Fujitsu Microelectronics Europe User Guide FMEMCU- UG-910004-14 MB91360 SERIES STARTERKIT ADAPTER STARTERKITMB91360-ADA160 USER GUIDE STARTERKITMB91360-ADA160 Revision History Revision History Date 22/01/2003 06/02/2003 02/03/2007 05/09/2008 09/01/2009 Issue Ver. 1.0 Initial version Ver. 1.1 Typos corrected Ver. 1.2 Recycling Note added Ver. 1.3 China-RoHS regulation added Ver. 1.4, Information WWW updated This document contains 18 pages. UG-910004-14 -2- © Fujitsu Microelectronics Europe GmbH STARTERKITMB91360-ADA160 Warranty and Disclaimer Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for STARTERKITMB91360-ADA160 and all its deliverables (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the Product and any consequential damages in cases of unauthorised decompiling and/or reverse engineering and/or disassembling. Note, the STARTERKITMB91360-ADA160 and all its deliverables are intended and must only be used in an evaluation laboratory environment. 1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in accordance with the accompanying written materials for a period of 90 days form the date of receipt by the customer. Concerning the hardware components of the Product, Fujitsu Microelectronics Europe GmbH warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer. 2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability and the customer´s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer´s use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH. 3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated. 4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s and its suppliers´ liability is restricted to intention and gross negligence. NO LIABILITY FOR CONSEQUENTIAL DAMAGES To the maximum extent permitted by applicable law, in no event shall Fujitsu Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product. Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect © Fujitsu Microelectronics Europe GmbH -3- UG-910004-14 STARTERKITMB91360-ADA160 Contents Contents REVISION HISTORY ............................................................................................................ 2 WARRANTY AND DISCLAIMER ......................................................................................... 3 CONTENTS .......................................................................................................................... 4 0 INTRODUCTION .............................................................................................................. 5 1 INTERFACING THE MB91360 STARTER KIT TO THE STARTERKITMB91360-ADA160 AND PROBE CABLE....................................................................................................... 6 2 APPENDIX....................................................................................................................... 7 2.1 Pin comparision....................................................................................................... 7 2.2 Figures .................................................................................................................. 13 3 RELATED PRODUCTS ................................................................................................. 14 4 INFORMATION IN THE WWW....................................................................................... 15 5 CHINA-ROHS REGULATION ........................................................................................ 16 6 RECYCLING .................................................................................................................. 