog timer and oscillator watchdog Up to 76 general purpose I/O lines with flexible pin assignment On-chip bootstrap loader On-chip debug support via Device Access Port (DAP) or JTAG interface Single voltage supply of 3.3 to 5V 64/100-pin green LQFP package, 0.5mm (19.7mil) pitch Temperature range: -40 to +125°C Supported by a large range of development tools www.infineon.com/XC2000 Product Brief XC2300B - Series 16/32-bit µC for Automotive Safety Type Frequency [MHz] eFlash [KByte] RAM [KByte] USIC* Channels CAN Nodes CCU** Modules ADC Channels FlexRay Channels Package SAK-XC2336B-24F80L 80 192 18 4 2 3 9 - LQFP-64 SAK-XC2336B-40F20L 20 320 34 4 2 3 9 - LQFP-64 SAK-XC2336B-40F66L 66 320 34 4 2 3 9 - LQFP-64 SAK-XC2336B-40F80L 80 320 34 4 2 3 9 - LQFP-64 SAH-XC2361B-40F80L 80 320 34 6 2 3 16 - LQFP-100 SAK-XC2363B-24F80L 80 192 18 2 2 3 8 - LQFP-100 SAK-XC2363B-40F80L 80 320 34 2 2 3 8 - LQFP-100 SAK-XC2364B-24F80L 80 192 18 4 2 3 16 - LQFP-100 SAK-XC2364B-40F80L 80 320 34 4 2 3 16 - LQFP-100 SAK-XC2365B-24F80L 80 192 18 6 3 3 16 - LQFP-100 SAK-XC2365B-40F80L 80 320 34 6 3 3 16 - LQFP-100 *Configurable Module: LIN, UART, SSC/SPI, I2C, I2S **Capture Compare Units: CCU6/CCU2 How to reach us: http://www.infineon.com Published by Infineon Technologies AG 81726 Munich, Germany © 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Published by Infineon Technologies AG Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that health of the user or other persons may be endangered. Order Number: 123