Data Sheet

74HC153-Q100; 74HCT153-Q100
Dual 4-input multiplexer
Rev. 3 — 23 January 2014
Product data sheet
1. General description
The 74HC153-Q100; 74HCT153-Q100 is a dual 4-input multiplexer. The device features
independent enable inputs (nE) and common data select inputs (S0 and S1). For each
multiplexer, the select inputs select one of the four binary inputs and routes it to the
multiplexer output (nY). A HIGH on E forces the corresponding multiplexer outputs LOW.
Inputs include clamp diodes. This enables the use of current limiting resistors to interface
inputs to voltages in excess of VCC.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
 Automotive product qualification in accordance with AEC-Q100 (Grade 1)
 Specified from 40 C to +85 C and from 40 C to +125 C
 Input levels:
 For 74HC153-Q100: CMOS level
 For 74HCT153-Q100: TTL level
 Non-inverting outputs
 Separate enable input for each output
 Common select inputs
 Complies with JEDEC standard no. 7A
 Permits multiplexing from n lines to 1 line
 Enable line provided for cascading (n lines to 1 line)
 ESD protection:
 MIL-STD-883, method 3015 exceeds 2000 V
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
 Multiple package options
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
3. Ordering information
Table 1.
Ordering information
Type number
Package
74HC153D-Q100
Temperature range
Name
Description
40 C to +125 C
SO16
plastic small outline package; 16 leads; body width SOT109-1
3.9 mm
40 C to +125 C
TSSOP16
plastic thin shrink small outline package; 16 leads; SOT403-1
body width 4.4 mm
74HCT153D-Q100
74HC153PW-Q100
74HCT153PW-Q100
Version
4. Functional diagram
1
6
5
4
3
6
5
4
3
10
11
12
14
13
2
14
Fig 1.
1I0 1I1 1I2 1I3 2I0 2I1 2I2 2I3
S0
10
2
S1
11
1
1E
12
15
2E
13
Logic symbol
74HC_HCT153_Q100
Product data sheet
1Y
2Y
7
9
2E
1I0
1I1
1I2
1Y
MUX
7
1I3
S0
S1
2I0
2I1
2I2
2Y
MUX
9
2I3
2E
15
001aal843
Fig 2.
001aal844
Functional diagram
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
2 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
1E
1I3
1I2
1I1
1I0
S0
S1
2I3
2I2
1Y
Fig 3.
2I1
2Y
2I0
2E
001aal845
Logic diagram
5. Pinning information
5.1 Pinning
+&4
+&74
( 9&&
6 (
, 6
( 9&&
, ,
6 (
O 6
+&4
+&74
, ,
O O
, ,
O O
O O
< O
*1' <
< ,
*1' <
DDD
Fig 4.
Pin configuration SO16
74HC_HCT153_Q100
Product data sheet
DDD
Fig 5.
Pin configuration TSSOP16
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
3 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
5.2 Pin description
Table 2.
Pin description
Symbol
Pin
Description
1E, 2E
1, 15
output enable inputs (active LOW)
S0, S1
14, 2
data select inputs
1I0, 1I1, 1I2, 1I3
6, 5, 4, 3
data inputs source 1
1Y
7
multiplexer output source 1
GND
8
ground (0 V)
2Y
9
multiplexer output source 2
2I0, 2I1, 2I2, 2I3
10, 11, 12, 13
data inputs source 2
VCC
16
supply voltage
6. Functional description
Table 3.
Function table
H = HIGH voltage level; L = LOW voltage level; X = don’t care.
select Inputs
data inputs
output enable
output
S0
S1
nI0
nI1
nI2
nI3
nE
nY
X
X
X
X
X
X
H
L
L
L
L
X
X
X
L
L
L
L
H
X
X
X
L
H
H
L
X
L
X
X
L
L
H
L
X
H
X
X
L
H
L
H
X
X
L
X
L
L
L
H
X
X
H
X
L
H
H
H
X
X
X
L
L
L
H
H
X
X
X
H
L
H
7. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
VCC
supply voltage
Conditions
Min
Max
Unit
0.5
+7
V
-
20
mA
-
20
mA
-
25
mA
50
mA
IIK
input clamping current
VI < 0.5 V or VI > VCC + 0.5 V
[1]
IOK
output clamping current
VO < 0.5 V or VO > VCC + 0.5 V
[1]
IO
output current
0.5 V < VO < VCC + 0.5 V
ICC
supply current
-
IGND
ground current
50
-
mA
Tstg
storage temperature
65
+150
C
74HC_HCT153_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
4 of 15
NXP Semiconductors
74HC153-Q100; 74HCT153-Q100
Dual 4-input multiplexer
Table 4.
