0,3 A 12,5 1 0,2 2 3 10,8 M3 #4-40 0,1 0,2 0,8 6,2 M3 oder/ or l = 3.7/5.6/6.0/6.3/9.0 +0,2 Zubehör / Refer to table on page 2 Logo : max 1,5 9.0 mm 201=0.8µm (30 µin) Au CONTACT, GOLD/LEAD TERMINAL ERNI Refer to table on page 2 Special : Refer to table on page 2 for press-fit contact drawing 114110 für Einpressbolzen Zeichnung 114109 / Information: Class : metal plating of plated-through hole für Einpresskontakt Zeichnung 114110 / 3WK3 Accessory : Sonderausführung / Schichtaufbau im metallisierten Loch / Pressfit for press-fit bolt drawing 114109 Tolerances 2:1 Scale All Dimensions in mm Consider protection memo from DIN 34 Aufdruck / 3,9 0,2 Terminal Length : Anforderungsstufe / Gehäuse genietet riveted housing : +0,2 Terminal Type : Type : l 8,3 A3 A2 No. of contacts : Anschlußlänge / Nietmutter mit Klemmteil clamping thread : Refer to table on page 2 Part No. : Anschlußart / riveted nut : 9 +0,13 +0,3 5,8 0,2 10,8 (5.9) Nietmutter / 9 6,4 054116 A1 Ident-Nr. / (min. 2.5) 9 114161 33,3 3,2 min. 3 min. 4,5 3,05 +0,1 8,8 -0,3 13,72 25,1 Bauart / standoff : 3,2 054116 Polzahl / Abstandshülse / Einpressbolzen / Gewindehülse press-fit bolt / threaded sleeve : 3,2 A Einpressbolzen press-fit bolt : M3 oder/ or 0,3 #4-40 27,5 cross section A-A Schnitt A-A / M3 oder/ or 0,3 #4-40 39,1 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date TMC-P 3W3-EP-9.0-COD2-3 TMC-P 3W3-EP-9.0-COD2-3 www.ERNI.com Index Designation M:00021133.SZN 054942 TMCP I Ordering Information D-Sub Connector High Power Pressfit Vertical Male Assembly Height 9 mm Number of Pins 3WK3 Accessory Termination Side: Pressfit bolt #4-40 123161 Accessory Termination Side: Pressfit bolt M3 124184 Accessory Mating Side: Threaded sleeve M3 Accessory Termination Side: Pressfit bolt 134502 Accessory Mating Side: Threaded sleeve #4-40 134503 Ordering Information press-in tools Number of Pins 3WK3 Upper Tool with Quick Change Device Lower Tool 220504 220147 www.erni.com Accessory Termination Side: Pressfit bolt