Test Jacks 2 mm System 61010 MSEB 2600 G M3 Au Type 61010 61010 MSEB 2610 F2.8 Au 2mm panel mount safety test jack, gold plated brass with M3 thread and solder terminal. max. installation wall thickness 8mm. MSEB 2630 S1.9 Au 2mm panel mount safety test jack, gold plated brass with flat 2.8x0.8mm DIN46244 terminal. max. installation wall thickness 8mm. 2mm panel mount safety test jack, gold plated brass with 1.9mm solder pin terminal. max. installation wall thickness 8mm. 2 mm 2 mm 2 mm 975454700 975455700 975459700 975454701 975455701 975459701 975454702 975455702 975459702 975454703 975455703 975459703 975454704 975455704 975459704 975454705 975455705 975459705 975454706 975455706 975459706 975454707 975455707 975459707 975454709 975455709 975459709 Contact Type jack Ø 2 mm jack Ø 2 mm jack Ø 2 mm Connection Type M3 thread, solder terminal AC/DC 1000V flat 2.8x0.8 mm push in tab AC/DC 1000V solder terminal AC/DC 1000V CAT III CAT III CAT III 10 A 5 mOhm screw thread M8 10 A 5 mOhm screw thread M8 10 A 5 mOhm screw thread M8 Pin Diameter PART NO. / Housing color Technical Data Voltage Rating Measurement Category (IEC61010) Current Rating* Contact Resistance Mounting Type Material Specifications Jack Body gold plated brass gold plated brass gold plated brass Contact Spring – – – Housing Polyamide Polyamide Polyamide Environmental Conditions Temperature Range -15°C to +70°C (5 to 158°F) -15°C to +70°C (5 to 158°F) -15°C to +70°C (5 to 158°F) Flamability Rating Housing UL 94 V-2 UL 94 V-2 UL 94 V-2 Drawing Measurements are shown in millimeters. Multiply by 0.03937 to convert to inches. 12 12 12 9 M8 x 0,75 31 2 2 M8 x 0,75 28 ø2 6 2 M8 x 0,75 28 * Please consider derating graph on page 80. 58 For the latest on Altech Test & Measurement specifications please visit www.altechcorp.com/test-equipment ø 9,9 ø1,9 6 ø 9,9 ø2 ø 9,9 ø2 M3 2,8 x 0,8