4211 S.E. International Way, Suite F Milwaukie, OR 97222, USA Northwest Power, Inc. The DC MegaPAC™ The DC MegaPAC DC-DC Switcher (formerly manufactured by Westcor, a Division of Vicor) allows users to instantly configure high efficiency power supplies. A complete power supply is configured by selecting and inserting up to eight slide-in output assemblies called ModuPACs. ModuPACs incorporate one or two Vicor DC-DC converters and are available in a wide array of outputs and power levels. If output requirements change, the user can simply unlock a single screw and replace the slide-in ModuPAC assembly with one that has the desired rating. 3.4 X 6.0 X 12.0 in. 304.8 x 152.4 x 86.36 mm Standard Features n DC Input: 12, 24, 36, 48 or 72 Vdc available n Output Power: 1 – 16 outputs, 1,600 W Full power to 45°C Half power to 65°C n Weight: 9.25 lbs. Fully configured n Type of Cooling: Fan-cooled n Other Features > So start for limiting inrush current > Conducted EMI meets BTR 2511 > Remote Sense capability > Output over-current protection on all outputs > Output over-voltage protection on most outputs > Output over-temperature protection on all outputs > Input over, under and reverse voltage protection > Box-to-box paralleling capability > Input temperature monitor, warning and shut down > CE Mark Rev 2.0 vicorpower.com 12/2015