TS79L00_G15.pdf

TS79L00 Series
3-Terminal 100mA Negative Voltage Regulator
TO-92
SOT-89
Pin Definition:
1. Ground
2. Input
3. Output
General Description
The TS79L00 Series of negative voltage regulators are inexpensive, easy-to-use devices suitable for a multitude
of applications that require a regulated supply of up to 100mA. Like their higher power TS7900 and TS79M00
Series cousins, these regulators feature internal current limiting and thermal shutdown making them remarkably
rugged. No external components are required with the TS79L00 devices in many applications.
These devices offer a substantial performance advantage over the traditional zener diode-resistor combination, as
output impedance and quiescent current are substantially reduced.
Features
Standard Application Circuit
●
Output Voltage Range -5V, -9V
●
Output current up to 100mA
●
Internal thermal overload protection
●
Internal short-circuit current limiting
●
Output transistor safe-area compensation
●
Output voltage offered in 4% tolerance
Ordering Information
Part No.
Package
A common ground is required between the input and the
output voltages. The input voltage must remain typically
2.0V above the output voltage even during the low point on
the Input ripple voltage.
XX = these two digits of the type number indicate voltage.
* = Cin is required if regulator is located an appreciable
distance from power supply filter.
** = Co is not needed for stability; however, it does improve
transient response.
Packing
TS79LxxCT B0G
TO-92
1Kpcs / Bulk
TS79LxxCT A3G
TO-92
2kpcs / Ammo
1kpcs / 7” Reel
TS79LxxCY RMG
SOT-89
Note: Refer to detail ordering information table.
“G” denotes for Halogen Free
Absolute Maximum Ratings (Ta = 25°C unless otherwise noted)
Parameter
Input Voltage
Power Dissipation
Operating Temperature range
Junction Temperature
Storage Temperature Range
Thermal Resistance - Junction to Case
Thermal Resistance - Junction to Ambient
TO-92
SOT-89
TO-92
SOT-89
Symbol
Limit
Unit
VIN
PD
TOPR
TJ
TSTG
-35
Internal Limited
0~+125
+150
-65~+150
-18
210
--
V
W
°C
°C
°C
RӨJC
RӨJA
°C/W
°C/W
2
Note: * Considering 6cm of copper board heat-sink
Document Number: DS_P0000265
1
Version: G15
TS79L00 Series
3-Terminal 100mA Negative Voltage Regulator
TS79L05 Electrical Characteristics
(VIN=-10V, IOUT=40mA, 0°C≤TJ≤125°C, CIN=0.33uF, COUT=0.1uF; unless otherwise specified.)
Parameter
Symbol
Output voltage
VOUT
Line Regulation
REGLINE
Load Regulation
REGLOAD
Quiescent Current
IQ
Quiescent Current Change
∆IQ
Output Noise Voltage
Ripple Rejection Ratio
Voltage Drop
Peak Output Current
Temperature Coefficient of
Output Voltage
VN
RR
VDROP
Io peak
∆VOUT/ ∆TJ
Test Condition
Min
Typ
Max
TJ=25°C
-4.80
-5
-5.20
-7.5V≤Vin≤-20V,
5mA≤IOUT≤100mA
-4.75
-5
-5.25
--
50
150
5mA≤IOUT≤100mA
TJ=25°C
5mA≤IOUT≤40mA
IOUT=0, TJ=25°C
-7.5V≤Vin≤-25V
5mA≤IOUT≤40mA
10Hz≤f≤100KHz, TJ=25°C
f=120Hz, -8V≤Vin≤-18V
IOUT=100mA, TJ=25°C
TJ=25°C
------41
---
20
10
3
--40
49
1.7
0.15
60
30
6
1.5
0.1
-----
IOUT=5mA, 0°C≤TJ≤125°C
--
-0.65
--
mV/°C
Unit
TJ=25°C
-7.5V≤Vin≤-20V
Unit
V
mV
mA
µV
dB
V
A
TS79L09 Electrical Characteristics
(VIN=-15V, IOUT=40mA, 0°C≤TJ≤125°C, CIN=0.33uF, COUT=0.1uF; unless otherwise specified.)