Limiting values …continued
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Ptot
Conditions
[2]
total power dissipation
Min
Max
Unit
-
500
mW
[1]
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2]
For SO16 package: Ptot derates linearly with 8 mW/K above 70 C.
For TSSOP16 packages: Ptot derates linearly with 5.5 mW/K above 60 C.
8. Recommended operating conditions
Table 5.
Recommended operating conditions
Voltages are referenced to GND (ground = 0 V)
Symbol Parameter
Conditions
74HC153-Q100
Min
Typ
74HCT153-Q100
Max
Min
Typ
Unit
Max
VCC
supply voltage
2.0
5.0
6.0
4.5
5.0
5.5
V
VI
input voltage
0
-
VCC
0
-
VCC
V
VO
output voltage
0
-
VCC
0
-
VCC
V
Tamb
ambient temperature
40
+25
+125
40
+25
+125
C
t/V
input transition rise and fall rate
VCC = 2.0 V
-
-
625
-
-
-
ns/V
VCC = 4.5 V
-
1.67
139
-
1.67
139
ns/V
VCC = 6.0 V
-
-
83
-
-
-
ns/V
9. Static characteristics
Table 6.
Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
25 C
Conditions
40 C to +85 C 40 C to +125 C Unit
Min
Typ
Max
Min
Max
Min
Max
VCC = 2.0 V
1.5
1.2
-
1.5
-
1.5
-
V
VCC = 4.5 V
3.15
2.4
-
3.15
-
3.15
-
V
VCC = 6.0 V
4.2
3.2
-
4.2
-
4.2
-
V
VCC = 2.0 V
-
0.8
0.5
-
0.5
-
0.5
V
VCC = 4.5 V
-
2.1
1.35
-
1.35
-
1.35
V
VCC = 6.0 V
-
2.8
1.8
-
1.8
-
1.8
V
IO = 20 A; VCC = 2.0 V
1.9
2.0
-
1.9
-
1.9
-
V
IO = 20 A; VCC = 4.5 V
4.4
4.5
-
4.4
-
4.4
-
V
IO = 20 A; VCC = 6.0 V
5.9
6.0
-
5.9
-
5.9
-
V
IO = 4.0 mA; VCC = 4.5 V
3.98
4.32
-
3.84
-
3.7
-
V
IO = 5.2 mA; VCC = 6.0 V
5.48
5.81
-
5.34
-
5.2
-
V
74HC153-Q100
VIH
VIL
VOH
HIGH-level
input voltage
LOW-level
input voltage
HIGH-level
output voltage
74HC_HCT153_Q100
Product data sheet
VI = VIH or VIL
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
5 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
Table 6.
Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
VOL
LOW-level
output voltage
25 C
Conditions
40 C to +85 C 40 C to +125 C Unit
Min
Typ
Max
Min
Max
Min
Max
IO = 20 A; VCC = 2.0 V
-
0
0.1
-
0.1
-
0.1
V
IO = 20 A; VCC = 4.5 V
-
0
0.1
-
0.1
-
0.1
V
IO = 20 A; VCC = 6.0 V
-
0
0.1
-
0.1
-
0.1
V
IO = 4.0 mA; VCC = 4.5 V
-
0.15
0.26
-
0.33
-
0.4
V
IO = 5.2 mA; VCC = 6.0 V
-
0.16
0.26
-
0.33
-
0.4
V
VI = VIH or VIL
II
input leakage
current
VI = VCC or GND;
VCC = 6.0 V
-
-
0.1
-
1
-
1
A
ICC
supply current
VI = VCC or GND; IO = 0 A;
VCC = 6.0 V
-
-
8.0
-
80
-
160
A
CI
input
capacitance
-
3.5
-
-
-
-
-
pF
74HCT153-Q100
VIH
HIGH-level
input voltage
VCC = 4.5 V to 5.5 V
2.0
1.6
-
2.0
-
2.0
-
V
VIL
LOW-level
input voltage
VCC = 4.5 V to 5.5 V
-
1.2
0.8
-
0.8
-
0.8
V
VOH
HIGH-level
output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = 20 A
4.4
4.5
-
4.4
-
4.4
-
V
IO = 4.0 mA
3.98
4.32
-
3.84
-
3.7
-
V
IO = 20 A; VCC = 4.5 V
-
0
0.1
-
0.1
-
0.1
V
IO = 5.2 mA; VCC = 6.0 V
-
0.15
0.26
-
0.33
-
0.4
V
VOL
LOW-level
output voltage
VI = VIH or VIL; VCC = 4.5 V
II
input leakage
current
VI = VCC or GND;
VCC = 5.5 V
-
-
0.1
-
1
-
1
A
ICC
supply current
VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
-
-
8
-
80
-
160
A
ICC
additional
supply current
per input pin;
VI = VCC  2.1 V; IO = 0 A;
other inputs at VCC or GND;
VCC = 4.5 V to 5.5 V
-
45
162
-
203
-
221
A
1In, 2In
CI
input
capacitance
74HC_HCT153_Q100
Product data sheet
nE
-
60
216
-
270
-
294
A
Sn
-
135
486
-
608
-
662
A
-
3.5
-
-
-
-
-
pF
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
6 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
10. Dynamic characteristics
Table 7.
