Rev. 6/12 6.0 TO 18.0 GHz COUGAR MIXERPAK DOUBLE-BALANCED MIXER MMP18644 MMP18644 Typical Values LO & RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Third Order I.P.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conversion Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LO Drive (nominal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . High Isolation (LO to RF) . . . . . . . . . . . . . . . . . . . . . . . Cougar MixerPak - Seam Sealed Hermetic Package MMP18644 6.0 - 18.0 GHz DC - 4.0 GHz +12.0 dBm 5.0 dB +16.0 dBm 50.0 dB Cougar MixerPak SPECIFICATIONS* Parameter SSB Conversion Loss and SSB Noise Figure Port fR fL fI fR fL fI fR fL fI fI Frequency (GHz) 8.0 to 11.0 8.0 to 11.0 DC to 1.0 6.0 to 16.0 6.0 to 16.0 DC to 1.0 6.0 to 18.0 6.0 to 18.0 DC to 1.0 DC to 4.0 Typ. (dB) Guaranteed -55 to +85 °C Max. (dB) 4.5 4.5 4.5 5.0 5.0 5.0 6.0 6.0 6.0 8.0 5.5 5.5 5.5 7.0 7.0 7.0 8.0 8.0 8.0 9.0 DIMENSIONS ARE IN INCHES [MILLIMETERS] Conversion Comp. Desenitization fR fR2 Level = 7 dBm Level = 5 dBm – – 1.0 1.0 Harmonic Intermodulation Products (single tone) Typ. (dB) Min. (dB) Isolation fL at R fL at I fR at I fL fL fR 6.0 to 10.0 6.0 to 10.0 6.0 to 10.0 38 15 30 32 10 12 fL at R fL at I fR at I fL fL fR 10.0 to 18.0 10.0 to 18.0 10.0 to 18.0 50 22 40 40 15 25 LO = +16 dBm +20 dBm Third Order Intercept H ARMONICS OF f R 5 4 3 2 1 92 88 86 91 98 99 71 66 13 12 85 93 96 95 83 81 37 32 0 0 -17 -17 0 1 0 >100 98 96 94 74 75 50 50 28 29 20 23 91 >100 74 65 58 54 35 30 41 45 33 37 90 87 82 85 74 68 72 74 72 69 44 48 2 3 4 HARMONICS OF f L F R = 6000 MHz @ -10 dBm F L = 6030 MHz F L @ +16 dBm F L @ +19 dBm 87 85 74 64 77 83 72 71 62 60 29 31 5 — Harmonic Intermodulation Products (single tone) * Measured in a 50-ohm system with nominal LO drive of +16 dBm as a downconverter. ABSOLUTE MAXIMUM RATINGS Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +150 °C Peak RF Input Power All Ports . . . . . . . . . . . . . . . . . . . +22 dBm @ 25 °C derate to +17 dBm @ 100 °C HARMONICS OF f R 5 4 3 2 1 88 87 87 87 98 97 80 78 14 14 96 86 91 97 97 93 50 46 0 0 -22 -19 0 1 0 >100 97 >100 95 78 77 70 65 28 28 38 42 >100 95 96 83 66 63 54 47 47 47 35 36 >100 98 97 89 78 73 86 79 57 57 59 64 2 3 4 HARMONICS OF f L F R = 8000 MHz @ -10 dBm F L = 8030 MHz F L @ +16 dBm F L @ +19 dBm 650-691-9800 • Fax: 650-962-6845 • Updates: www.teledynemicrowave.com • [email protected] >100 >100 93 83 91 86 81 81 44 46 34 40 5 MMP18644 F L at +16 dBm 20 10 6 8 9 10 11 12 13 FREQUENCY - GH z 14 15 16 17 18 Isolation (L to R) vs Frequency1 70 ISOLATION - dB 7 F L at +16 dBm 60 50 40 30 7 8 9 10 11 12 13 FREQUENCY - GH z 14 15 16 17 Isolation (R to I) vs Frequency 60 ISOLATION - dB F L = 12.0 GHz @ +16 dBm 50 40 30 20 10 6 7 8 9 10 11 12 13 FREQUENCY - GH z 14 15 16 17 Conversion Loss vs LO Drive Level 18 3 -4 F L = 12.03 GHz, Low-Side LO F I = 30 MH z -8 -12 -16 The minimum recommended drive level is +10 dBm. The maximum recommended drive level is +22 dBm. 5 6 7 8 9 10 11 12 13 LO DRIVE - dBm 14 16 18 20 17 18 17 18 Conversion Loss vs RF Frequency 3 -3 -4 -5 F L at +16 dBm -6 -7 6 7 8 9 18 CONVERSION LOSS - dB 6 CONVERSION LOSS - dB Isolation (L to I) vs Frequency1 30 CONVERSION LOSS - dB ISOLATION - dB TYPICAL PERFORMANCE 10 11 12 13 14 FREQUENCY - GHz 15 16 Conversion Loss vs RF Frequency 3 -3 -4 -5 F L at +19 dBm -6 -7 6 7 8 9 10 11 12 13 14 FREQUENCY - GHz 15 16 3Conversion loss of the mixer when used in an SSB system. The frequency ordinate refers to the R-port (fR) with fI at 30 MHz. 1Level of the f signal fed through to the R- and I-ports with respect to the level of the f signal L L at the L-port. F L at +16 dBm 5 VSW R INPUT POWER - dBm 6 Power Input at 1 dB Compression 12 L-Port VSWR vs Frequency 2 4 3 2 IF = 30 MHz, Hi-Side LO 10 +16 dBm LO +19 dBm LO 8 6 4 2 6 6 7 8 9 10 11 12 13 FREQUENCY - GH z 14 15 16 17 18 R-Port VSWR vs Frequency 2 6 VSW R 5 F L = 12.0 GHz at +16 dBm 4 3 2 R ELATIVE IF RESPONSE - dB 1 1 1.75 7 8 9 10 11 12 13 FREQUENCY - GHz 14 15 16 17 I-Port VSWR vs Frequency 2 VSW R F L = 12.0 GHz at +16 dBm 1.5 1.25 1.0 0.01 0.5 1.0 2.0 FREQUENCY - GHz 3.0 4.0 9 10 11 12 13 14 FREQUENCY - GHz 15 16 17 18 F L = 12.0 GHz, Low-Side LO 0 -1 +16 dBm LO +19 dBm LO -2 -3 0.001 1.0 2.0 IF FREQUENCY - GHz 3.0 4.0 Intercept Point I F = 30 MH z RF= -10 dBm Low-Side LO 60 IP2 50 40 +16 dBm LO +19 dBm LO 30 IP3 20 10 6 2 VSWR of the I- and R-ports in a 50-ohm system. Some variation in the R-port VSWR will occur 8 Relative IF Response 1 70 18 INTERCEPT POINT - dBm 6 7 7 8 9 10 11 12 13 14 FREQUENCY - GHz 15 as a function of the L-port frequency as shown above. 650-691-9800 • Fax: 650-962-6845 • Updates: www.teledynemicrowave.com • [email protected] 16 17 18