Model 5090 BNC (F) to 2 Lug Triaxial (M) Adapter Model 5090 BNC (F) to 2 Lug Triaxial (M) Adapter Features Provides an easy interface between a BNC (F) and a 2 Lug Triax (M). Materials Body: Dielectric: Center Contact: Outer Contact: Marking: Brass, Tarnish Resistant Nickel Plated PTFE per L-P-403 Male – Brass, Gold Plated Female – Beryllium Copper, Gold Plated Beryllium Copper, Tarnish Resistant “POMONA 5090” (optional) Ratings Voltage: For CE compliance and for personal safety, do not hold in hand when voltages exceed 30 Vrms/60 Vdc. Maximum voltage for hands free use in controlled testing environments: 500 Vdc Do not use on circuits where transient stresses can exceed the rated voltage. Frequency Range: DC to 500 MHz Ordering Information Model: 5090 BNC (F)/2 LUG TRIAXIAL (M) USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2012 D1094198 Rev. 101 Page 1 of 1