Dynamic characteristics
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit, see Figure 8; unless otherwise specified
Symbol Parameter
25 C
Conditions
Min
40 C to +85 C
Typ Max
Min
Max
40 C to +125 C Unit
Min
Max
74HC153-Q100
tpd
propagation
delay
1In to nY, 2In to nY; see
Figure 6
[1]
VCC = 2.0 V
-
47
145
-
180
-
220
ns
VCC = 4.5 V
-
17
29
-
36
-
44
ns
VCC = 5.0 V; CL = 15 pF
-
14
-
-
-
-
-
ns
VCC = 6.0 V
-
14
25
-
31
-
38
ns
VCC = 2.0 V
-
50
150
-
190
-
225
ns
VCC = 4.5 V
-
18
30
-
38
-
45
ns
VCC = 5.0 V; CL = 15 pF
-
15
-
-
-
-
-
ns
VCC = 6.0 V
-
14
26
-
33
-
38
ns
VCC = 2.0 V
-
33
100
-
125
-
150
ns
VCC = 4.5 V
-
12
20
-
25
-
30
ns
Sn to nY; see Figure 7
nE to nY; see Figure 7
tt
CPD
transition time
power
dissipation
capacitance
VCC = 5.0 V; CL = 15 pF
-
10
-
-
-
-
-
ns
VCC = 6.0 V
-
10
17
-
21
-
26
ns
VCC = 2.0 V
-
19
75
-
95
-
110
ns
VCC = 4.5 V
-
7
15
-
19
-
22
ns
VCC = 6.0 V
-
6
13
-
16
-
19
ns
-
30
-
-
-
-
-
pF
VCC = 4.5 V
-
19
34
-
43
-
51
ns
VCC = 5.0 V; CL = 15 pF
-
16
-
-
-
-
-
ns
VCC = 4.5 V
-
13
24
-
30
-
36
ns
VCC = 5.0 V; CL = 15 pF
-
16
-
-
-
-
-
ns
[2]
see Figure 6
per package;
VI = GND to VCC
[3]
1In to nY, 2In to nY; see
Figure 6
[1]
74HCT153-Q100
tPHL
tPLH
HIGH to LOW
propagation
delay
LOW to HIGH
propagation
delay
74HC_HCT153_Q100
Product data sheet
1In to nY, 2In to nY; see
Figure 6
[1]
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
7 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
Table 7.
Dynamic characteristics …continued
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit, see Figure 8; unless otherwise specified
Symbol Parameter
25 C
Conditions
Min
tpd
propagation
delay
Sn to nY; see Figure 7
VCC = 4.5 V
power
dissipation
capacitance
[1]
Max
Min
Max
20
34
-
43
-
51
ns
-
17
-
-
-
-
-
ns
VCC = 4.5 V
-
14
27
-
34
-
41
ns
VCC = 5.0 V; CL = 15 pF
-
11
-
-
-
-
-
ns
-
7
15
-
19
-
22
ns
-
30
-
-
-
-
-
pF
[1]
[2]
see Figure 6
VCC = 4.5 V
CPD
Min
-
nE to nY; see Figure 7
transition time
Typ Max
40 C to +125 C Unit
[1]
VCC = 5.0 V; CL = 15 pF
tt
40 C to +85 C
[3]
per package;
VI = GND to VCC  1.5 V
tpd is the same as tPHL and tPLH.
[2]
tt is the same as tTHL and tTLH.
[3]
CPD is used to determine the dynamic power dissipation (PD in W):
PD = CPD  VCC2  fi  N +  (CL  VCC2  fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
 (CL  VCC2  fo) = sum of outputs.
9,
90
,QOQLQSXW
90
*1'
W3+/
92+
W3/+
9<
90
Q<RXWSXW
90
9;
92/
W7+/
W7/+
DDD
(1) Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 6.
Table 8.
