338

SHD219451
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 338, REV C
HERMETIC POWER MOSFET
P-CHANNEL
FEATURES:
• 55 Volt, 0.024, Ohm MOSFET
• Isolated and Hermetically Sealed
• Surface Mount Package
MAXIMUM RATINGS
ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT VGS = -10V, TC = 25°C
VGS = -10V, TC = 100°C
PULSED DRAIN CURRENT
@ TC = 25°C
OPERATING AND STORAGE TEMPERATURE
TERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25°C
SYMBOL
VGS
ID
MIN.
-
TYP.
-
UNITS
Volts
Amps
-
MAX.
±20
-74
-52
-260
+175
0.75
200
IDM
TOP/TSTG
RθJC
PD
-55
-
BVDSS
-50
-
-
Volts
-
-
Amps
°C
°C/W
Watts
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = -1.0mA
DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = -38A
VGS = 10V, ID = -38A, TC = 125°C
GATE THRESHOLD VOLTAGE VDS = VGS, ID = -250µA
FORWARD TRANSCONDUCTANCE
VDS ≥ 10V, ID = -38A
ZERO GATE VOLTAGE DRAIN CURRENT, TJ = 25°C
(VDS = -44V, VGS = 0V), TJ = 125°C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TOTAL GATE CHARGE
VGS = -10V,
GATE TO SOURCE CHARGE
VDS = -44V,
GATE TO DRAIN CHARGE
ID = 5.5A
TURN ON DELAY TIME
VDD = -28V,
RISE TIME
ID = -38A,
TURN OFF DELAY TIME
RG = 2.5Ω,
FALL TIME
VGS ≥ 10V
DIODE FORWARD VOLTAGE
TJ = 25°C,IS = -38V
VGS = 0V
REVERSE RECOVERY TIME
TJ = 25°C,
IS = -10A,
di/dt ≤ = -100A/µsec,
REVERSE RECOVERY CHARGE
VDD ≤ 30V
INPUT CAPACITANCE
VGS = 0V, VDS = 25V,
OUTPUT CAPACITANCE
f = 1.0MHz
REVERSE TRANSFER CAPACITANCE
RDS(ON)
VGS(th)
gfs
2.0
21
-
IDSS
-
-
IGSS
-
-
Qg
Qgs
Qgd
td(ON)
tr
td(OFF)
tf
VSD
-
-
-
-
18
99
61
96
-
trr
-
Qrr
Ciss
Coss
Crss
Ω
0.024
0.042
4.0
25
250
100
-100
180
32
86
-
Volts
S(1/Ω)
µA
nA
nC
nsec
1.4
Volts
130
-
nsec
-
350
-
µC
-
3400
1400
640
-
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
pF
SHD219451
SENSITRON
DATA SHEET 338
REVISION C
MECHANICAL DIMENSIONS: in Inches / mm
.145
(3.68)
.037
(.94)
.030 (.76) Min.
.050 (1.27)
2
.375
(9.53)
.140 (3.56)Typ.
1
.035 (.89) Min. .450 (11.43)
3
.415
(10.54)
.157 (3.99)
.625
(15.88)
LCC-3P
PINOUT TABLE
DEVICE TYPE
P-CHANNEL MOSFET
LCC-3P PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
SCHEMATIC
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
SHD219451
SENSITRON
DATA SHEET 338
REVISION C
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected]
Similar pages