18 UG-910004-14 -4- © Fujitsu Microelectronics Europe GmbH STARTERKITMB91360-ADA160 Introduction 0 Introduction The Starterkit91360 is the Evaluation board for MB91360 series. It is equipped with MB91F362G series (208-pin). When using a 160-pin derivate (MB91F369G) the adapter board STARTERKITMB91360ADA160 is mapping the pins to the functions on the Starterkit91360. © Fujitsu Microelectronics Europe GmbH -5- UG-910004-14 STARTERKITMB91360-ADA160 Chapter 1 Interfacing the MB91360 Starter Kit to the STARTERKITMB91360-ADA160 and probe Cable 1 Interfacing the MB91360 Starter Kit to STARTERKITMB91360-ADA160 and probe Cable the The MB91F369 is a 160-pin derivative of the MB91360 family processors. The MB91F369 is packaged in the FTP-160P-M15. In order to allow users to develop applications on the MB91360 Starter Kit, an adaptor board and Probe Cable have been developed. The Adapter Board (STARTERKITMB91360-ADA160), which converts the MB91F362G pin out to the MB91F369G pin out, can be fitted to the Starter Kit with the use of Pin Headers. For the Adapter board to be fitted correctly, the MB91F362G MCU and socket cap must be removed from the Starter kit. The Adapter Board is fitted with an NQPACK160SD enabling the user to fit either an MCU or the Probe Cable. The Probe cable interfaces between the Emulator MB2197-01 and the NQPACK160SD. Please note the direction of the probe cable when fitted onto the Starter Kit. Also included is a pin cross-reference between the MB91FV360G and MB91F369G. The following diagram shows the starter kit assembled with the STARTERKITMB91360ADA160 Adapter board and probe cable. Figure 1 Diagram showing how to connect the STARTERKITMB91360-ADA160 Adapter board and Probe Cable to the MB91360 Starter Kit UG-910004-14 -6- © Fujitsu Microelectronics Europe GmbH STARTERKITMB91360-ADA160 Chapter 2 Appendix 2 Appendix 2.1 Pin comparision Pin Function Port Function (Where specified) MB91F362G MB90F369G Pin Number Pin Number MB91360 Starter Kit Pin AS P90 43 29 JP25 ALE P91 44 30 JP25 AH/BOOT P93 46 31 SW1 CS0X P94 47 32 JP25 CS1X P95 48 33 JP25 CS2X P96 49 34 JP25 CS3X P97 50 35 JP25 DREQ PB0 61 36 JP25 DACK0 PB1 62 37 JP25 DEOP0 PB2 63 38 JP25 AN8 PG0 53 52 LCD AN9 PG1 54 53 LCD AN10 PG2 55 LCD AN11 PG3 56 LCD AN12 PG4 57 LCD AN13 PG5 58 LCD AN14 PG6 59 LCD AN15 PG7 60 LCD AN0 PH0 66 44 JP16 AN1 PH1 67 45 JP16 AN2 PH2 68 46 JP16 AN3 PH3 69 47 JP16 AN4 PH4 70 48 JP16 AN5 PH5 71 49 JP16 AN6 PH6 72 50 JP16 AN7 PH7 73 51 JP16 ATGX PI3 80 57 JP16 LED0 PJ0 84 LED LED1 PJ1 85 LED LED2 PJ2 86 LED © Fujitsu Microelectronics Europe GmbH -7- UG-910004-14 STARTERKITMB91360-ADA160 Chapter 2 Appendix Pin Function Port Function (Where specified) MB91F362G MB90F369G Pin Number Pin Number LED3 PJ3 87 LED LED4 PJ4 88 LED LED5 PJ5 89 LED LED6 PJ6 90 LED LED7 PJ7 91 LED INT0 PK0 94 68 JP20 INT1 PK1 95 69 JP20 INT2 PK2 96 70 JP20 INT3 PK3 97 71 JP20 INT4 PK4 98 72 JP20 INT5 PK5 99 73 JP20 INT6 PK6 100 74 JP20 INT7 PK7 101 75 JP20 IN0 PL0 102 JP20 IN1 PL1 103 JP20 IN2 PL2 104 JP20 IN3 PL3 105 JP20 OUT0 PL4 106 JP20 OUT1 PL5 107 JP20 OUT2 PL6 108 JP20 OUT3 PL7 109 JP20 SGO PM0 126 76 JP16 SGA PM1 127 77 JP16 SDA PM2 128 78 JP20 SCL PM3 129 79 JP20 SOT4 PN0 130 80 JP14 SIN4 PN1 131 81 JP14 SCK4 PN2 132 82 JP14 SIN3 PN3 133 83 JP14 SOT3 PN4 134 84 JP14 SCK3 PN5 135 85 JP14 OCPA0 PO0 136 101 JP15 OCPA1 PO1 137 102 JP15 OCPA2 PO2 138 103 JP15 OCPA3 PO3 139 104 JP15 UG-910004-14 -8- MB91360 Starter Kit Pin © Fujitsu Microelectronics Europe GmbH STARTERKITMB91360-ADA160 Chapter 2 Appendix Pin Function Port Function (Where specified) MB91F362G MB90F369G Pin Number Pin Number OCPA4 PO4 143 JP15 OCPA5 PO5 141 JP15 OCPA6 PO6 142 JP15 OCPA7 PO7 143 JP15 TX0 PP0 146 93 JP14 RX0 PP1 147 94 JP14 TX1 PP2 148 95 JP14 RX1 PP3 149 96 JP14 TX2 PP4 150 JP14 RX2 PP5 151 JP14 SIN0 PQ0 152 97 JP14 SOT0 PQ1 153 98 JP14 SIN1 PQ2 154 JP14 SOT1 PQ3 155 JP14 SIN2 PQ4 156 JP14 SOT2 PQ5 157 JP14 PWM1P0 PR0 162 JP15 PWM1M0 PR1 163 JP15 PWM2P0 PR2 164 JP15 PWM2M0 PR3 165 JP15 PWM1P1 PR4 167 JP15 PWM1M1 PR5 168 JP15 PWM2P1 PR6 169 JP15 PWM2M1 PR7 170 JP15 PWM1P2 PS0 172 JP15 PWM1M2 PS1 173 JP15 PWM2P2 PS2 174 JP15 PWM2M2 PS3 175 JP15 PWM1P3 PS4 177 JP15 PWM1M3 PS5 178 JP15 PWM2P3 PS6 179 JP15 PWM2M3 PS7 180 JP15 VDD 25 56 VSS 26 11 VDD 51 66 © Fujitsu Microelectronics Europe GmbH -9- MB91360 Starter Kit Pin UG-910004-14 STARTERKITMB91360-ADA160 Chapter 2 Appendix Port Function (Where specified) MB91F362G MB90F369G Pin Number Pin