TECHNICAL CHARACTERISTICS 3 SPECIFICATION >Rating: 50mA, 12VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 1OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 250VAC for 1 minute >Bounce: 10ms max. 2,7 0,7 1 4 2 3 1 MATERIAL >Cover: Stainless Steel >Stem: PA46, UL HB >Frame: PA46, UL HB, color White >Contact: Stainless Steel with silver >Terminal: Copper alloy with silver plating >Tape: Polyimide tape 0,6 1,7 4 2 4,0 6,0 P.C.B. MOUNTING PLAN 3,7 1,4 1,65 1,0 3 4 SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3 sec. max 1 ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach 2 5,5 ±0,2 PACKAGING INFORMATION >Tape & Reel SCHEMATIC PN Force 434 353 045 816 434 333 045 822 White Black 200.000 100.000 Stroke 0,25 mm ± 0,1 0,30 mm +0,1 / -0,2 3,5 4,5 ±0,2 4,7 Color of Stem Life cycle 160g ± 50gf 220g ± 50gf 2,6 Scale - 5:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Projection Date e d Drawn 10-07-14 remove Contact cladding 14-10-30 DaF Checked 10-07-14 revised MatchCode 14-07-24 AL c Bounce 10ms max. In addition, even electronic component in general electronic equipments, b description when used in electrical circuits that require high safety, reliability functions a warning text or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. REV FILE 14-04-11 DaF 12-06-06 WJ 11-10-28 WJ DATE BY WE eiCan CAD Basic material Name Jelisarow Hsu DESCRIPTION WS-TASU 4,7x3,5 mm side push tact switch, J-Bend SMD version 5:1 Würth Elektronik Scale eiCan Drawing.- No. EDV NO 4343x30458xx.dft Position 4343x30458xx SIZE A4 System :Solid Edge V20