Industrial PROFET™ Family – Protected High-Side Switches for Industrial Applications

Product Brief
The Industrial PROFET™ Family – Protected
High-Side Switches for Industrial Applications
The Industrial PROFET™ family is a family of protected single channel Smart High-Side
NMOS-Power Switches with charge pump and CMOS compatible input. The devices
are monolithically integrated in Smart technology.
Applications
„„ Microcontroller-compatible power switch for 12V/24V
and 42V DC applications
„„ High-speed PWM applications
„„ Qualified for 12V and 24V applications
„„ All types of resistive, inductive and capacitive loads
„„ Replacement of electromechanical relays,
fuses and discrete circuits
„„ Driver for electromagnetic relays
„„ Power management for high-side-switching with
low current consumption in OFF-mode x
Key Benefits
„„ Benchmark energy robustness
„„ Especially suitable for switching inductive loads
„„ High voltage capability (up to 58V)
„„ Fast switching capability (up to 1kHz)
„„ Low current consumption
„„ CMOS compatible input
„„ Protection features: overtemperature, short circuit,
overload, current limitation, open load detection
www.infineon.com
Key Features
„„ Protection functions: short-circuit
protection, overload protection,
overtemperature protection, underand overvoltage shutdown, loss-ofground and loss-of-Vbb protection,
reverse battery protection, ESD
protection
„„ Available with diagnosis functions
„„ Wide operating voltage range
up to 58V
„„ CMOS-compatible input
„„ PWM capability
„„ Improved Electromagnetic
Compatibility (EMV)
„„ Very low standby current
„„ Green/RoHS compliant
Product Brief
The Industrial PROFET™ Family – Protected
High-Side Switches for Industrial Applications
Block Diagram
ITS4200S-SJ-D
Wire
Harness
VS 5
6
Bias
Supervision
Overvoltage
Protection
Current
Limiter
7
8
Control
Interface
2 IN
Gate
Control
Circuit
Logic
ESD
Protection
Wire
Harness
OUT 3
4 ST
GND3
CS
220nF
Temperature
Sensor
COUT
1nF
GND
1
Complex
Load
GND1
GND2
Product Table
Product
RDS(on) @
Tj = 25°C
[mΩ]
Load
Current
(min.)
[A]
[A]
[mJ]
Recommended
Operating
Voltage Range
[V]
ITS41K0S-ME-N
1000
0.2
0.55
0.9
1000 @ 0.15A
4.9 … 60.0
N/A
SOT223
ITS4200S-ME-O
150
0.7
1.1
1.4
700 @ 0.5A
12.0 … 45.0
N/A
SOT223
ITS4200S-ME-P
150
1.4
2.2
3.0
160 @ 1A
12.0 … 45.0
N/A
SOT223
ITS4200S-ME-N
160
0.7
1.2
1.5
500 @ 0.5A
5.0 … 34.0
N/A
SOT223
ITS4060S-SJ-N
50
2.6
3.1
17.0
900 @ 1.5A
5.0 … 34.0
N/A
PG-DSO-8
ITS4100S-SJ-N
70
2.0
2.4
10.0
870 @ 1A
5.0 … 34.0
N/A
PG-DSO-8
ITS4200S-SJ-D
150
1.3
1.7
6.5
125 @ 1A
6.0 … 52.0
Digital
PG-DSO-8
ITS4300S-SJ-D
250
0.4
0.8
1.2
800 @ 300mA
5.0 … 34.0
Digital
PG-DSO-8
ITS42008-SB-D
200
0.7
0.7
1.1
10 @ 0.625A
11.0 ... 45.0
Digital
PG-DSO-36
Published by
Infineon Technologies AG
85579 Neubiberg, Germany
© 2013 Infineon Technologies AG.
All Rights Reserved.
Visit us:
www.infineon.com
Order Number: B124-H9739-G1-X-7600
Date: 12 / 2013
Load
Current
(typ.)
[A]
IL(SC) (typ.)
EAS
Attention please!
The information given in this document shall in no event
be regarded as a guarantee of conditions or characteristics
(“Beschaffenheitsgarantie”). With respect to any examples
or hints given herein, any typical values stated herein and/
or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation
warranties of non-infringement of intellectual property
rights of any third party.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Office (www.infineon.com).
Diagnosis
Package
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only
be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause
the failure of that life-support device or system, or to affect
the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted
in the human body, or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons
may be endangered.