Model MDP-S Double Banana Plug with Shorting Bar, Stackable Model MDP-S Double Banana Plug with Shorting Bar, Stackable Features Specifications • Operating Voltage: Hands free usage in controlled voltage environments: 5000 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. Operating Temperature: +50°C (+122°F) Max. Current: 15 Amperes • • Banana plugs are internally shorted with #18 AWG wire. Banana plugs can be vertically and horizontally stacked for test versatility. Banana plug springs are Nickel Plated, Beryllium Copper for long insertion cycle life. Materials Banana Jacks: Banana Plugs: Body: Spring: Insulation: Marking: USA: Brass, Nickel Plated Brass, Nickel Plated Beryllium Copper, Nickel Plated Polypropylene “MDP-S, POMONA ELECTRONICS CO, INC. POMONA CALIFORNIA” “SHORTING BAR” Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com Ordering Information Model: MDP-S-Color Colors = 0 (Black), 2 (Red), 9 (White) Ordering Example: MDP-S-2 (Double Banana Plug with Red insulation) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2010 D1095101 Rev. 100 Page 1 of 1