JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 75SA-053 SOLID-STATE SWITCH ASSEMBLY Frequency Range 45-1003 MHz Configuration 1P80T self-terminating solid-state RF switch Enclosure Type 19 inch rack mount @ 5RU high Startup/Default States (configurable) RF Switch off at startup (see SWITCH command) DHCP enabled (see NET command) 4 Ethernet users (see NET command) Prompts off (see PROMPT command) Impedance 75 Ohms nominal VSWR 1.5:1 typical 1.7:1 maximum Insertion Loss 2.5 dB typical 45-500MHz 4.0 dB typical 500-1003MHz 5.0 dB maximum 45-1003MHz Isolation 65 dB typical 55 dB minimum RF Input Power +20 dBm Switching Speed 50 microseconds (after command is received and processed) (3 milliseconds typical processing time) Manual Control 20-Button Keypad and LCD display (IP Address configurable via keypad) (Net mask configurable via keypad) (Gateway configurable via keypad) (Baud rate configurable via keypad) Remote Control Ethernet (DHCP, TCP/IP, 10/100, up to 12 users) RS-232 (up to 115200 Baud) Remote Commands RF Switch Control Commands: Switch, Set Switch, Read Switch System Commands: Help, Identification, Store, Recall, Pause, Net, Serial, Close, Disconnect, MOTD, Date, Message, Restrict, IDENT, Name, Show Users, Reboot, Uptime, Prompt --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 75SA-053 SOLID-STATE SWITCH ASSEMBLY AC Supply 100-240 VAC @ 47-63 Hz 4 Amp 5x20mm "Slo-Blo" AC fuse Littelfuse #215-004, JFW #025-018 RF Connector F female Operating Temperature Range 0º to +50º C Physical Size See outline drawing 092-6644 ECR/ECN # DATE REV 07/14/2010 24239 Page 2 of 2 12/09/2014 APPR / DATE ECR/ECN # BAC 07/14/2010 A TRS 12/09/2014 JFW FORM E-7-F REV F DATE REV APPR / DATE