Plastic Packages for Integrated Circuits QFN (Quad Flat No-Lead) Package Family MDP0046 QFN (QUAD FLAT NO-LEAD) PACKAGE FAMILY (COMPLIANT TO JEDEC MO-220) A MILLIMETERS D N (N-1) (N-2) B 1 2 3 PIN #1 I.D. MARK E (N/2) 2X 0.075 C 2X 0.075 C N LEADS TOP VIEW 0.10 M C A B (N-2) (N-1) N b L SYMBOL QFN44 QFN38 TOLERANCE NOTES A 0.90 0.90 0.90 0.90 ±0.10 - A1 0.02 0.02 0.02 0.02 +0.03/-0.02 - b 0.25 0.25 0.23 0.22 ±0.02 - c 0.20 0.20 0.20 0.20 Reference - D 7.00 5.00 8.00 5.00 Basic - Reference 8 Basic - Reference 8 Basic - D2 5.10 3.80 5.80 3.60/2.48 E 7.00 7.00 8.00 1 2 3 6.00 E2 5.10 5.80 5.80 4.60/3.40 e 0.50 0.50 0.80 0.50 L 0.55 0.40 0.53 0.50 ±0.05 - N 44 38 32 32 Reference 4 ND 11 7 8 7 Reference 6 NE 11 12 8 9 Reference 5 MILLIMETERS PIN #1 I.D. 3 QFN32 SYMBOL QFN28 QFN24 QFN20 QFN16 A 0.90 0.90 0.90 0.90 0.90 ±0.10 - A1 0.02 0.02 0.02 0.02 0.02 +0.03/ -0.02 - b 0.25 0.25 0.30 0.25 0.33 ±0.02 - c 0.20 0.20 0.20 0.20 0.20 Reference - D 4.00 4.00 5.00 4.00 4.00 Basic - D2 2.65 2.80 3.70 2.70 2.40 Reference - (E2) (N/2) NE 5 7 (D2) BOTTOM VIEW 0.10 C e C SEATING PLANE TOLERANCE NOTES E 5.00 5.00 5.00 4.00 4.00 Basic - E2 3.65 3.80 3.70 2.70 2.40 Reference - e 0.50 0.50 0.65 0.50 0.65 Basic - L 0.40 0.40 0.40 0.40 0.60 ±0.05 - N 28 24 20 20 16 Reference 4 ND 6 5 5 5 4 Reference 6 NE 8 7 5 5 4 Reference 5 Rev 11 2/07 0.08 C N LEADS & EXPOSED PAD SEE DETAIL "X" NOTES: 1. Dimensioning and tolerancing per ASME Y14.5M-1994. 2. Tiebar view shown is a non-functional feature. SIDE VIEW 3. Bottom-side pin #1 I.D. is a diepad chamfer as shown. 4. N is the total number of terminals on the device. (c) C 5. NE is the number of terminals on the “E” side of the package (or Y-direction). 2 A (L) A1 N LEADS DETAIL X 6. ND is the number of terminals on the “D” side of the package (or X-direction). ND = (N/2)-NE. 7. Inward end of terminal may be square or circular in shape with radius (b/2) as shown. 8. If two values are listed, multiple exposed pad options are available. Refer to device-specific datasheet. 1