200

SENSITRON
__
SEMICONDUCTOR
S50A360FR
S50A340FR
TECHNICAL DATA
DATA SHEET 200, REV D
THREE PHASE FULL WAVE
BRIDGE RECTIFIER ASSEMBLY
DESCRIPTION: 600 VOLT, 50 AMP, 195 NANOSECOND THREE PHASE BRIDGE RECTIFIER ASSEMBLY.
MAX. RATINGS / ELECTRICAL CHARACTERISTICS
RATING
Peak Inverse Voltage (PIV)
All ratings are at TA = 25oC unless otherwise specified.
CONDITIONS
MIN
MAX
UNIT
S50A360FR
-
600
Vdc
S50A340FR
o
TC = 55 C
400
Average DC Output Current
(TC = Case Temp)
TC = 100 C
(Io)
33
TC = 125 oC
25
Average DC Output Current
Ambient Temp.
TA = 25 oC
12.5
10
TA = 100 oC
6.0
tp = 8.3 ms Single Half Cycle
Sine Wave, Superimposed On
Rated Load
TA = 25 oC
If = 10A (300 μsec pulse, duty
cycle < 2%)
Maximum Forward Voltage
(Vf)
50
TA = 55 C
Peak Recurring Surge Current
(IFRM)
Operating and Storage Temp.
(Top & Tstg)
-
o
(no heat sink) (Io)
Peak Single Cycle Surge
Current (IFSM)
-
o
Amps
Amps
-
240
Amps(pk)
-
150
Amps
-55
+150
°C
-
1.2
Volts
-
9.0
μAmps
Maximum Instantaneous
Reverse Current At Rated
(PIV)
TA = 100°C
Reverse Recovery Time (trr)
If = 0.5A, Ir = 1.0A, Irr = 0.25A
-
195
nsec
Thermal Resistance (θJL)
-
-
0.9
°C/W
TA = 25° C
180
©1998 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected]
S50A360FR
S50A340FR
SENSITRON
TECHNICAL DATA
DATA SHEET 200, REV D
MECHANICAL DIMENSIONS: In inches / mm
0.64 (16.3
0.56 14.2)
0.64 (16.3
0.56 14.2)
.34 (8.64
.26 6.60)
.34 (8.64
.26 6.60)
+
AC
AC
AC
–
2.00
(50.8)
.36 (8.89
.27 6.86)
.171(4.34) Dia.
5 Places
.30(7.62)
5 Places
.36 (8.89
.27 6.86)
1.25 Max
(31.7)
.63
(16.0)
10-32 Thd x .25 (6.35) Deep
(2 Places)
+
.50
(12.7)
1.00
(25.4)
1.50
(38.1)
AC AC AC
–
Note: Case finish - Black Anodized
Fig. 412
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©1998 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected]