VS-VSKCS408/060 www.vishay.com Vishay Semiconductors ADD-A-PAK Generation VII Power Modules Schottky Rectifier, 400 A FEATURES • 150 °C TJ operation • Low forward voltage drop • High frequency operation • Low thermal resistance • UL approved file E78996 • Designed and qualified for industrial level • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 ADD-A-PAK BENEFITS • Excellent thermal performances obtained by the usage of exposed direct bonded copper substrate PRODUCT SUMMARY IF(AV) 400 A VR 60 V Package ADD-A-PAK Circuit Two diodes common cathodes • High surge capability • Easy mounting on heatsink MECHANICAL DESCRIPTION The ADD-A-PAK generation VII, new generation of ADD-A-PAK module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structure with minimized number of interfaces. ELECTRICAL DESCRIPTION The VS-VSKCS408/060 Schottky rectifier common cathode has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in high current switching power supplies, plating power supplies, UPS systems, converters, freewheeling diodes, welding, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS Rectangular waveform VRRM IFSM tp = 5 μs sine VF 200 Apk, TJ = 125 °C TJ Range VALUES UNITS 400 A 60 V 25 500 A 0.71 V -55 to 150 °C VS-VSKCS408/060 UNITS 60 V VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM Revision: 14-Mar-14 Document Number: 94637 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKCS408/060 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current per module per leg SYMBOL TEST CONDITIONS IF(AV) 50 % duty cycle at TC = 102 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse Following any rated load condition and with rated VRRM applied VALUES UNITS 400 200 25 500 A Maximum peak one cycle non-repetitive surge current IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 5.5 A, L = 1 mH 15 mJ Repetitive avalanche current IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 1 A SYMBOL TEST CONDITIONS VALUES UNITS 10 ms sine or 6 ms rect. pulse 3300 ELECTRICAL SPECIFICATIONS PARAMETER 200 A Maximum forward voltage drop VFM 400 A 200 A 400 A Maximum reverse leakage current IRM Maximum junction capacitance CT Typical series inductance LS Maximum voltage rate of change dV/dt Maximum RMS insulation voltage VINS TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C VR = Rated VR VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body Rated VR 50 Hz 0.74 1.09 0.71 V 1.02 2.2 650 11 000 mA pF 5.0 nH 10 000 V/μs 3000 (1 min) 3600 (1 s) V VALUES UNITS - 55 to 150 °C THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case per leg RthJC Typical thermal resistance, case to heatsink per module RthCS DC operation °C/W 0.1 Approximate weight to heatsink Mounting torque ± 10 % busbar Case style 0.26 A mounting compound is recommended and the torque should be rechecked after a period of 3 h to allow for the spread of the compound. JEDEC® 75 g 2.7 oz. 4 Nm 3 TO-240AA compatible Revision: 14-Mar-14 Document Number: 94637 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKCS408/060 Vishay Semiconductors 1000 10 000 150 °C 100 TJ = 150 °C 10 TJ = 125 °C TJ = 25 °C 1 0.0 1000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) www.vishay.com 125 °C 100 10 25 °C 1 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 10 20 30 40 50 60 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 100 000 10 000 1000 0 10 20 30 40 50 60 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 1 0.1 D = 0.75 D = 0.5 D = 0.33 D = 0.25 D = 0.2 0.01 0.001 1E-05 Single Pulse (Thermal Resistance) 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 1E+02 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 14-Mar-14 Document Number: 94637 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKCS408/060 Vishay Semiconductors 250 160 Square wave (D = 0.50) 80 % rated VR applied 140 Average Power Loss (W) Allowable Case Temperature (°C) www.vishay.com 120 100 DC 80 60 40 20 200 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 150 RMS limit 100 DC 50 see note (1) 0 0 0 100 200 300 400 0 500 50 100 150 200 250 300 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 100 000 10 000 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (μs) Fig. 7 - Maximum Non-Repetitive Surge Current L D.U.T. IRFP460 Rg = 25 Ω Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Revision: 14-Mar-14 Document Number: 94637 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKCS408/060 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS-VS KC 1 2 S 40 8 3 4 5 / 060 6 1 - VS-VS = Vishay Semiconductors product 2 - Circuit configuration: KC = ADD-A-PAK - 2 diodes/common cathode 3 - S = Schottky diode 4 - Average rating (x 10) 5 - Product silicon identification 6 - Voltage rating (060 = 60 V) CIRCUIT CONFIGURATION (1) + (2) - (3) - LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95369 Revision: 14-Mar-14 Document Number: 94637 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors ADD-A-PAK Generation VII - Diode DIMENSIONS in millimeters (inches) 29 ± 0.5 (1 ± 0.020) 30 ± 0.5 (1.18 ± 0.020) 35 REF. 18 (0.7) REF. 24 ± 0.5 (1 ± 0.020) 6.7 ± 0.3 (0.26 ± 0.012) Viti M5 x 0.8 Screws M5 x 0.8 Document Number: 95369 Revision: 11-Nov-08 7 6 4 5 3 2 1 6.3 ± 0.2 (0.248 ± 0.008) 22.6 ± 0.2 (0.89 ± 0.008) 80 ± 0.3 (3.15 ± 0.012) 15 ± 0.5 (0.59 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 92 ± 0.75 (3.6 ± 0.030) For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000