Number VSS 52 22 VDD 79 99 VSS 78 39 AVRH 65 41 AVCC 64 42 AVSS 74 43 DA0 (MB91F365GA) 75 X0A (MB91F366G) 121 DA1 (MB91F365GA) 76 X1A (MB91F366G) 122 ALARM 77 54 VSS 93 55 TESTX 81 63 CPUTESTX 82 64 VDD 92 109 X0 119 106 X1 120 107 VSS 110 67 MONCLK 116 110 VDD 144 VCC3/C 159 91 VSS 123 86 VDD 160 MD0 111 58 SW1 MD1 112 59 SW1 MD2 113 60 SW1 INITX 115 62 JP25 VDD 182 VSS 145 92 VSS 158 100 VDD 108 Pin Function VSS MB91360 Starter Kit Pin JP16 JP16 JP16 108 VDD HVSS 171 HVDD 166 UG-910004-14 - 10 - © Fujitsu Microelectronics Europe GmbH STARTERKITMB91360-ADA160 Chapter 2 Appendix Pin Function Port Function (Where specified) MB91F362G MB90F369G Pin Number Pin Number MB91360 Starter Kit Pin HVSS 161 HVDD 176 HVSS 181 VDD A0 9 157 JP25 A1 10 158 JP25 A10 19 7 JP25 A11 20 8 JP25 A12 21 12 JP25 A13 22 13 JP25 A14 23 14 JP25 A15 24 15 JP25 A16 27 16 JP25 A17 28 17 JP25 A18 29 18 JP25 A19 30 19 JP25 A2 11 159 JP25 A20 31 20 JP25 A3 12 160 JP25 A4 13 1 JP25 A5 14 2 JP25 A6 15 3 JP25 A7 16 4 JP25 A8 17 5 JP25 A9 18 6 JP25 BGRNTX 36 27 JP25 BRQ 37 28 JP25 CLK 45 10 JP25 CP0 124 CS4X 32 23 JP25 CS5X 33 24 JP25 CS6X 34 25 JP25 D0 183 121 JP24 D1 184 122 JP24 D10 193 131 JP24 © Fujitsu Microelectronics Europe GmbH - 11 - UG-910004-14 STARTERKITMB91360-ADA160 Chapter 2 Appendix Port Function (Where specified) MB91F362G MB90F369G Pin Number Pin Number MB91360 Starter Kit Pin D11 194 132 JP24 D12 195 133 JP24 D13 196 134 JP24 D14 107 135 JP24 D15 200 136 JP24 D16 201 139 JP24 D17 202 140 JP24 D18 203 141 JP24 D19 204 142 JP24 D2 185 123 JP24 D20 205 143 JP24 D21 206 144 JP24 D22 207 145 JP24 D23 208 146 JP24 D24 1 147 JP24 D25 2 148 JP24 D26 3 149 JP24 D27 4 150 JP24 D28 5 151 JP24 D29 6 152 JP24 D3 186 124 JP24 D30 7 153 JP24 D31 8 154 JP24 D4 187 125 JP24 D5 188 126 JP24 D6 189 127 JP24 D7 190 128 JP24 D8 191 129 JP24 D9 192 130 JP24 HSTX 114 61 LTESTX 83 65 RDX 38 26 JP25 RDY 35 118 JP25 SELCLK 117 VCI 125 Pin Function UG-910004-14 - 12 - © Fujitsu Microelectronics Europe GmbH STARTERKITMB91360-ADA160 Chapter 2 Appendix Pin Function Port Function (Where specified) MB91F362G MB90F369G Pin Number Pin Number VDD35 9 VDD35 21 VDD35 40 VDD35 112 VDD35 119 VDD35 137 VDD35 155 VDDI 87 VDDI 88 VDDI 89 VDDI 90 VDDX 118 105 VSS 199 156 VSS 111 VSS 113 VSS 120 VSS 138 MB91360 Starter Kit Pin WR0X 39 117 JP25 WR1X 43 116 JP25 WR2X 41 115 JP25 WR3X 42 114 JP25 Figure 2: Table comparing Pin and functions for the MB91FV360 series, MB91F362G and MB91F369G NOTE: N.C. : Not connected 2.2 Figures Figure 1 Diagram showing how to connect the STARTERKITMB91360-ADA160 Adapter board and Probe Cable to the MB91360 Starter Kit.................................................. 6 Figure 2: Table comparing Pin and functions for the MB91FV360 series, MB91F362G and MB91F369G .................................................................................................... 13 © Fujitsu Microelectronics Europe GmbH - 13 - UG-910004-14 STARTERKITMB91360-ADA160 Chapter 3 Related Products 3 Related Products < Starterkit91360 Evaluation board for MB91360 series < MB2197-01 Emulator debugger main unit < MB2197-10 DSU Probe Cable < MB2197-120 Adapter board for MB91FV360G Evaluation device < MB2197-127 Probe cable for 208-pin socket (MB91F362G) < FR360-PROBE-120 Probe Cable for 120 pin devices (MB91F365G/366G/367G/368G/376G) < FR360-PROBE-160 Probe Cable for 160 pin devices (MB91F369G) < NQPACK160SB Socket for package FPT-160P-M15 (Tokyo Eletech Corp. www.tetc.co.jp/e_tet.htm) < HQPACK160SB Header for NQPACK160SB UG-910004-14 - 14 - © Fujitsu Microelectronics Europe GmbH STARTERKITMB91360-ADA160 Chapter 4 Information in the WWW 4 Information in the WWW Information about FUJITSU MICROELECTRONICS Products can be found on the following Internet pages: Microcontrollers (8-, 16- and 32bit), Graphics Controllers Datasheets and Hardware Manuals, Support Tools (Hard- and Software) http://www.fme.gsdc.de/gsdc.htm Memory products: Flash, SDRAM and FRAM http://www.fme.fujitsu.com/products/memory/index1.html Linear Products: Power Management, A/D and D/A Converters http://www.fme.fujitsu.com/products/linear/start.html Media Products: SAW filters, acoustic resonators and VCOs http://www.fme.fujitsu.com/products/media/index1.html For more information about FUJITSU MICROELECTRONICS http://www.fme.fujitsu.com/products/start.html © Fujitsu Microelectronics Europe GmbH - 15 - UG-910004-14 STARTERKITMB91360-ADA160 Chapter 5 China-RoHS regulation 5 China-RoHS regulation Evaluation Board评估板 Emulation Board 仿真板 根据SJ/T11364-2006 《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信息。 