Valve Identifier Plastic Tags Soft Aluminum Tags Mark and identify the status of the valve and prevent accidental adjustment. Imprint to leave a lasting impression even if ink wears off. •0.015" Rigid Vinyl •2 1/2"H x 2"W with 3/8" metal grommet •Sold in Packs of 5 PIDT001 PIDT003 1 ID Tags | ID Tags & Pipe Markers 800.777.3300 | Panduit.com • 24-gauge (0.020") thick, double-sided soft aluminum laminate over tag board •3/16" plain or eyelet hole • Writing permanently debosses PIDT002 Plain Hole Part No. Eyelet Hole Part No. Size PIDT005 PIDT009 3/4" x 3" Pkg. of 25 PIDT006 PIDT010 1 3/8" x 3 1/8" Pkg. of 25 PIDT007 PIDT011 2" x 4" Pkg. of 25 PIDT008 PIDT012 3" x 5" Pkg. of 25 PIDT004 Std. Pkg. Qty. Stainless Steel and Brass Marker Plates and Tags • Provides permanent identification of pipes, conduit, valves, cables and equipment in harsh environments • Designed for use with Panduit’s Pan-Steel® Stainless Steel Cable Ties for fast installation at lowest installed cost • All marker plates/tags can be embossed or laser etched with Panduit Factory Custom Marking Service • Designated plates feature easy feed design with a raised slot to simplify cable tie installation and improve productivity • Temperature ranges: Stainless Steel Marker Plates, Tags, & Cable Ties: -112° to 1000°F Brass Tags: -112° to 302°F Custom Marking Parameters Part No. Material Color Max. 3/16" (4.77mm) Character Per Line Max. Lines of Text Size Thickness Used with Pan-Steel® Cable Ties MMP350W17-Q 304 Stainless Steel Natural 23 6 1.73"W x 3.5"L 0.015" MLT-S 25 MT350-C 304 Stainless Steel Natural 26 3 0.75"W x 3.5"L 0.010" MLT-S 100 Std. Pkg. Qty. MT350W17-Q 304 Stainless Steel Natural 26 6 1.70"W x 3.5"L 0.015" MLT-S 25 MT150D-Q 304 Stainless Steel Natural 5, 6, 5 3 1.5" dia. 0.035" MLT-S 25 MTB150D-Q Brass Brass 5, 6, 5 3 1.5" dia. 0.040" MLT-S 25 Metal Indenting Machine • Provides quick, easy, and permanent identification with Panduit’s Pan-Alum™ Marker Plates and Cable Ties and Pan-Steel® Stainless Steel Marker Plates, Tags, Cable Ties and Straps • Automatic table indexing advances material forward for convenience and improved productivity • New, improved design features aluminum base and durable construction • 3/16" character wheel No. MIM187 2 ID Tags & Pipe Markers | Pipe Markers Pipe Markers Marking and identification of contents in pipes Designed to meet or exceed and piping systems is important to safety ASME (ANSI) A13.1-2007 recommendations for size, and maintenance. Pipe markers are to visibly color and visibility. identify contents, flow directions and hazard classification, thus promoting CONTENTS OF THE PIPE COLOR a safe working environment. Installation recommendations: •Above or below center visual line of pipe •Frequent intervals on straight pipe runs •Close to valves •Near branches and T’s •Any change in direction •Before and after pipe going through walls Fire quenching fluids WHITE ON RED Toxic and corrosive fluids BLACK ON ORANGE Flammable fluids BLACK ON YELLOW Combustible fluids WHITE ON BROWN Potable, cooling, boiler feed, and other water WHITE ON GREEN Compressed Air WHITE ON BLUE Self Stick Vinyl (PPMA) Snap On Pipe Markers (PPMS) •0.004" flexible vinyl marker has UV-resistant polyester overlaminate with high-tack, acrylic adhesive back •Included arrow provides proper directional flow marking •Durable, protective gloss surface withstands fading, abrasions, splashes, grease, dust, and