LED-CONVERTER UNIT PS-LD0602-021-B(S) (3 W) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile LED converter is developed for Sharp: LQ057Q3DG02 APPLICABLE: 1~6 LED lines (Serial Mode) Pout max. 0,9 Watt per line, total max. 3 Watt LED Voltage max. 35V Lamp Current max. 20 mAdc per line FEATURES : Connector type Internal Open LED Detection for every Line Analog or ext. PWM Dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Wide Input Voltage Range RoHS compliant (S) Available in connector (standard) or pin type. Please ask factory TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH -20°C ~ +70°C -20°C ~ +85°C 95 %RH max 64 x 32 x 6.5 mm Pin type Connector type Weight :5 (g) typ. Components No. 1 2 3 4 5 Part Description PCB Connector CN1 Connector CN3 Connector CN2 Connector CN4 Qty. 1 1 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0890 53261-0790 Pin Pin Note t=1.0mm Molex Molex Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.2.3, 16th May 2014 LED-CONVERTER UNIT PS-LD0602-021-B(S) (3 W) (PRELIMINARY INFORMATION) Input side CN1/CN2: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 CN 1-7 CN 1-8 Output side CN3 / CN4: Symbols Ratings Vin 4.75 ~ 13.2 Vdc Vin 4.75 ~ 13.2 Vdc Vrm t 0 ~ 0.8 = OFF / 2.5 ~ Vin = ON Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH Vbr 0.0 ~ 5.0 (5V=low brightnes s ) GND GND GND Pin No. CN 3-1 CN 3-2 CN 3-3 CN 3-4 CN 3-5 CN 3-6 Symbols RTN6 (-) RTN5 (-) RTN4 (-) RTN3 (-) RTN2 (-) RTN1 (-) Ratings LED LINE 6 RETURN LED LINE 5 RETURN LED LINE 4 RETURN LED LINE 3 RETURN LED LINE 2 RETURN LED LINE 1 RETURN CN 3-7 Vhigh (+) max 30 Vdc (max 30 mAdc) - ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Iout Output Current Imin Output Current Iin Input Current Open Load Shutdown Vbias f(PWM) PWM Frequency Pout Output Power Pout Output Power Pout Output Power Pout Output Power Vin (V) Specification Vbr (V) Tu (°C) 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 0 5 0 0 0 0 0 0 0 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+50 -20~+70 Min. Typ. Max. 18 0.06 150 TBD TBD TBD TBD 20 10 35 3 1.9 0.9 0.6 22 0.3 300 TBD TBD TBD TBD Unit Note mAdc % Adc Vdc Hz Watt Watt Watt Watt Duty 100%, max current duty cycle Tu: -20~+50degC Tu: -20~+70degC For one line For one line DERATING: OUTPUT WATT DC 5V Input DC 12V Input 3,4 3,2 3 2,8 2,6 2,4 2,2 2 1,8 1,6 1,4 1,2 1 50 55 60 65 70 75 80 AMBIENT TEMP. Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.2.3, 16th May 2014 LED-CONVERTER UNIT PS-LD0602-021-B(S) (3 W) (PRELIMINARY INFORMATION) TEST CIRCUIT : Connect Vbr to Ground while using ext. PWM dimming. Vin 4. 75 ~ 13. 2 Vdc Iin A CN1-1 V CN2-7 CN1-2 Vrmt 1. 5 / 2. 5 Vdc D1 D1 D2 D2 D6 D6 a V Ext. PWM 0. 0 ~ Vin b SW1 CN1-3 CN1-4 SW2 c Vbr 0. 0 ~ 5. 0 Vdc CN1-5 SW3 CN2-1 A ~ CN2-6 A ~ CN1-6 CN1-7 CN1-8 Note 1 : Note 2 : Note 3: Do not use analog dimming and external PWM dimming at the same time. External PWM-signal is LOW active. Do not use output 1 when you need to connect only 5 or less outputs. Examples: Connect pin 2+3+4+5+6 when only 5 are needed. CABLES : for input: 500 mm, stripped and tinned ends, order key <input cable #13> for output: 500 mm, stripped and tinned ends, order key <input cable #4> VERSIONS : Standard connectors for both input and output. Pin type version can also be attained ( Please ask factory). Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (3) Version 1.2.3, 16th May 2014