ESMD - C2HX2 E - Series Surface Mount Mixer 890 - 915 MHz ESMD-C2HX2 SM-2 Features • • • Lo Power +17 dBm Up to +14dBm RF Surface Mount Specifications @ 25°C Frequency Range RF 890-915 MHz LO 819-844 MHz IF 71 MHz Conversion Loss (dB) Typical Minimum 890-915 MHz - Isolation (dB) Typical Function Pin No. 7.5 LO 2 Minimum RF 1 IF 3 Ground 4,5,6 Case Ground - Unconnected - LO To RF 819-844 MHz - 25 LO To IF 15 Operating Characteristics Absolute Maximum Ratings Parameter Absolute Maximum RF Power 50 mW Impedance 50 O Nominal Peak IF Current 40 mA RF Input for 1 dB Compression + 14 dBm Storage Temperature -55°C to 100°C Operating Temperature -55°C to 100°C Pin Temperature (10 seconds) 260°C Note: Specifications subject to change without notice E-Series Surface Mount Mixer 890 - 915 MHz Two Tone Third Order Input Intercept: Test Conditions RF1 890 MHz @ 0 dBm RF2 891 MHz @ 0 dBm LO 820 MHz @ +17 dBm IIP3 Spec: +29 dBm TYPical, +27 dBm Min Voltage Standing Wave Ratio’s LO VSWR Max 2.0:1 RF VSWR Max 1.7:1 IF VSWR Max 2.0:1 Specifications subject to change without notice. n North America: Tel. (800) 366-2266, Fax (800) 618-8883 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. ESMD-C2HX2