DC-AC INVERTER UNIT PS-M06D05S5-NJ4L-088(S) (6,5 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile DC/AC inverter is developed for dual lamps. Optimized for Toshiba : LTD104C11S APPLICABLE LCD: 6.4 to 12 inches type double lamps Lamp voltage 516 Vrms Lamp current 6 mArms Lamp Start Up Voltage 1.500 Vrms (Vin : 5 Vdc) FEATURES : Remote ON/OFF Ext. PWM dimming function RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range -10°C ~ +60°C Storage Temperature Range -20°C ~ +85°C Humidity 95 %RH max LxWxH 82 ± 0.3 13 ± 0.5 PS-MXXDXX-NJX 29/01/2004 MADE IN GERMANY CN1-1 CN2 (2) CN1 15 ± 0.3 22,5 ± 0.5 105 x 22,5 x 10mm 105 ± 0.5 5 ± 0.5 DIMENSIONS : CAUTION HIGH VOLTAGE CN2-4 CN2-1 10.0MAX CN1-5 3 2 - Ø2.5 ± 0.2 (for M2 screws) 2 (2) 1 Unit : mm Weight :20 (g) typ. High Voltage generation area 60mm Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Input side CN1: Pin No. Symbols Vin CN 1-1 GND CN 1-2 CN 1-3 Ext. PWM N.C. CN 1-4 CN 1-5 Vrm t Qty. 1 1 1 Ratings 5 Vdc 0 ~ 5 Vdc (L activ) Material UL94V-0 (FR-4 or CEM-3) S5B-PH-SM3 SM04(4.0)B-BHS Output side CN2: Pin No. Symbols Vhigh CN 2-1+2 N.C. CN 2-3 Vlow CN 2-4 Note t=1.6m m JST or equal JST or equal Ratings 516 Vrm s (6 m Arm s ) 0 Vdc 0 / 5 Vdc (H activ) Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.3, 20th May 2014 DC-AC INVERTER UNIT PS-M06D05S5-NJ4L-088(S) (6,5 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) ELECTRICAL CHARACTERISTICS : Parameters Symbols Conditions Vrmt Vin (V) Tu (°C) (V) Iout 5±0.05 5±0.25 -10 ~ +60 Output Current Iout Iin F Vopen Output Current Input Current Frequency Open Circuit Voltage Note 1 : 5±0.5 5±0.5 5±0.5 4.75 5±0.25 5±0.25 5±0.25 5±0.25 -10 -10 -10 -10 Specification Unit Note 6.5 m Arm s Duty 100% 6.6 2.5 70 - m Arm s Adc kHz Vrm s Min. Typ. Max. 5.0 6.0 6.0 1.6 60 - ~ +60 5.4 ~ +60 ~ +60 50 ~ +60 1.500 Please keep a minimum of 2mm clearance in all directions between inverter high voltage areas and any conductors as marked on mechanical drawing. Remote ON/OFF (CN1-5) has priority and can not be used in combination with External PWM Dimming (CN1-3). When 'Ext.PWM' (CN1-3) is used 'Vrmt' (CN1-5) should not be connected. The external PWM-frequency should be within the range of 100 ~ 500Hz. For other frequencies please request. The optimum frequency is normally 250 Hz and this minimizes the interference of the vertical sync frequency. Note 2: Note 3: TEST CIRCUIT : F Vin 5V A Iin 1000:1 PROBE F SW 1 Vopen V ~ CN1-1 SW3 V CN2-1 CN1-2 Operation of unit a Operation b Non operation SW4 CN1-3 T1 CN2-2 RL2 Ext. PWM* 0~5V A NC Vrmt 2.5 Vdc ~ Vin RL1 CL2 SW5 a V b A ~ Iout ~ Iout1 2 CN1-4 CN2-4 SW1 CN1-5 *) Only active when Vrmt is 0 Vdc or floating EXTERNAL PWM-DIMMING ( Remote ON / OFF Detailed Circuit Diagram ): Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.3, 20th May 2014