Waveforms showing the input (1In, 2In) to output (1Y, 2Y) propagation delays and output transition times
Measurement points
Type
Input
Output
VM
VM
VX
VY
74HC153-Q100
0.5VCC
0.5VCC
0.1VCC
0.9VCC
74HCT153-Q100
1.3 V
1.3 V
0.1VCC
0.9VCC
74HC_HCT153_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
8 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
9,
90
6QQ(LQSXW
90
*1'
W3+/
92+
W3/+
9<
90
Q<RXWSXW
90
9;
92/
W7+/
W7/+
DDD
(1) Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 7.
Waveforms showing the input (Sn, nE) to output (nY) propagation delays
9,
QHJDWLYH
SXOVH
W:
90
*1'
9,
WI
WU
WU
WI
SRVLWLYH
SXOVH
*1'
90
90
90
W:
9&&
*
9,
92
'87
57
&/
DDK
Test data is given in Table 9.
Definitions test circuit:
RT = termination resistance should be equal to output impedance Zo of the pulse generator.
CL = load capacitance including jig and probe capacitance.
Fig 8.
Table 9.
Test circuit for measuring switching times
Test data
Type
Input
VI
tr, tf
CL
74HC153-Q100
VCC
6.0 ns
15 pF, 50 pF
tPLH, tPHL
74HCT153-Q100
3.0 V
6.0 ns
15 pF, 50 pF
tPLH, tPHL
74HC_HCT153_Q100
Product data sheet
Load
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
Test
© NXP B.V. 2014. All rights reserved.
9 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
11. Package outline
62SODVWLFVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP
627
'
(
$
;
F
\
+(
Y 0 $
=
4
$
$
$
$
SLQLQGH[
ș
/S
/
H
Z 0
ES
GHWDLO;
PP
VFDOH
',0(16,216LQFKGLPHQVLRQVDUHGHULYHGIURPWKHRULJLQDOPPGLPHQVLRQV
81,7
$
PD[
$
$
$
ES
F
'
(
H
+(
/
/S
4
Y
Z
\
=
PP
LQFKHV ș
R
R
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPLQFKPD[LPXPSHUVLGHDUHQRWLQFOXGHG
Fig 9.
5()(5(1&(6
287/,1(
9(56,21
,(&
-('(&
627
(
06
-(,7$
(8523($1
352-(&7,21
,668('$7(
Package outline SOT109-1 (SO16)
74HC_HCT153_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
10 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP
'
627
(
$
;
F
\
+(
Y 0 $
=
4
$
SLQLQGH[
$
$
$
ș
/S
/
H
GHWDLO;
Z 0
ES
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
81,7
$
PD[
$
$
$
ES
F
'
(
H
+(
/
/S
4
Y
Z
\
=
ș
PP
R
R
1RWHV
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
3ODVWLFLQWHUOHDGSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
287/,1(
9(56,21
627
5()(5(1&(6
,(&
-('(&
-(,7$
(8523($1
352-(&7,21
,668('$7(
02
Fig 10. Package outline SOT403-1 (TSSOP16)
74HC_HCT153_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
11 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
12. Abbreviations
Table 10.
Abbreviations
Acronym
Description
DUT
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
MM
Machine Model
MIL
Military
13. Revision history
Table 11.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
74HC_HCT153_Q100 v.3
20140123
Product data sheet
-
74HC_HCT153_Q100 v.2
Modifications:
•
Table 1 and Section 11: all references to 14 pin packages removed.
74HC_HCT153_Q100 v.2
20131128
Product data sheet
-
74HC_HCT153_Q100 v.1
74HC_HCT153_Q100 v.1
20130722
Product data sheet
-
-
74HC_HCT153_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
12 of 15
74HC153-Q100; 74HCT153-Q100
NXP Semiconductors
Dual 4-input multiplexer
14. Legal information
14.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
14.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
14.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
74HC_HCT153_Q100
Product data sheet
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
13 of 15
NXP Semiconductors
74HC153-Q100; 74HCT153-Q100
Dual 4-input multiplexer
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
14.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
15. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
74HC_HCT153_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 23 January 2014
© NXP B.V. 2014. All rights reserved.
14 of 15
NXP Semiconductors
74HC153-Q100; 74HCT153-Q100
Dual 4-input multiplexer
16. Contents
1
2
3
4
5
5.1
5.2
6
7
8
9
10
11
12
13
14
14.1
14.2
14.3
14.4
15
16
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 3
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
Functional description . . . . . . . . . . . . . . . . . . . 4
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Recommended operating conditions. . . . . . . . 5
Static characteristics. . . . . . . . . . . . . . . . . . . . . 5
Dynamic characteristics . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12
Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Contact information. . . . . . . . . . . . . . . . . . . . . 14
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2014.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 23 January 2014
Document identifier: 74HC_HCT153_Q100