dirt •Service temperature is –20° to 176° F •Precoiled, heavy gauge 0.020" rigid vinyl plastic is lightweight, yet durable to withstand tough industrial environments •Fits over pipes with dirty, greasy, or rough surfaces or other less than perfect surfaces •Easy to remove and reapply •Service temperature range is –4° to 158° F (not recommended for hot pipes) Part No. Legend Part No. Legend Part No. Legend Part No. 1001 1051 1103 1153 1003 1053 1105 1157 1005 1057 1107 1159 1007 1059 1109 1161 1009 1061 1111 1163 1011 1063 1113 1165 1013 1065 1115 1167 1015 1067 1117 1169 1017 1069 1119 1171 1019 1071 1121 1173 1021 1073 1123 1175 1023 1075 1125 1177 1025 1077 1127 1179 1027 1079 1129 1181 1029 1081 1131 1183 1031 1083 1133 1185 1033 1085 1135 1187 1035 1087 1137 1189 1037 1089 1139 1191 1039 1091 1141 1193 1041 1093 1143 1195 1043 1095 1145 1197 1045 1097 1147 1199 1047 1099 1149 1201 1049 1101 1151 1203 Legend Pipe Markers | ID Tags & Pipe Markers 800.777.3300 | Panduit.com Part No. Part No. Legend Legend Part No. Legend Part No. 1205 1285 1365 1443 1207 1287 1367 1445 1209 1289 1369 1447 1211 1291 1371 1449 1213 1293 1373 1451 1215 1295 1375 1453 1217 1297 1377 1457 1219 1299 1379 1459 1221 1301 1381 1461 1223 1303 1383 1463 1225 1305 1385 1465 1227 1307 1387 1467 1229 1309 1389 1469 1231 1311 1391 1471 1233 1313 1393 1473 1235 1315 1395 1475 1237 1317 1397 1477 1239 1319 1399 1479 1241 1321 1401 1481 1243 1323 1403 1483 1245 1325 1405 1485 1247 1327 1407 1487 1249 1329 1409 1489 1251 1331 1411 1491 1253 1333 1413 1493 1257 1335 1415 1495 1259 1337 1417 1497 1261 1339 1419 1499 1263 1341 1421 1501 1265 1343 1423 1503 1267 1345 1425 1505 1269 1347 1427 1507 1271 1349 1429 1509 1273 1351 1431 1511 1275 1353 1433 1513 1277 1357 1435 1515 1279 1359 1437 1517 1281 1361 1439 1519 1283 1363 1441 1521 Self Stick (PPMA) Legend Snap On Pipe Markers (PPMS) Size Code Pipe Diameter Marker Size UOM Size Code Pipe Diameter Marker Size UOM A 3/4" to 1 1/4" 1" x 8" Each A 3/4" to 1 1/4" 6" x 8" Each B 1 1/2" to 2" 1 1/2" x 8" Each B 1 1/2" to 2" 9" x 8" Each D 2 1/2" to 6" 2 1/2" x 12" Each C 2 1/4" to 3" 14" x 12" Each H 8" to 10" 4" x 24" Each E 3 1/4" to 5" 19" x 12"* Each F 5 1/4" to 6" 25" x 12"* Each *Have self-adhesive leading edge for secure fit How to Order Pipe Markers: 1 Select Material Code: Self Stick – PPMA 2 Select Pipe Marker Base Part Number: 1001 3 Select Size Code: 3/4" to 1 1/4" – A 4 Combine Codes in Specific Order for Complete Part Number: PPMA1001A 3 4 ID Tags & Pipe Markers | Pipe Markers Part No. Legend Part No. Legend Part No. Legend Part No. 1523 1561 1597 1633 1525 1563 1599 1635 1527 1565 1601 1637 1529 1567 1603 1639 1531 1569 1605 1641 1533 1571 1607 1643 1535 1573 1609 1645 1537 1575 1611 1647 1539 1577 1613 1649 1541 1579 1615 1651 1543 1581 1617 1653 1545 1583 1619 1657 1547 1585 1621 1659 1549 1587 1623 1661 1551 1589 1625 1663 1553 1591 1627 1665 1557 1593 1629 1667 1559 1595 1631 1669 Self Stick (PPMA) Legend Snap On Pipe Markers (PPMS) Size Code Pipe Diameter Marker Size UOM Size Code Pipe Diameter Marker Size UOM A 3/4" to 1 1/4" 1" x 8" Each A 3/4" to 1 1/4" 6" x 8" Each B 1 1/2" to 2" 1 1/2" x 8" Each B 1 1/2" to 2" 9" x 8" Each D 2 1/2" to 6" 2 1/2" x 12" Each C 2 1/4" to 3" 14" x 12" Each H 8" to 10" 4" x 24" Each E 3 1/4" to 5" 19" x 12"* Each F 5 1/4" to 6" 25" x 12"* Each *Have self-adhesive leading edge for secure fit How to Order Pipe