Parameter
Symbol
Output voltage
VOUT
Line Regulation
REGLINE
Load Regulation
REGLOAD
Quiescent Current
Quiescent Current Change
IQ
∆IQ
Test Condition
Min
Typ
Max
TJ=25°C
-8.65
-9
-9.36
-11.5V≤Vin≤-24V,
5mA≤IOUT≤100mA
-8.57
-9
-9.45
--
90
180
------37
---
30
15
3
--60
57
1.7
0.15
90
45
6
1.5
0.1
-----
TJ=25°C
-11.5V≤Vin≤-24V
5mA≤IOUT≤100mA
5mA≤IOUT≤40mA
IOUT=0, TJ=25°C
-11V≤Vin≤-23V
5mA≤IOUT≤40mA
10Hz≤f≤100KHz, TJ=25°C
f=120Hz, =13V≤Vin≤=24V
IOUT=100mA, TJ=25°C
TJ=25°C
TJ=25°C
V
mV
mA
Output Noise Voltage
VN
µV
Ripple Rejection Ratio
RR
dB
Voltage Drop
VDROP
V
Peak Output Current
Io peak
A
Temperature Coefficient of
∆VOUT/ ∆TJ IOUT=5mA, 0°C≤TJ≤125°C
--0.9
-mV/°C
Output Voltage
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as
possible, and thermal effects must be taken into account separately.
This specification applies only for DC power dissipation permitted by absolute maximum ratings.
Document Number: DS_P0000265
2
Version: G15
TS79L00 Series
3-Terminal 100mA Negative Voltage Regulator
Ordering information
Voltage
5V
9V
TO-92
TS79L05CT B0G
TS79L05CT A3G
TS79L09CT B0G
TS79L09CT A3G
SOT-89
TS79L05CY RMG
Packing code information
Packing
B0: 1kpcs / Bulk
A3: 2kcs / Ammo
Document Number: DS_P0000265
1kpcs / 7" Reel
3
Version: G15
TS79L00 Series
3-Terminal 100mA Negative Voltage Regulator
TO-92 Mechanical Drawing
Unit: Millimeters
Marking Diagram
XX = Output Voltage
(05=-5V, 09=-9V)
Y = Year Code
M = Month Code for Halogen Free Product
O =Jan
P =Feb Q =Mar
R =Apr
S =May
T =Jun U =Jul
V =Aug
W =Sep
X =Oct Y =Nov
Z =Dec
L = Lot Code
Document Number: DS_P0000265
4
Version: G15
TS79L00 Series
3-Terminal 100mA Negative Voltage Regulator
SOT-89 Mechanical Drawing
Unit: Millimeters
Marking Diagram
XX = Output Voltage
(05=-5V)
Y = Year Code
M = Month Code for Halogen Free Product
O =Jan
P =Feb Q =Mar
R =Apr
S =May
T =Jun U =Jul
V =Aug
W =Sep
X =Oct Y =Nov
Z =Dec
L = Lot Code
Document Number: DS_P0000265
5
Version: G15
TS79L00 Series
3-Terminal 100mA Negative Voltage Regulator
TO-92 Ammo Pack Specification
TO-92 Tape Leader and Trailer
TO-92 Tape Dimension
Item Description
Base of Package to Lead Bend
Symbol
b
Dimension
3.0 (typ.)
Component Height
Ha
23.57 (typ.)
Lead Clinch Height
H0
16.0 ±0.5
Component Base Height
H1
19.0 ±0.5
Component Top to Lead Bend
H2
8.0 (max)
Component Alignment (side / side)
Pd
1.02 (max)
Component Alignment (front / back)
Hd
0.79 (max)
Feed Hole Pitch
P0
12.7 ±0.3
Hole Center to Component Center
P1
6.25 ±0.4
Lead Spread
F1
2.5 ±0.3
Lead Thickness
d
0.46 (typ.)
Cut Lead Length
L
10.9 (max)
Taped Lead Length
L1
5.31 (typ.)
Taped Lead Thickness
t
0.81 ±0.2
Carrier Tape Thickness
t1
0.5 ±0.2
Carrier Tape Width
W
18.0 ±0.5
Hold – down Tape Width
W0
0.5 ±0.2
Hold – down Tape position
W1
9.0 ±0.7
Feed Hole Position
W2
6.0 ±0.2
Sprocket Hole Diameter
D0
4.0 ±0.2
Lead Spring Out
S
0.1 (max)
Note: All dimensions are in millimeter.
Document Number: DS_P0000265
6
Version: G15
TS79L00 Series
3-Terminal 100mA Negative Voltage Regulator
Notice
Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,
assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, to
any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of
sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty,
relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify TSC for any damages resulting from such improper use or sale.
Document Number: DS_P0000265
7
Version: G15