AC-AC INVERTER UNIT PS-DA0239-01(S) ( 10 W DUAL OUTPUTS) DESCRIPTION : This low profile AC to AC Inverter is developed for dual lamps. APPLICABLE LCD: 6.4 to 15 inches double lamp type Lamp Voltage 650 Vrms Lamp Current 2 x 7.0 mArms Lamp Start Up Voltage 1.700 Vrms (Vin : 230 Vdc) FEATURES : Open Lamp Detection ??? Efficiency: 70% Min at nominal Input and full load ??? Safety: Meet CE, PSE EMI requirements: CE EN55022 class B, CISPR 22 class B RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH 0°C ~ +40°C -20°C ~ +85°C 95 %RH max 210 x 22 x 16,1 mm Unit : mm Weight :61 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 + CN3 Input side CN1: Pin No. Symbols Vin CN 1-1 N.C. CN 1-2 Neutral CN 1-3 Qty. 1 1 2 Material UL94V-0 (FR-4 or CEM-3) EK500V-03P B3B-XH-A JST or equal Output side CN2: Ratings 90 ~ 264 Vac Pin No. CN 2-1 CN 2-2 Pin No. CN 3-1 CN 3-2 www.Power-Systems.de [email protected] All specifications are subject to change without notice. Symbols Vhigh Vlow Ratings Vrm s (7 m Arm s ) (GND) Output side CN3: Power Systems – The Power Solution Web: Email: Note t=1m m Symbols Vhigh Vlow Ratings Vrm s (7 m Arm s ) (GND) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.2, 2nd September 2010 AC-AC INVERTER UNIT PS-DA0239-01(S) ( 10 W DUAL OUTPUTS) ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Output Current Input Current Frequency Open Circuit Voltage Iout Iin F Vopen Note 1 : Vin (V) 230 230 230 230 Specification Tu (°C) Min. Typ. Max. 0 0 0 0 6.0 27 1.500 7.0 0.5 32 1.700 8.0 37 1.900 ~ +40 ~ +40 ~ +40 ~ +40 Unit Note m Arm s Aac kHz Vrm s Please keep minimum of 6,3mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. TEST CIRCUIT : F Vin 90 ~ 264 Vac A 1000:1 PROBE F V ~ Vopen Iin CN1-1 SW1 V CN2-1 CL1 RL1 N.C. A ~ T1 CN1-2 CN2-3 SW2 Iout1 SW3 CN3-1 CL2 RL2 Neutral CN1-3 CN3-3 SW4 A ~ Iout2 Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.2, 2nd September 2010