Super 220 RoHS Compliance Document Contents: 1. Composition 2. Tin Whisker Report The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. July 2015 SUPER-220 Component Material Name Material Mass (g) Element Name Composition CAS # Substance Mass (g) Si SiO2 Epoxy Other Cu Fe Sn Ag Sb Al Ni 7440-21-3 7631-86-9 90598-46-2 7440-50-8 7439-89-6 7440-31-5 7440-22-4 7440-36-0 7429-90-5 7440-02-0 0.01777 0.69713 0.13943 0.09296 1.11151 0.00559 0.01047 0.00403 0.00161 0.00770 0.01518 Material Analysis Weight (%) 100% 75% 15% 10% 99% 1% 65% 25% 10% 100% 14% Sn 7440-31-5 0.09322 86% Chip Silicon 0.01777 Encapsulant Epoxy Resin 0.92952 Lead Frame Copper 1.11710 Die Attach J-Alloy 0.01611 Wire Bond Copper Matte Tin over Nickel* 0.00770 Lead Finish 0.10840 Total Weight (g) % of Total Weight 0.8% 31.7% 6.3% 4.2% 50.6% 0.3% 0.5% 0.2% 0.1% 0.4% 0.7% 4.2% 2.19660 *Tin whisker mitigation strategy is nickel under-plate. This part is compliant with EU Directive 2011/65/EU (RoHS Directive) and does not contain lead, mercury, cadmium (0.01%), hexavalent chromium, PBB or PBDE in concentrations greater than 0.1%, except as permitted by Annex (7). July 2015 The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. SUPER-220 Test Definition Room Temperature Humidity Temperature Humidity Unbiased Temperature Cycling Test Conditions Inspection Total Interval Class Duration 1 and 2 Class 1 and 2 Products Products Maximum Whisker Length (µm) 30± 2°C/60± 3% RH 1000 hours 4000 hours 20 55± 3°C/85± 3% RH 1000 hours 4000 hours 20 500 cycles 1500 cycles 45 -40 to 55°C to 80 to 95°C, air to air, 10 min soak, approx 3 Tin Whisker testing per JESD201, Environmental Acceptance Requirements for Tin Whisker Susceptibility of Tin and Tin Alloy Surface Finish Tin Whisker Results (number of failing whiskers) Test Room Temperature Humidity Storage Temperature Humidity Test Temperature Cycling 1000 Hours 2000 Hours 3000 Hours 4000 Hours 0/24 0/24 0/24 0/24 0/24 0/24 0/24 0/24 500 Cycles 1000 Cycles 0/24 0/24 1500 Cycles 0/24 July 2015 The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages.