NXP low VCEsat load switches PBLS20xD and PBLS60xD Application example A small control (on/off) current (= base TR2) switches a high output (= collector TR1) current TR1 INPUT OUTPUT R1 ON/OFF TR2 R2 006aab611 Load switches with best-in-class current capability and lowest saturation voltage Configuration for new load switch families in SOT457 6 5 4 R2 TR1 Designed to simplify circuit design and reduce pick-and-place costs, these load switches combine an energy-saving low VCEsat transistor with a resistor-equipped transistor (RET) in a single package. They’re housed in SOT457 packages, offer the highest current-per-footprint ratings on the market, and are ideal for switching positive supply rails or ground-referenced loads. TR2 R1 1 2 3 006aab506 Key features } PNP low VCEsat transistor and NPN RET in small SOT457 Modification of pinning compared to existing load switches due to optimized lead frame. SMD package } VCEO of 20 V or 60 V, with four resistor values available } First to offer improved current capability - IC: 1.8 A for 20 V - IC: 1.5 A for 60 V } Highest current per footprint area in loadswitch portfolio : 160 mA/mm² vs. 80-90 mA/mm² } Reduction of VCEsat by ~ 50% vs. last generation Outline drawing and soldering footprint of SOT457 (SC-74) 3.1 2.7 6 3.0 2.5 1.7 1.3 1.1 0.9 5 4 2 3 0.6 0.2 pin 1 index 1 0.95 1.9 Dimensions in mm 0.40 0.25 Key benefits } Space-saving solution } Simplifies circuit design, reduces component count from four to one } Fewer solder points for increased reliability } Reduces pick-and-place costs } Low threshold voltage (<1 V) compared to MOSFET } AEC-Q101 qualified 0.26 0.10 04-11-08 www.nxp.com © 2009 NXP B.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. Date of release: July 2009 The information presented in this document does not form part of any quotation or contract, is believed to be accurate and Document order number : 9397 750 16754 reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Printed in the Netherlands Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Key applications } Supply-line switches } Battery-charger switches } High-side switches for LEDs, drivers, and backlights } Portable equipment Portfolio extension: low VCEsat load switches with improved current capability VCEO SOT457 SC-74 60 PBLS60xD PBLS602xD Higher current Reduced VCEsat PBLS2021D PBLS6021D 20 V, 1.8 A, R1/2 = 2.2 kΩ, SOT457 (SC-74) 60 V, 1.5 A, R1/2 = 2.2 kΩ, SOT457 (SC-74) SOT666 40 SOT363 SC-88 PBLS40xV PBLS40xY SOT457 SC-74 PBLS40xD SOT96 SO8 20 SOT666 15 PBLS20xD PBLS15xV PBLS15xY PBLS202xD PBLSS20xS Higher current Reduced VCEsat 0.5 1 2 IC (A) 3 Selection guide: low VCEsat load switches SOT96 (SO8) PBLS2022D PBLS6022D 20 V, 1.8 A, R1/2 = 4.7 kΩ, SOT457 (SC-74) 60 V, 1.5 A, R1/2 = 4.7 kΩ, SOT457 (SC-74) SOT457 (SC-62) SOT363 (SC-88) SOT666 2.9 x 1.5 x 1.0 2.0 x 1.25 x 0.95 1.6 x 1.2 x 0.55 Package M3D315 Size (mm) 4.9 x 3.9 x 1.75 Ptot (mW) VCEO (V) 15 20 PBLS2023D PBLS6023D 20 V, 1.8 A, R1/2 = 10 kΩ, SOT457 (SC-74) 60 V, 1.5 A, R1/2 = 10 kΩ, SOT457 (SC-74) 20 20 40 60 PBLS2024D PBLS6024D 20 V, 1.8 A, R1/2 = 22 kΩ, SOT457 (SC-74) 60 V, 1.5 A, R1/2 = 22 kΩ, SOT457 (SC-74) 60 1500 IC (A) 0.5 1 1.6 3 1 1 1.3 VCEsat typ (mV); IC = 0.5 A 250 150 70 75 170 180 100 1) 600 2) 300 2) 300 2) R1, R2 (kΩ) 2.2 PBLS1501Y PBLS1501V 4.7 PBLS1502Y PBLS1502V 10 PBLS1503Y PBLS1503V 22 PBLS1504Y PBLS1504V 2.2 PBLS2001D 4.7 PBLS2002D 10 PBLS2003D 22 PBLS2004D 2.2 PBLS2021D 4.7 PBLS2022D 10 PBLS2023D 22 PBLS2024D 2.2 PBLS2001S 4.7 PBLS2002S 10 PBLS2003S 2.2 PBLS4001D 4.7 PBLS4002D 10 PBLS4003D 22 PBLS4004D 47 PBLS4005D 2.2 PBLS6001D 4.7 PBLS6002D 10 PBLS6003D 22 PBLS6004D 47 PBLS6005D 2.2 PBLS6021D 4.7 PBLS6022D 10 PBLS6023D 22 PBLS6024D Device mounted on a ceramic PCB, Al2O3, standard footprint Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint Types in bold blue represent new products and are included as samples 1) 1)