2010

S6A305FR
S6A310FR
S6A320FR
S6A340FR
S6A360FR
SENSITRON
_____
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 2010, REV. B
THREE PHASE FULL WAVE
BRIDGE RECTIFIER ASSEMBLY
DESCRIPTION: A 50/100/200/400/600 VOLT, 5.0 AMP, 180 NANOSECOND THREE PHASE BRIDGE
RECTIFIER ASSEMBLY.
MAX. RATINGS / ELECTRICAL CHARACTERISTICS
RATING
Peak Inverse Voltage
(PIV)
S6A305FR
S6A310FR
S6A320FR
S6A340FR
S6A360FR
All ratings are at TA = 25oC unless otherwise specified.
CONDITIONS
MIN
TYP
-
-
-
MAX
Vdc
50
100
200
400
600
TC = 55 oC
Average DC Output
Current (TC = Case Temp)
TC = 100 C
(Io)
3.5
TC = 125 oC
2.5
o
TA = 25 C
Maximum Forward
Voltage
-
-
TA = 55 c
5.0
2.0
Amps
Amps
1.5
O
TA = 100 c
tp = 8.3 ms Single
Half Cycle Sine
Wave,
Superimposed On
Rated Load
TA = 25 oC
Peak Recurring Surge
Current
(IFRM)
Operating and Storage
Temp.
(Top & Tstg)
-
O
(Io)
Peak Single Cycle Surge
Current
(IFSM)
-
o
Average DC Output
Current Ambient Temp.
(no heat sink)
UNIT
If = 3.0A (300 µsec
pulse, duty cycle <
2%)
(Vf)
1.0
-
-
25
Amps(pk)
-
-
9.0
Amps
-55
-
+150
°C
-
-
1.7
Volts
-
-
2.0
µAmps
Maximum Instantaneous
Reverse Current At Rated
(PIV)
Reverse Recovery Time
(trr)
TA = 25° C
If = 0.5A, Ir = 1.0A, Irr
= 0.25A
-
-
180
nsec
Thermal Resistance (θJL)
-
-
-
4.0
°C/W
50
TA = 100° C
• 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •
S6A305FR
S6A310FR
S6A320FR
S6A340FR
S6A360FR
SENSITRON
TECHNICAL DATA
DATA SHEET 2010, REV. B
MECHANICAL DIMENSIONS: In Inches / mm
.465 (11.81)
.50(12.70)
Max
.250 (6.35
.180 4.57)
.280(7.11) Max
.21 (5.33
.15 3.81)
AC
.39 (9.91
.33 8.38)
AC
.050 (1.27)
1.25 (31.75)
1.062 (26.98)
.70 (17.78
.62 15.75)
AC
+
+
–
AC AC AC
.093 (2.36)
4-40 UNC
(2 Places)
.26 (6.60
.20 5.08)
.075 (1.91)
–
FIG. 409
Note: Case finish - Black Anodized
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]
Similar pages