553

SENSITRON
SEMICONDUCTOR
SHD219405
TECHNICAL DATA
DATA SHEET 553, REV -
HERMETIC POWER MOSFET
N-CHANNEL
FEATURES:
œ 500 Volt, 0.85, Ohm, 5.5Amp MOSFET
œ Isolated and Hermetically Sealed
œ Surface Mount Package
MAXIMUM RATINGS
ALL RATINGS ARE AT TA = 25•C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT
TC = 25•C
PULSED DRAIN CURRENT
@ TC = 25•C
OPERATING AND STORAGE TEMPERATURE
TERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25•C
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 1.0mA
DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 3.5A
GATE THRESHOLD VOLTAGE
VDS = VGS, ID = 250mA
FORWARD TRANSCONDUCTANCE
VDS ˜ 15V, ID = 3.5A
ZERO GATE VOLTAGE DRAIN CURRENT, TJ = 25•C
(VDS = 0.8 x Max. Rating, VGS = 0V), TJ = 125•C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TOTAL GATE CHARGE
VGS = 10V,
GATE TO SOURCE CHARGE
VDS = 250V,
GATE TO DRAIN CHARGE
ID = 5.5A
TURN ON DELAY TIME
VDD = 250V,
RISE TIME
ID = 5.5A,
TURN OFF DELAY TIME
RG = 9.1W,
FALL TIME
VGS = 10V
CONTIUOUS SOURCE CURRENT
DIODE FORWARD VOLTAGE
TJ = 25•C,IS = 5.5V
VGS = 0V
REVERSE RECOVERY TIME
TJ = 25•C,
IS = 5.5A,
di/dt ˆ = -100A/msec,
REVERSE RECOVERY CHARGE
VDD ˆ 50V
INPUT CAPACITANCE
VGS = 0V, VDS = 25V,
OUTPUT CAPACITANCE
f = 1.0MHz
REVERSE TRANSFER CAPACITANCE
SYMBOL
VGS
ID
IDM
TOP/TSTG
R JC
PD
MIN.
-55
-
TYP.
-
MAX.
–20
5.5
22
+150
0.62
200
UNITS
Volts
Amps
Amps
•C
•C/W
Watts
BVDSS
500
-
-
Volts
RDS(ON)
VGS(th)
gfs
-
-
2.0
4.7
-
IDSS
-
-
IGSS
-
-
Qg
Qgs
Qgd
td(ON)
tr
td(OFF)
tf
IS
VSD
-
-
-
-
21
73
72
51
5.5
-
-
-
trr
Qrr
Ciss
Coss
Crss
-
1300
310
120
0.85
4.0
25
250
100
-100
68.5
12.5
40.5
-
W
Volts
S(1/W)
mA
nA
nC
nsec
1.5
Amps
Volts
700
nsec
8.9
-
mC
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - [email protected]
pF
SHD219405
SENSITRON
DATA SHEET 553
REVISION -
MECHANICAL DIMENSIONS: in Inches / mm
.145
(3.68)
.037
(.94)
.030 (.76) Min.
.050 (1.27)
2
.375
(9.53)
.140 (3.56)Typ.
1
.035 (.89) Min. .450 (11.43)
3
.415
(10.54)
.157 (3.99)
.625
(15.88)
LCC-3P
PINOUT TABLE
DEVICE TYPE
MOSFET
LCC-3P PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - [email protected]
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]