Rev. 6/12 2.0 TO 20.0 GHz COUGAR MIXERPAK DOUBLE-BALANCED MIXER MMP20224 MMP20224 Typical Values LO & RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Third Order I.P.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conversion Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LO Drive (nominal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . High Isolation (LO to RF) . . . . . . . . . . . . . . . . . . . . . . . Cougar MixerPak - Seam Sealed Hermetic Package MMP20224 2.0 - 20.0 GHz DC - 1.0 GHz +20.0 dBm 6.0 dB +16.0 dBm 35.0 dB Cougar MixerPak SPECIFICATIONS* Parameter Port Frequency (GHz) Typ. (dB) Guaranteed -55 to +85 °C Max. (dB) SSB Conversion Loss and SSB Noise Figure fR fL fI fR fL fI fI 2.0 to 12.0 2.0 to 12.0 DC to 0.5 2.0 to 20.0 2.0 to 20.0 DC to 0.5 0.5 to 1.0 6.0 6.0 6.0 7.0 7.0 7.0 8.0 7.0 7.0 7.0 8.5 8.5 8.5 9.5 Conversion Comp. Desenitization fR fR2 Level = 10 dBm Level = 8 dBm – – 1.0 1.0 Typ. (dB) DIMENSIONS ARE IN INCHES [MILLIMETERS] Min. (dB) Harmonic Intermodulation Products (single tone) fL fL fR 2.0 to 10.0 2.0 to 20.0 2.0 to 4.0 40 25 25 30 18 18 fL at R fL at I fR at I fL fL fR 10.0 to 20.0 2.0 to 20.0 4.0 to 20.0 30 25 30 22 18 25 LO = +16 dBm +20 dBm 5 HARMONICS OF f R Isolation fL at R fL at I fR at I 4 3 2 1 >100 99 >100 99 77 69 72 60 16 16 0 Third Order Intercept — 0 >100 >100 95 84 64 61 49 43 0 0 -8 -4 99 >100 93 83 78 70 52 46 36 34 19 20 >100 96 86 76 53 49 54 59 21 22 13 15 97 97 81 70 70 61 69 61 46 41 35 38 88 87 91 77 66 65 60 54 40 51 27 29 2 3 4 HARMONICS OF f L F R = 2000 MHz @ -10 dBm F L = 1970 MHz F L @ +16 dBm F L @ +19 dBm * Measured in a 50-ohm system with nominal LO drive of +16 dBm as a downconverter. 1 5 Harmonic Intermodulation Products (single tone) Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +150 °C Peak RF Input Power All Ports . . . . . . . . . . . . . . . . . . . +22 dBm @ 25 °C derate to +17 dBm @ 100 °C 5 HARMONICS OF f R ABSOLUTE MAXIMUM RATINGS 4 3 2 1 >100 95 >100 96 76 77 79 80 25 29 0 0 96 95 88 91 71 68 51 50 0 0 -5 -3 >100 97 >100 >100 77 76 55 52 45 40 31 33 >100 >100 91 87 51 48 53 51 31 34 10 12 97 98 93 83 72 70 73 72 43 42 59 58 1 2 3 4 HARMONICS OF f L F R = 4000 MHz @ -10 dBm F L = 3970 MHz F L @ +16 dBm F L @ +19 dBm 650-691-9800 • Fax: 650-962-6845 • Updates: www.teledynemicrowave.com • [email protected] 89 80 90 88 73 72 52 53 47 52 20 25 5 MMP20224 TYPICAL PERFORMANCE ISOLATION - dB F L at +16 dBm 40 30 20 10 2 4 5 6 7 8 9 10 11 12 FREQUENCY - GHz 13 14 16 18 20 Isolation (L to R) vs Frequency1 ISOLATION - dB 60 F L at +16 dBm 50 40 30 20 2 5 6 7 8 9 10 11 12 FREQUENCY - GHz 13 14 16 18 20 Isolation (R to I) vs Frequency 50 ISOLATION - dB 4 F L = 12 GHz @ +16 dBm 40 30 20 CONVERSION LOSS - dB Isolation (L to I) vs Frequency1 50 CONVERSION LOSS - dB CONVERSION LOSS - dB 3 4 5 6 7 8 9 10 11 12 FREQUENCY - GHz 13 14 16 18 -7 -9 F L = 10.03 GHz, Hi-Side LO, F I = 30 MHz -11 The minimum recommended drive level is +7 dBm. The maximum recommended drive level is +22 dBm. -13 2 4 5 6 7 8 9 10 11 LO DRIVE - dBm 12 13 14 16 18 20 14 16 18 20 14 16 18 20 Conversion Loss vs RF Frequency3 -4 F L at +16 dBm -5 -6 -7 -8 2 4 5 6 7 8 9 10 11 12 FREQUENCY - GHz 13 Conversion Loss vs RF Frequency3 -4 F L at +19 dBm -5 -6 -7 -8 2 4 5 6 7 8 9 10 11 12 FREQUENCY - GHz 13 3Conversion loss of the mixer when used in an SSB system. The frequency ordinate refers to the R-port (fR) with fI at 30 MHz. 10 2 Conversion Loss vs LO Drive Level -5 20 1Level of the f signal fed through to the R- and I-ports with respect to the level of the f sigL L nal at the L-port. INPUT POWER - dBm 5.0 F L at +16 dBm VSWR 4.0 3.0 2.0 7 8 9 10 11 12 FREQUENCY - GHz 13 14 16 18 5 3 1 2 VSWR 4 4 5 6 7 8 9 10 11 12 FREQUENCY - GHz 13 14 16 18 20 8 6 F L = 12.0 GHz at +16 dBm 3 2 1 0.01 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY - GHz 0.8 0.9 2 VSWR of the I- and R-ports in a 50-ohm system. Some variation in the R-port VSWR will occur as a function of the L-port frequency as shown above. 2 1.0 4 5 6 7 8 9 10 11 12 FREQUENCY - GHz 13 14 16 18 20 Relative IF Response 0 +16 dBm LO +19 dBm LO -1 -2 F L = 12.0 GHz, Low-Side LO -3 -4 0.01 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY - GHz 0.8 0.9 1.0 Intercept Point 60 I-Port VSWR vs Frequency2 +16 dBm LO +19 dBm LO 10 20 RELATIVE IF RESPONSE- dB 6 INTERCEPT POINT - dBm 5 F L = 12.0 GHz at +7 dBm 7 VSWR 4 R-Port VSWR vs Frequency2 8 5 IF = 30 MHz, Hi-Side LO 12 4 1.0 2 Power Input at 1 dB Compression 14 L-Port VSWR vs Frequency2 50 IP2 40 +16 dBm LO +19 dBm LO 30 20 IP3 10 I F = 30 MHz 0 2 4 5 R F = –10 dBm Hi-Side LO 6 7 8 9 10 11 12 FREQUENCY - GHz 13 14 650-691-9800 • Fax: 650-962-6845 • Updates: www.teledynemicrowave.com • [email protected] 16 18 20