1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL INSULATOR: PVC COLOR: GREY WITH RED MARKING ON 1ST CONDUCTOR WIDTH: 0.9 MM CONDUCTOR MATERIAL: CU TINNED PITCH: 1.27 MM AWG: 28 NUMBER ON STRAND/CONDUCTOR: 7 / 0,127 mm A ENVIRONMENTAL OPERATING TEMPERATURE: -25 UP TO 105°C FLAME TEST: VW-1 IEC 332-1 UL: 2651 ELECTRICAL CURRENT RATING: 1 A MAX VOLTAGE RATING: 300 V RMS WITHSTANDING VOLTAGE: > 2 KVAC DURING 1 MINUTE INSULATOR RESISTANCE: >100 MOHM / KM SIGNAL DELAY: 4.65 NS/M CONDUCTOR RESISTANCE: 237 OHM / KM MAX CAPACITY UNBALANCED/ 56 pF / M IMPEDANCE UNBALANCED: 90 OHM INDUCTANCE UNBALANCED: 1.45 μH / M B STANDARD c us CERTIFIED: E328849 PACKAGING TAPE & REEL C RoHS Compliant Note: Because of manufacturing matters, our Ribbon flat cable reels might be cut into two pieces. Please note that Würth Elektronik won’t accept any complaint or replacement about that. PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 APPROVAL: GMo UNIT: MM DESCRIPTION: 1.27 MM RIBBON FLAT CABLE SIZE WERI PART NO: 639 1xx 155 21 / 639 1xx 155 21 CAB A4 SCALE: I 01-APR-16 TPK AK H 06-NOV-15 UPDATE AK SHEET: 1/3 REV DATE FILE BY DRAW: AK D 1 2 3 4 5 WE LABEL A 250 FEET / 76.20M REEL FOR 639 1xx 155 21 1 pc = 1 Reel B 1M cable FOR 639 1xx 155 21 CAB 1 pc = 1 Meter of cable pre-cut 2 pcs = 2 x 1 Meter of cable (not 1 x 2 Meter) ... C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: GMo B DESCRIPTION: 1.27 MM RIBBON FLAT CABLE SIZE WERI PART NO: 639 1xx 155 21 / 639 1xx 155 21 CAB A4 SCALE: A REV UNIT: MM SHEET: 2/3 DATE FILE BY DRAW: AK D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D