GPA801 - GPA807 Taiwan Semiconductor CREAT BY ART 8A, 50V - 1000V Glass Passivated Rectifiers FEATURES C - Glass passivated chip junction - High efficiency, Low VF - High current capability - High reliability - High surge current capability - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC 1 2 - Halogen-free according to IEC 61249-2-21 TO-220AC MECHANICAL DATA Case: TO-220AC Molding compound: UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: As marked Weight: 1.8 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL GPA GPA GPA GPA GPA GPA GPA 801 802 803 804 805 806 807 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current IF(AV) 8 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A VF 1.1 V Maximum instantaneous forward voltage (Note 1) IF=8 A Maximum reverse current @ rated VR TJ=25°C TJ=125°C Typical junction capacitance (Note 2) Typical thermal resistance Operating junction temperature range Storage temperature range IR 5 100 μA CJ 50 pF RθJA 2.5 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Measured at 1 MHz and applied reverse voltage of 4.0V DC. Version: F1511 GPA801 - GPA807 Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. SUFFIX GPA80x (Note 1) PACKING CODE PACKING CODE H (*) SUFFIX C0 PACKAGE PACKING TO-220AC 50 / Tube G Note 1: "x" defines voltage from 50V (GPA801) to 1000V (GPA807) *: Optional available EXAMPLE EXAMPLE P/N PART NO. GPA807HC0G GPA807 PART NO. PACKING CODE PACKING CODE SUFFIX H DESCRIPTION SUFFIX C0 AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 MAXMUM FORWARD CURRENT DERATING CURVE FIG. 2 TYPICAL REVERSE CHARACTERISTICS AVERAGE FORWARD CURRENT(A) 8 6 4 Resistive of inductive load with heat sink 2 0 0 50 100 150 INSTANTANEOUS REVERSE CURRENT (μA) 100 10 10 TJ=125°C 1 TJ=25°C 0.1 0 CASE TEMPERATURE(°C) 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 4 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT (A) 175 PEAK FORWARD SURGE CURRENT (A) 20 150 8.3ms single half sine wave 125 100 75 50 25 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 10 1 Pulse width=300us 1% duty cycle 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 2 FORWARD VOLTAGE (V) Version: F1511 GPA801 - GPA807 Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 120 100 80 60 40 20 0 0.1 1 10 100 1000 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS TO-220AC DIM. Unit (mm) Unit (inch) Min Max Min Max A - 10.50 - 0.413 B 2.62 3.44 0.103 0.135 C 2.80 4.20 0.110 0.165 D 0.68 0.94 0.027 0.037 E 3.54 4.00 0.139 0.157 F 14.60 16.00 0.575 0.630 G 0.00 1.60 0.000 0.063 H 13.19 14.79 0.519 0.582 I 4.95 5.20 0.195 0.205 J 4.42 4.76 0.174 0.187 K 1.14 1.40 0.045 0.055 L 5.84 6.86 0.230 0.270 M 2.20 2.80 0.087 0.110 N 0.35 0.64 0.014 0.025 MARKING DIAGRAM P/N = Marking Code G = Green Compound YWW = Date Code F = Factory Code Version: F1511 GPA801 - GPA807 Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Version: F1511