1 2 3 4 5 MATERIAL: HOUSING MATERIAL: LCP COLOR: IVORY ACTUATOR MATERIAL: LCP COLOR: BLACK CONTACT MATERIAL: PHOSPOR BRONZE CONTACT PLATING: 100µ’’ TIN OVER 50µ’’ NI QUALITY CLASS: 25 MATING CYCLES* A ENVIRONNEMENTAL: OPERATING TEMPERATURE: -25°C UP TO 85°C FLAMABILITY RATING: UL94-V0 COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL: CURRENT RATING: 0.5A WORKING VOLTAGE: 50V INSULATION RESISTANCE: >100MOHM DIELECTRIC WITHSTANDING VOLT.: 250VAC/MN CONTACT RESISTANCE: 20mOHM MAX STANDARD CERTIFIED: E323964 FOLLOWED BY 1, FOLLOWED BY 04 THRU 50, FOLLOWED BY 140 OR 145, FOLLOWED BY NUMERIC DIGITS B SOLDERING: REFLOW PROCESS ONLY DIMENSION: B = 0.5 x NB PINS + 6.4 C = 0.5 x (NB PINS - 1) D = 0.5 x (NB PINS + 1) + 0.1 E = 0.5 x (NB PINS + 1) RECOMMENDED PCB LAYOUT - COMPONENT VIEW C APPLICABLE FFC LAYOUT RoHS Compliant *NOTE: theoretical value related to the Tin plating; however, due to the sensitive actuator, we recommend not to make more than 1 or 2 cycles in order to maintain acceptable mechanical & electrical conditions PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 K 25-JAN-16 TPK UPDATE AK J 01-JUN-15 TPK UPDATE QL I 13-DEC-13 TPK UPDATE QL SCALE: DESCRIPTION: 0.5MM ZIF FPC HORIZONTAL BOTTOM CONTACT TYPE TAPE & REEL PACKAGING H 23-JAN-13 UNIT µ => µ’’ QL SHEET: 1/3 WERI PART NO: 6871 xx 14522 REV DATE FILE BY DRAW: QL APPROVAL: GMo UNIT: MM SIZE A4 D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: GMo B A REV DATE FILE BY SCALE: DESCRIPTION: 0.5MM ZIF FPC HORIZONTAL BOTTOM CONTACT TYPE TAPE & REEL PACKAGING SHEET: 2/3 WERI PART NO: 6871 xx 14522 UNIT: MM DRAW: QL SIZE A4 D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D 1 1 2 2 Pull the actuator upwards in the open position Insert the FFC cable vertically until the conductor almost disappears A B 1 2 Press actuator in the middle to make there is no gap and the actuator is locked Press both ends of the actuator A Pull the actuator as horizontally as possible by a proper force Do not pull the actuator too far otherwise the stop limit (hook on actuator) may be broken B Do not keep FFC inclined when insertion Don’t keep conductor toward actuator