Air to Air Thermoelectric Assembly ATS PART # ATS-FF-200W-12-C ATS’ air to air thermoelectric assemblies are heat exchangers that remove heat from an enclosure and are designed for temperature regulation of small electronic cabinets or enclosures. They are often used when it is better to circulate cooled air rather than use direct contact with a cold plate. FEATURES & BENEFITS » Compact and lightweight » Simple quick installation » Can be mounted in any orientation » Air to air heat exchanger » No compressor » Quiet operation » Virtually maintenance free » Uses thermoelectrics SPECIFICATION Max Cooling power TEC Voltage TEC Current Fan Voltage For Illustration Purposes ONLY. 140W @ ∆T = 0°C 12 VDC Start 27.0 A / Working 23A 12 VDC APPLICATIONS » Enclosure or cabinet cooling » Electronics cooling » Medical, surgical and biological process cooling » Thermal management » Medical equipment » Refrigerators and water coolers » Industrial storage and food transportation Product Detail Max Cooling TEC TEC Power Voltage Current 140W 12V 23A Hot Side Fan Cold Side Fan 172x172x51 mm 120x120x38 mm 12V, 0.8A 12V, 0.5A Operating Temperature Dimensions (mm) Mounting Holes (mm) Weight -10° – 70° 400x180x197.3 300x120 7.1 Kgs NOTES: 1. Please use 24 VDC power supply with the ripple less than 10% 2. Please do not drop, or the TEC can get damaged. 3. Please keep 10cm distance from walls for proper ventilation when mounting. 4. Please do not use it when temperature of the assembly or environment is higher than 70°C. 5. The graph is an example of when cabinet temperature is 50°C and the ambient temp is 50°C, the cooler can transfer 140W heat from the cabinet to outside. 6. ∆T = Tenclosure - Tambient 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM