12mm Stud Mounts ® SPECIFICATION SHEET specifications Stud mounts used with heavy cable ties shall provide an economical method of replacing cushion clamps, pipe hangers, and other metal clamps used in heavy duty OEM and transportation equipment. The stud mount shall be hammered on or spun on existing weld studs, Huck-Spin* bolts or exposed standard bolts. Optionally, the mount can be secured with PANDUIT ® STA-STRAP ® Chassis/Panel Mount Ties through the frame. The installed mount shall exceed the minimum loop tensile of the cable tie for which it is designed. The material shall be UV resistant and meet the application temperature and the recognized static ground storage requirements for heavy vehicles. The material shall be impact resistant and resist all common fuels, salt spray, and wash down chemicals. 12mm Stud Mount 12mm stud diameter: TMSTHS12-D0 Existing Products 10mm stud diameter: TMSTHS10-D0 1/2'' stud diameter: TMSTHS13-D0 technical information 16mm stud diameter: TMSTHS16-D0 Material: Impact modified weather resistant Nylon 6.6 3/4'' stud diameter: TMSTHS19-D0 Flammability: Meets UL94 HB, passes FMVSS 302 Color: Black 5mm stud diameter: TMSTLHS5-M0 6mm stud diameter: TMSTLHS6-M0 8mm stud diameter: TMSTLHS8-M0 Application temperature range: -60°C to 85°C (-76°F to 185°F) continuous Chemical resistance at 21°C (70°F): Excellent resistance to common transportation fluids including: ethyl and methyl alcohol, ethylene glycol, diesel fuel, gasoline, jet fuel, hydraulic fluid, muriatic acid (wash down), transmission fluids and 10% salt solutions Environmental compliance: 2000/53/EC ELV, 2002/95/EC RoHS Anchor force: Up to 300 pounds key features and benefits One-piece design Eliminates washers, nuts, and bolts; saving labor and materials for a lower installed cost Two-sided design Provides positive segregation of air, electrical, and pneumatic lines along the length of the chassis with easy access for one or two cable ties; allowing for easier installation, inspection, and service For use with heavy cable ties Provides up to 250 pounds of hold down force; safely securing hoses, wire bundles, and air lines Impact modified weather resistant Nylon 6.6 Provides a longer service life; reducing maintenance and warranty issues Production Parts Approval Process (PPAP), 3-D, and International Materials Data Sheet (IMDS) capability Meets the needs of Verband der Automobilindustrie (VDA) and Automotive Industry Action Group (AIAG) compliant documentation; allowing parts to be listed in IMDS site ID applications PANDUIT stud mounts are a reliable and cost-effective solution for using existing fasteners to route and secure heavy wire, cable, hydraulics and coolant hoses in the OEM, aerospace, marine, heavy truck and automotive markets. The 12mm size is the latest addition to the existing stud mount product line.The mount becomes part of the chassis and no maintenance is required on the mount itself. Designed as a two-sided mount, it doubles as an anchor and provides separation for two parallel bundles. Molded from rugged impact resistant materials, the mounts can be hammered on or used with the PANDUIT installation tool combined with any torque limited driver to easily spin on the mounts. *Huck-Spin is a registered trademark of Huck International, Inc. w w w. p a n d u i t . c o m 12mm Stud Mounts ordering information Part Number TMSTHS12-D0 Used With Cable Ties Mounting Method Length A In. mm Width B In. mm Height C Slot Width D In. mm In. mm Miniature, Intermediate, Standard, Heavy-Standard, Light-Heavy, Heavy 12mm stud diameter 1.99 50.5 1.00 25.4 1.10 27.9 .37 9.4 Std. Pkg. Color Qty. Material Impact Modified Weather Resistant Nylon 6.6 Black 500 Std. Ctn. Qty. — A C B D existing products Part Number TMSTHS10-D0 TMSTHS13-D0 TMSTHS16-D0 TMSTHS19-D0 Used With Cable Ties Miniature, Intermediate, Standard, Heavy-Standard, Light-Heavy, Heavy Mounting Method 10mm stud diameter 1/2" stud dia. (13mm) 16mm stud diameter 3/4" stud dia. (19mm) Length A Width B Height C Slot Width D In. mm In. mm In. mm In. mm 1.99 50.5 1.00 25.4 1.10 27.9 .37 9.4 1.99 50.5 1.00 25.4 1.10 27.9 .37 9.4 1.99 50.5 1.00 25.4 1.10 27.9 .37 9.4 1.99 50.5 1.00 25.4 1.10 27.9 .37 9.4 Std. Pkg. Color Qty. 500 Material Impact Modified Weather Resistant Nylon 6.6 Black Std. Ctn. Qty. — 500 — 500 — 500 — A C Part Number TMSTLHS5-M0 TMSTLHS6-M0 TMSTLHS8-M0 Used With Cable Ties Miniature, Intermediate, Standard, Heavy-Standard, Light-Heavy Mounting Method 5mm stud diameter 6mm stud diameter 8mm stud diameter B D Length A In. mm 1.25 31.8 Width B In. mm .48 12.2 Height C Slot Width D In. mm In. mm .95 24.1 .32 8.1 1.25 31.8 .48 12.2 .95 24.1 .32 8.1 1.25 31.8 .48 12.2 .95 24.1 .32 8.1 Std. Std. Pkg. Ctn. Color Qty. Qty. 1000 5000 Material Impact Modified Weather Resistant Nylon 6.6 Black 1000 5000 1000 5000 A C B D WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.3767.7011 PANDUIT LATIN AMERICA Jalisco, Mexico [email protected] Phone: 52.333.777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800-777-3300 and reference WASP09 ©2008 PANDUIT Corp. ALL RIGHTS RESERVED. WW-WASP09 10/2008