P Ideas for Wireless Solutions Bluetooth 2.1 HCI Module PAN1325 OUTLINES - ENW8918A2JF M ODULES Panasonic Electronic Devices Europe GmbH IRELESS W Panasonic’s new PAN1325 Host Controlled Interface (HCI) Bluetooth RF module brings Texas Instrument’s seventh generation Bluetooth core integrated circuit, the CC2560, to an easy to use module format. Panasonic’s tiny footprint technology has produced a module of only 85.5mm². The module is designed to accommodate PCBs pad pitch of 1.3mm and as little as two layers for easy implementation and manufacturing. This module has been designed to be 100% pin compatible with the next generation of Bluetooth Dual Mode Low Energy devices. This unique design feature enables designers to seamlessly transition between Bluetooth Classic and Low Energy modules. The PAN1325 makes connectivity between mobile devices such as cellular phones and small button cell battery powered devices like fitness sensors, watches, healthcare, entertainment and mobile accessories easily implemented, creating a seamless data chain from sensors to the web. More than 250m (line of side) with 6dBm Tx power could be reached with the PAN1325ETU platform. FEATURES General • Best-in-class Bluetooth RF performance (Tx, Rx sensitivity, blocking) • Fully Qualified Bluetooth v2.1 EDR, FCC and IC listed, CE complied • Dimensions: 9.0 mm x 9.5 mm x 1.8 mm (width x length x height) • Operating Temperature Range: -20ºC to +70ºC • Supply Voltage Range: 1.7 - 4.8 V • Based upon TI’s CC2560 • Profiles: SPP, HDP, Audio and others (Integrates with TI’s ultra low-power MSP430 microprocessor) • Very fast algorithm for both ACL and eSCO • Supports Extended Range Tx power with 10.5dBm typical output • Low power scan method and inquiry scans at 1/3rd normal power Interfaces - 3.25 MBaud UART with transport layer detection (HCI UART, HCI Three and Four Wire UART) - PCM/I2S interface for digital audio - WLAN coexistence interface - General purpose I/Os with interrupt capabilities. Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1325 BT2.1 Rev. A2 www.pedeu.panasonic.de [email protected] Hardware Status: Mass Production P CONTACT Dipl.-Ing. Mathias Hopp Product Manager Wireless Connectivity Panasonic Electronic Devices Europe GmbH Zeppelinstrasse 19 21337 Lüneburg, Germany Tel. +49-4131-899-283 Fax +49-4131-899-187 [email protected] APPLICATIONS All Wireless Applications - Medical Applications - Printers - Access Points - Wireless Sensors - Industrial Applications - Cable Replacement Personal Digital Assistants (PDAs) PC Motherboards & - Peripherals Scanners Mono & Stereo Audio Applications BLOCK DIAGRAM EEPROM (optional ) Vsupply Audio PCM / I2S UART Slow Clock 32.768 kHz CC2560 BT-HCI from TI Crystal 26 MHz Filter PAN1325 TECHNICAL CHARACTERISTICS Parameter Value Condition / Note Receiver Sensitivity (BER=10 ) -93 dBm ideal wanted signal Output Power 10.5 dBm typ. max. 4 dBm for BT Class2 Power Supply 1,7 - 4,8 V Battery or DC/DC Ultra Low Power Scan 135 µA 1.28s Interval eSCO Link 2-EV3 8.3 mA Enhanced Data Rate, 544.0 kb/s (1) EDR 3-DH1\3-DH5 39.2 mA Enhanced Data Rate, 544.0 kb/s (1) Operating Temperature Range -20°C to +70°C -40°C to +85°C with EEPROM -3 (1) Figure indicates maximum possible data rate with this packet type www.pedeu.panasonic.de [email protected] Hardware Status: Mass Production