previous version

Document 752NR-1
Coupled Inductors – LPR6235
le.
availab
ns.
n now for new desig ee
io
s
r
e
v
d
fr
e
d
n
d
e
e
n
v
g
e
Impro
nd halo
recomm
.
re not
d free a and function
par ts a d by new lea
t
These
form, fi
e
c
in
la
l
p
ntica
5.cfm.
re re
They a which are ide ft.com/lpr623
s
ra
version ee www.coilc
S
For Step-Up, Resonant
& Flyback Applications
• Can be used as step-up or flyback transformers in DC-DC
converters or as autotransformers
• Perfect for low voltage step-up in energy harvesting applications
• Selected by Linear Technology for the LTC3108 and LTC3109
Ultralow Voltage Step-Up Converter and Power Managers
These shielded parts are only 3.5 mm high and 6 mm
square. The excellent coupling coefficient (k = 0.95)
makes them ideal for use in a variety of applications.
They can be used as flyback transformers and step-up
pulse transformers.
The high Isat and low DCR ratings of these parts provide
high efficiency and excellent current handling in a rugged, low cost design.
Primary (L1) DCR max SRF
(Ohms)
inductance2
typ3 Isat4
Part Turns
number1
ratio ±20% (µH) L1 L2 (kHz)(A)
LPR6235-253LML_1 : 10
LPR6235-253PML_1 : 20
LPR6235-123QML_1 : 50
LPR6235-752RML_1 : 90
LPR6235-752SML_1 : 100
25
25
12.5
7.5
7.5
C
D
VIN
D
0.74 13.713001.3
0.20 72 5800.7
0.085200
360 0.9
0.085285
257 1.6
0.085316
230 1.6
C
L1
VOUT
Sync
Rectifier
L2
C
1. When ordering, please specify packaging code:
LPR6235-253PMLC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape
(350 parts per full reel).
B=Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use code
letter D instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (1500 parts per full
reel).
2. Inductance is measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP
4284A LCR meter or equivalent.
3. SRF measured using an Agilent/HP 4191A or equivalent.
4. DC current applied to L1, at which the inductance drops 10% from its value
without current.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Typical Step-Up Converter
+
+
D
L1
VIN
L2
C
C
VOUT
–
PWM
–
Typical Flyback Converter
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 752NR-1 Revised 10/22/13
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 752NR-2
Step-Up / Flyback Transformers – LPR6235
Dot indicates pin 1
1
0.236 ±0.003
6,00 ±0,08
XXXX
4
L1
L2
3
2
Dash
number
0.138
max
3,50
0.236 ±0.003
6,00 ±0,08
Recommended
Land Pattern
1
3
2
0.167 0.079
4,25 2,00
4
1
inches
mm
45°
typ
0.260
6,60
3
2
0.060
1,52
Dimensions are in
4
0.047
1,2
Core material Ferrite
Weight 460 – 480 mg
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Winding to winding isolation 300 Vrms
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Failures in Time (FIT) 38 per one billion hours
Packaging 350/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.68 mm pocket depth
Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
0.079
2,00
0.167
4,25
0.260
6,60
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 752NR-2 Revised 10/22/13
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.