Super 247 RoHS Compliance Document Contents: 1. Composition 2. Tin Whisker Report The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. July 2014 SUPER-247 Component Material Name Material Mass (g) Element Name Composition Si SiO2 Epoxy Other Cu Fe Sn Ag Sb Al Ni Sn Total Weight (g) Chip Silicon 0.05530 Encapsulant Epoxy Resin 0.81510 Lead Frame Copper 5.35810 Die Attach J-Alloy 0.02730 Wire Bond Aluminum 0.04780 Lead Finish Matte Tin over Nickel* 0.07060 CAS # Substance Mass (g) 7440-21-3 7631-86-9 90598-46-2 7440-50-8 7439-89-6 7439-92-1 7440-22-4 7440-36-0 7429-90-5 7440-02-0 7440-31-5 0.05530 0.66267 0.06521 0.08722 5.33131 0.02679 0.01774 0.00683 0.00273 0.04780 0.00988 0.06072 Material Analysis Weight (%) 100% 81% 8% 11% 100% 0% 65% 25% 10% 100% 14% 86% % of Total Weight 0.9% 10.4% 1.0% 1.4% 83.6% 0.4% 0.3% 0.1% 0.0% 0.7% 0.2% 1.0% 6.37420 *Tin whisker mitigation strategy is nickel under-plate. This part is compliant with EU Directive 2011/65/EU (RoHS Directive) and does not contain lead, mercury, cadmium (0.01%), hexavalent chromium, PBB or PBDE in concentrations greater than 0.1%, except as permitted by Annex (7). The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. 1 July 2014 SUPER-247 Test Definition Room Temperature Humidity Storage Temperature Humidity Unbiased Inspection Total Interval Class Duration 1 and 2 Class 1 and 2 Products Products Test Conditions Maximum Whisker Length (µm) 30± 2°C/60± 3% RH 1000 hours 4000 hours 20 55± 3°C/85± 3% RH 1000 hours 4000 hours 20 -40 to 55°C to 80 to 95°C, 500 cycles 1500 cycles air to air, 10 min soak, approx 3 cycles /hours Tin Whisker testing per JESD201, Environmental Acceptance Requirements for Tin Whisker Susceptibility of Tin and Tin Alloy Surface Finish Temperature Cycling 45 Tin Whisker Results (number of failing whiskers) Test Room Temperature Humidity Storage Temperature Humidity Unbiase Test d Temperature Cycling 1000 Hours 2000 Hours 3000 Hours 4000 Hours 0/24 0/24 0/24 0/24 0/24 0/24 0/24 0/24 500 Cycles 1000 Cycles 0/24 0/24 1500 Cycles 0/24 The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. 2 July 2014