7004

Features
■ Expands to add POTS lines, DSL or both
■ Manufactured from high-impact resistant, ultraviolet desensitized, flame retardant
plastic
■ Sealed switching jacks available with optional Insulation Displacement Connectors (IDC)
■ Made in USA, RUS approved
■ Convenient ground attachment and wiring ports
■
Listed per UL 497 (File: E53117)
7004 Series - Network Interface Device
Bourns® Model 7004 NID provides a secure and weather-resistant enclosure for Telco service for residential or commercial
installations. The Model 7004 supplies station protection and test access points and can be configured for a maximum of four
POTS lines or three lines with DSL. The Model 7004 features convenient cable knockouts and generous working space for wire
management.
How to Order
7004 - 0X - X X - XX - XX
Model Number Designator
Number of Twisted Pairs
1 = One
3 = Three
2 = Two
4 = Four
Station Protector Options
D1
U3
Z1
W3
V3
Q3
= 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL, cUL)
= 455HS-MSP (2377-45-HS-IDC) Voice/DSL/Data (UL, cUL)
= 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL)
= 455HS-BC* (2377-45-BC-IDC) Balance-Sensitive DSL (UL, cUL)
= 455-MSP-TBU (2377-45-HS-TBU) MSP w/TBU® Protector (UL, cUL)
= 455BC-MSP-TBU* (2377-45-BC-TBU) Balance-Sensitive MSP
w/TBU® Protector (UL, cUL)
E2 = 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL)
Y2 = 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL)
G = 155G (2378-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL)
K = 356G (2377-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL)
R3 = 356G (2377-35-G-IDC) Balanced GDT, No Back-Up-Gap (UL, cUL)
T = Tii355M
O = No Station Protectors (Not available with DSL configurations)
*For DSL systems requiring capacitive balance within 1 pF.
Note 1 = Digi.Guard - 356 size, RUS Maximum Duty.
Note 2 = Digi.Guard II - 125 size, RUS Heavy Duty.
Note 3 = Insulation Displacement Connectors (IDC)
Special Options
H = Security Screw in security plate
S = Sealed Switching Jack w/IDC (85122-T-IDC)
F = Sealed Switching Jack 4-Post (85122-T4)
B = Expansion Bridge w/Binding Posts (85122-B)
POTS Splitter Options †
P1 = (1) 3610A2 ADSL 2+ POTS Splitter, UL Listed
P2 = (2) 3610A2 ADSL 2+ POTS Splitters, UL Listed
V1 = (1) 3610V2 VDSL 2 POTS Splitter, UL Listed
V2 = (2) 3610V2 VDSL 2 POTS Splitters, UL Listed
I = Expansion Bridge w/IDC (85122-IDC)
5 = Five Slots for 85122-x Bridges
O = No options (standard 85122 jack, 4 slots)
P1-I = (1) 3610A2-IDC ADSL2+ POTS Splitter w/IDC, UL Listed
P2-I = (2) 3610A2-IDC ADSL2+ POTS Splitters w/IDC, UL Listed
V1-I = (1) 3610V2-IDC VDSL2 POTS Splitter w/IDC, UL Listed
V2-I = (2) 3610V2-IDC VDSL2 POTS Splitters w/IDC, UL Listed
W1-I = (1) 3622V2-IDC VDSL2 POTS Splitters w/IDC, Subscriber Side, RJ11,
UL Listed
W2-I = (2) 3622V2-IDC VDSL2 POTS Splitters w/IDC, Subscriber Side, RJ11,
UL Listed
W3-I = (3) 3622V2-IDC VDSL2 POTS Splitters w/IDC, Subscriber Side, RJ11,
UL Listed
†
DSL Configuration Note:
The POTS Splitter options must be ordered with option D, Z, E or Y Station Protectors.
7004 NIDs ordered with DSL units must be ordered with Special Option F (4-post sealed switching jack)
or Special Option S (sealed switching jack w/IDC). Example: 7004-01-DF-P1
DSL Adapter Options
B1 = (1) 3670-01 BalUn Module
To add lines, use station protector +
85122
Standard Jack (Not available with DSL configurations)
85122-T4
Sealed Switching Jack, 4-post
85122-T-IDC Sealed Switching Jack w/IDC
Also available:
80534 Conduit Adapter
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
7004 Series - Network Interface Device
Installation Diagrams
POTS SPLITTER
(ON TOP)
MOUNTING POST
STATION
PROTECTOR
PROTECTOR
(ON BOTTOM)
85122-T4
POTS MODULE
MOUNTING
POST
PROTECTOR
POTS
SPLITTER
DATA
IN1/2
OUT
MOUNTING
POST
BEFORE
85122-T (SUPPLIED)
DATA MODULE
FINISHED
Product Dimensions
High
Wide
Deep
191
(7.5)
196
(7.7)
69
(2.7)
CUSTOMER SIDE
LOCKED TELCO SIDE
DIMENSIONS:
FROM C.O.
MM
(INCHES)
CAT 5
TO PHONE
TO DSL MODEM
RJ11 Subscriber Bridges
85122
Standard Loop
4 Slot - Standard
5 Slot - Option 5
85122-T4*
Internal Switch - 4 Lugs
85122-T-IDC*
Sealed Switch Jack w/IDC
*Includes environmental sealant and closed-cell foam gasket.
Expansion Bridges
85122-IDC
Insulation Displacement
Connectors
TR
TR
1
2
TR
TR
3
4
REV. L 04/15
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
85122-B
Binding Post
Similar pages