Download

TWN4 MULTITECH HF MINI READER*
13.56MHz Contactless Reader/Writer
*Previously
known as TWN4 Mini Reader MIFARE NFC
Elatec’s TWN4 MultiTech HF Mini Reader is designed for integration into machines, handheld computers or any other
human interface devices such as displays, panels, etc. The focus has especially been set on size, flexibility and price.
Thanks to its compact dimensions, integration directly on a PC board is possible.
The TWN4 Simple Protocol enables quick software development cycles. All host communication is done via USB or
asynchronous serial CMOS/TTL interface. The module offers positions for placement of two LEDs that can be
controlled by software.
An external Secure Access Module (SAM) is supported for enhanced security and cryptographic performance. This
enables the application to perform secure transactions.
Key Features:
 3.15 – 5.5 V DC
 Powerful SDK for writing Apps which are executed directly on the reader
 Infield Upgradeable
 Direct chip-commands support
 Onboard 18kB flash storage
 Compact design (33x30x11mm)
 Integrated antenna
 USB, Serial (logical level 3.3V, CMOS 5V tolerant), SPI2), Clock/Data3), Wiegand3), 1-Wire2)
 Firmware based on versatile TWN4 technology
 4 GPIOs
 Supports connection of ISO7816 compatible SAM cards
 Industrial operating temperature: -25°C to +80°C
 Pin Compatible Upgrade from Mini Reader T3MR-F
 Step Model Data on request
Technical Data
Frequency
Housing
Dimensions (L x W x H)
Power Supply
Current Consumption
Temperature Range
Read-/Write Distance
HOST Interface
OS Support
Transmission Speed
Modes of Operation
Relative Humidity
Antenna
Supported
Transponders
Certifications
MTBF
Weight
13.56 MHz
None
32.6mm x 30.1mm x 11.2mm / 1.28inch x 1.19inch x 0.44inch
3.15 – 5.5 V DC
RF field on: typically 110mA
Operating: -25°C up to +80°C (-13°F up to +176°F)
Storage: -40°C up to +85°C (-40°F up to +185°F)
Up to 7cm / 2.75inch depending on tag and environment
USB, serial (logical level 3.3V,CMOS 5V tolerant), SPI2), Clock/Data3), Wiegand3), 1-Wire2))
Windows XP, Vista, Embedded CE2) , 7(32-/64-bit), 8, 8.1,10, Linux, Android, iOS2), MAC OS X2)
HOST: USB: Full speed (12Mbit)
AIR: up to 848Kbit/s
 USB keyboard emulation – USB virtual COM port – Transparent (direct chip-commands support)
 CCID and PC/SC 2.011)
5% to 95% non-condensing
Integrated
Standard
 13.56MHz / ISO14443A: MIFARE Classic, Classic 1k & 4k EV17), Mini, DESFire EV1, Plus S&X, Pro X8), SmartMX8),
Ultralight, Ultralight EV17), Ultralight C, SLE44R35, SLE66Rxx (my-d move), LEGIC Advant5), PayPass8), NTAG2XX7)
 13.56MHz / ISO14443B: Calypso8) incl. Innovatron radio protocol 14443-B'6), CEPAS8), HID iCLASS5), Moneo8), PicoPass8),
SRI512, SRT512, SRI4K, SRIX4K
 13.56MHz / ISO15693: EM4x338), EM4x358), HID iCLASS5), ICODE SLI, LEGIC Advant5), M24LR16/64, Tag-it,
SRF55Vxx (my-d vicinity)8), PicoPass8)
 13.56MHz / ISO18092 / NFC: NFCIP-1: Active and passive communication mode, Peer-to-Peer, NFC Forum Tag Type 1-4,
Sony FeliCa9)
Version I10)
Standard + HID iCLASS, HID iCLASS SE/SR/SEOS (CSN and Facility Code/PAC)6)
CE, WEEE, RoHS-II compliant
500,000 hours
Approx. 4g
TWN4 MultiTech HF Mini Reader
Option USB
Development Board TWN4 MultiTech HF Mini Reader
T4MR-F-U
T4MR-F-UI
T4MK-F, including T4MR-F
Order Code
Standard T4MR-F
Version I T4MR-F-I
1)In
Preparation 2)On Request Only 3)External Interface Required 5)UID Only 6)UID Only, read/write On Request 7)r/w enhanced security features on request 8)r/w in direct chip command mode
public area 10) Version I requires external TWN4 SIO Card
Drawing (Component Side)
Pin spacing 2.54mm
9)UID
+ r/w
Pinning
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Name
RESET
PWRDWN
GND
VCC
RXD/USB+
TXD/USBRes.
Res.
VSAM
SAM_IO
GPIO3
GPIO2
GPIO1
GPIO0
SAM_CLK
SAM_RST
Description
Hard reset (input, low active, logic level, internally pulled-up)
Turn off voltage regulator (input, low active, logic level, internally pulled-up)
Ground (USB black wire)
Power supply input (3.15 – 5.5V, USB red wire)
UART RXD/USB Data+ (USB green wire)
UART TXD/USB Data- (USB white wire)
Reserved for future use (SCK from SPI host interface).
Reserved for future use (SS- from SPI host interface).
3.0V regulated supply for SAM
Bidirectional SAM I/O line
General purpose input/output 3
General purpose input/output 2
General purpose input/output 1
General purpose input/output 0
SAM clock output
SAM reset output
Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the
use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own
responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names are registered trademarks. © 2015 Elatec GmbH – DocRev7 – 08/2015
Elatec GmbH
Zeppelinstr. 1
82178 Puchheim
Germany
Phone: +49 89 5529961 0
Fax: +49 89 5529961 129
[email protected]
www.elatec-rfid.com
Similar pages