Model 4933 Do-It-Yourself In-Line Sheathed Banana Plug Model # 4933 Dimension "A" .062" (1.57mm) Dimension "B" .160" (4.06mm) Accepts Wire AWG 18, 20, 22 Features • • • Threaded two piece design allows wires to be soldered or crimped to the banana plug. Banana plug spring is nickel plated Beryllium Copper for long insertion life. Fits into Pomona model 4934 Banana Jack. Materials Banana Plug: Body – Brass, Nickel Plated Spring – Beryllium Copper, Nickel Plated Insulation: Polypropylene, color per part number Threaded Handle: Polypropylene, color per part number Marking: “POMONA ELECT.” & part number Ratings Operating Voltage: Hands free usage in controlled voltage environments: 1200 Vrms Max. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. Operating Temperature: +80°C (+176°F) Current: 15 Amperes Max. Ordering Information Model: 4933-Color Colors = -0 (Black), -2 (Red) Ordering Example: 4933-0 (Banana Plug with Black insulation) USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2010 D1094280 Rev. 100 Page 1 of 1