Markers: 1 Select Material Code: Self Stick – PPMA 2 3 Select Pipe Marker Base Part Number: 1523 Color Banding Pipe Marking Tapes Select Size Code: 3/4" to 1 1/4" – A 4 Combine Codes in Specific Order for Complete Part Number: PPMA1523A Directional Flow Arrow Tapes Provide 360° visibility for flow direction, with repeated arrows on the tape’s length. Variety of colors are ideal for coding pipes. •0.005" tapes with self-adhesive back, no liner •Service temperature range -20° to 140°F •Available in 1", 2" and 3" widths • 108-ft. rolls •0.006" self-adhesive vinyl •Available in 1", 2" and 4" widths •54-ft. and 108-ft. rolls Available colors with color code: Available colors with color code: Red – RED, Green – GRN, Blue – BLU, Gray – GRY, Brown – BRN, Black – BLK, Yellow – YEL, Orange – ORN, White – WHT, Purple – PUR Black/Yellow – BY, Green/White – GW, Blue/White – BLW, Red/White – RW, Black/Orange – BO, White/Brown – WBR To Order: Add color code after part number. Meets ASME A13.1, 3.1 To Order: Add color code after part number. Example: Part No. PFM1X36 + Color Code YEL = PFM1X36YEL Example: Part No. PPMR1X54 + Color Code BY = PPMR1X54BY Part No. Size UOM Part No. Size UOM Part No. Size UOM PFM1X36 1" x 108-ft. Roll PPMR1X54 1" x 54-ft. Roll PPMR1X108 1" x 108-ft. Roll PFM2X36 2" x 108-ft. Roll PPMR2X54 2" x 54-ft. Roll PPMR2X108 2" x 108-ft. Roll PFM3X36 3" x 108-ft. Roll PPMR4X54 4" x 54-ft. Roll PPMR4X108 4" x 108-ft. Roll 5 Pipe Markers | ID Tags & Pipe Markers 800.777.3300 | Panduit.com Roll Tape Pipe Markers Easily mark pipes quickly at various locations along a piping system. •72 identical legends per roll, with perforations between each length •Use in continuous lengths, or tear at perforations •0.006" vinyl with protective laminate surface •Peel-off liner with self-adhesive back applies to smooth, clean, dry surface •Service temperature is -20° to 140°F •Available in 1" x 54-ft. or 2" x 54-ft. rolls Roll Tape Pipe Marker & Directional Flow Arrow Tapes shown. Part No. Legend Part No. Legend Part No. Legend Part No. Legend PPMR0102 PPMR0154 PPMR0122 PPMR0136 PPMR0101 PPMR0155 PPMR0123* PPMR0134 PPMR0144 PPMR0108 PPMR0124 PPMR0135 PPMR0145 PPMR0109* PPMR0125 PPMR0137 PPMR0103 PPMR0110 PPMR0126 PPMR0138 PPMR0146 PPMR0112 PPMR0127* PPMR0139 PPMR0104 PPMR0111* PPMR0128 PPMR0140 PPMR0147 PPMR0113 PPMR0129 PPMR0141 PPMR0148* PPMR0114 PPMR0130 PPMR0143 PPMR0149 PPMR0116 PPMR0131 PPMR0142 PPMR0150 PPMR0117* PPMR0132 PPMR0151 PPMR0118 PPMR0133 PPMR0105* PPMR0119 PPMR0106* PPMR0120 PPMR0152 PPMR0115 PPMR0153 PPMR0121 *Legends for 2" x 9" marker size will be abbreviated for space To Order: Add size code after part number. Example: Part No. PPMR0102 + Size Code B = PPMR0102B Size Code Pipe Diameter Roll Size Marker Size Letter Height B Up to 2" 1" x 54-ft. 1" x 9" 3/4" Roll H Up to 6" 2" x 54-ft. 2" x 9" 1 1/4" Roll UOM Roll Form Pipe Markers Wrap around virtually any size pipe when you have multiple pipes or pipes of unknown sizes. •Unroll, measure, and easily cut to length on-site for proper fit •0.004" gloss, overlaminated poly vinyl marker wraps to adhere to itself Part No. Legend Part No. •High-tack, acrylic adhesive back stays on dirty, greasy, and rusty pipes •Legend and arrow repeated, upright and upside-down, for universal direction and visibility •Service temperature is -20° to 140°F •Available 8" x 30-ft. or 12" x 30-ft. in rolls Legend Part No. Legend PPMR0028 PPMR0011 