SHD176244 SHD176244B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 5144, REV. C.2 HERMETIC POWER SCHOTTKY RECTIFIER 175 C Maximum Operation Temperature Add suffix "S" to the part number(s) for S-100 Screening. DESCRIPTION: A 100V, 15A, POWER SCHOTTKY RECTIFIER IN HERMETIC SHD-1/1B HP PACKAGE. RATING PEAK INVERSE VOLTAGE O MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT SYMBOL MAX. UNITS PIV 100 Volts IO 15 Amps IFSM 280 Amps CT 600 pF 1.7 C/W Top/Tstg -65 to + 175 C SYMBOL MAX. UNITS Vf 0.84 Volts Ir 0.35 (t=8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE R JC ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps) TJ = 25 C TJ = 125 C 0.68 MAXIMUM REVERSE CURRENT (Ir @ 100V PIV) TJ = 25 C TJ = 125 C ©2010 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] 8.0 mA SHD176244 SHD176244B SENSITRON DATA SHEET 5144, REV. C.2 MECHANICAL DIMENSIONS: In Inches / mm SHD-1 HP SHD-1B HP ©2010 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD176244 SHD176244B SENSITRON DATA SHEET 5144, REV. C.2 Typical Forward Characteristics Typical Reverse Characteristics 1 200 °C 175 °C 100 200 °C 175 °C 100 150 °C 125 °C 10-1 100 °C 10-2 75 °C 50 °C 10-3 25 °C 10-4 125 °C 0 20 40 60 80 Reverse Voltage - VR (V) 100 120 Typical Junction Capacitance 25 °C -1 10 Junction Capacitance - CT (pF) Instantaneous Forward Current - IF (A) 10 Instantaneous Reverse Current - IR (mA) 101 10-2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - VF (V) 0.8 400 300 200 100 0 20 40 60 80 Reverse Voltage - VR (V) 100 120 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the late st version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medic al equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semico nductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permissio n of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2010 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]