The following product pollution control information is provided according to SJ/T11364-2006 Marking for Control of Pollution caused by Electronic Information Products. 1．电子信息产品污染控制标志说明 Explanation of Pollution Control Label 该标志表明本产品含有超过中国标准SJ/T11363-2006 《电子信息产品中有毒有害物质的限量要求》中限量的有毒有害物质。标志中的数字为本产品 的环保使用期，表明本产品在正常使用的条件下，有毒有害物质不会发生外泄或突变，用户使 用本产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限，单位为年。 为保证所申明的环保使用期限，应按产品手册中所规定的环境条件和方法进行正常使用，并严 格遵守产品维修手册中规定的定期维修和保养要求。 产品中的消耗件和某些零部件可能有其单独的环保使用期限标志，并且其环保使用期限有可能 比整个产品本身的环保使用期限短。应到期按产品维修程序更换那些消耗件和零部件，以保证 所申明的整个产品的环保使用期限。 本产品在使用寿命结束时不可作为普通生活垃圾处理，应被单独收集妥善处理。 请注意：环保使用期限50年的指定不是与产品的耐久力，使用期限或任何担保要求等同的。 This symbol to be added to all EIO sold to China, indicates the product contains hazardous materials in excess of the limits established by the Chinese standard SJ/T11363-2006 Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. The number in the symbol is the Environment-friendly Use Period (EFUP), which indicates the period, starting from the manufacturing date, during which the toxic or hazardous substances or elements contained in electronic information products will not leak or mutate under normal operating conditions so that the use of such electronic information products will not result in any severe environmental pollution, any bodily injury or damage to any assets, the unit of the period is “Year”. UG-910004-14 - 16 - © Fujitsu Microelectronics Europe GmbH STARTERKITMB91360-ADA160 Chapter 5 China-RoHS regulation In order to maintain the declared EFUP, the product shall be operated normally according to the instructions and environmental conditions as defined in the product manual, and periodic maintenance schedules specified in Product Maintenance Procedures shall be followed strictly. Consumables or certain parts may have their own label with an EFUP value less than the product. Periodic replacement of those consumables or parts to maintain the declared EFUP shall be done in accordance with the Product Maintenance Procedures. This product must not be disposed of as unsorted municipal waste, and must be collected separately and handled properly after decommissioning. Please note: The designation of 10 years EFUP is not to be equated with the durability, useduration or any warranty-claims of the product. 产品中有毒有害物质或元素的名称及含量 Table of hazardous substances name and concentration 有毒有害物质或元素 部件名称 Hazardous substances name Component Name Starterkitmb91360-ada160 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) x o o o o o O: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要求 • 此表所列数据为发布时所能获得的最佳信息 • 由于缺少经济上或技术上合理可行的替代物质或方案，此医疗设备运用以上一些有毒有害物质来实现设备的预期 临床功能，或给人员或环境提供更好的保护效果。 O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. • Data listed in the table represents best information available at the time of publication © Fujitsu Microelectronics Europe GmbH - 17 - UG-910004-14 STARTERKITMB91360-ADA160 Chapter 6 Recycling 6 Recycling Gültig für EU-Länder: Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische Gesetze nehmen wir dieses Gerät wieder zurück. Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a 63225 Langen Valid for European Union Countries: According to the European WEEE-Directive and its implementation into national laws we take this device back. For disposal please send the device to the following address: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a 63225 Langen UG-910004-14 - 18 - © Fujitsu Microelectronics Europe GmbH