PPMR0022 PPMR0029 PPMR0031 PPMR0023 PPMR0001 PPMR0012 PPMR0024 PPMR0030 PPMR0013 PPMR0025 PPMR0002 PPMR0014 PPMR0027 PPMR0003 PPMR0015 PPMR0026 PPMR0004 PPMR0016 PPMR0006 PPMR0032 PPMR0005 PPMR0017 PPMR0007 PPMR0018 PPMR0008 PPMR0019 Size Code Pipe Diameter Roll Size Letter Height UOM PPMR0020 B Up to 2" 8" x 30-ft. 3/4" Roll H Up to 6" 12" x 30-ft. 1 1/4" Roll PPMR0009 PPMR0010 PPMR0021 To Order: Add size code after part number. Example: Part No. PPMR0029 + Size Code H = PPMR0029H ID Tags & Pipe Markers | Specialty Pipe Markers 6 IIAR Ammonia Pipe Markers Meets IIAR guidelines for proper pipe marking as specified in Bulletin No. 114. Self Stick Part No. System System Abbreviation Physical State Pressure Level PPMA3001 Booster Discharge BD VAP LOW Identify Ammonia refrigeration piping and system components. PPMA3002 Condenser Drain CD LIQ HIGH •0.004" flexible vinyl, self-sticking markers have high-tack adhesive backed with liner •One legend with directional flow arrows on each end to cut off for proper placement •Glossy UV-resistant surface withstands dust, dirt and grease •Service temperature range is -20° to 176°F •Install onto clean smooth pipe surface PPMA3003 Defrost Condensate DC LIQ HIGH PPMA3004 Hot Gas HG VAP HIGH PPMA3005 Hot Gas Defrost HGD VAP HIGH PPMA3006 High Pressure Liquid. HPL LIQ HIGH PPMA3007 High Stage Discharge HSD VAP HIGH PPMA3008 High Stage Suction HSS VAP LOW PPMA3009 High Temperature Recirculated Liquid HTRL LIQ LOW To Order: Add size code after part number. PPMA3010 High Temperature Recirculated Suction HTRS LIQ/VAP LOW PPMA3011 Liquid Injection Cooling LIC LIQ HIGH Example: Part No. PPMA3001 + Size Code A = PPMA3001A Size Code Pipe Diameter Marker Size UOM PPMA3012 Low Stage Suction LSS VAP LOW A 3/4" x 1 1/4" 1" x 11" Each PPMA3013 Low Temperature Recirculated Liquid LTRL LIQ LOW B 1 1/2" x 2" 1 1/2" x 15 7/8" Each PPMA3014 Low Temperature Recirculated Suction LTRS LIQ/VAP LOW C 2 1/2" x 6" 2 1/2" x 23 5/8" Each PPMA3015 Low Temperature Suction LTS VAP LOW D 8" x 10" 3 1/2" x 33 1/2" Each PPMA3016 Relief Vent RV — — Duct Markers Medical Gas Pipe Markers Identify the contents of medical gas piping systems. •0.004" gloss vinyl, 3" x 3" marker with legend repeated five times, upright and upside-down for universal fit and visibility •Adhesive backed and peel-off liner •Adhere to pipes up to 3/4" OD size •Service temperature is -20° to 140°F •20 markers per package Mark air flow and its equipment purpose in duct work systems. •Single legend printed on poly overlaminated self-stick vinyl •High-tack adhesive back •Available in two sizes Part No. Legend Part No. Legend PPMA41 EXHAUST PPMA45 RELIEF PPMA42 EXHAUST AIR PPMA46 RELIEF AIR PPMA43 INTAKE AIR PPMA47 RETURN AIR PPMA44 OUTSIDE AIR PPMA48 SUPPLY AIR Part No. Legend Part No. PPMA4001 PPMA4006 PPMA4002 PPMA4007 PPMA4012 Available colors with color code: PPMA4003 Black/Yellow – BY, White/Green – WG, White/Blue – WBL PPMA4010 EVAC Legend PPMA4008 PPMA4009 INSTRUMENT AIR PPMA4011 WAGD PPMA4004 Size Std. Pkg. Qty. PPMA4005 3" x 3" 20 PPMA4013 To Order: Add color code, then size code after part number. Example: Part No. PPMA41 + Color Code BY + Size Code D = PPMA41BYD Size Code Pipe Diameter Marker Size Arrow Size Letter Height UOM D Up to 6" 2 1/2" x 12" 2 1/2" x 2 1/2" 1 1/4" Each H Up to 10" 4" x 24" 4" x 4" 2 1/2" Each Meets NFPA 99C-Section 4-3.5.4.1. and CGA Pamphlet C-9 Section 4.1 color requirements