Schnitt A-A / 0,2 0,3 10,8 12,5 l =3,7/5,6/6,0/6,3 M3 oder/ or 0,86 Nietmutter / press-fit bolt / threaded sleeve : 3,2 41,3 53 0,3 3,2 min. 3 min. 4.5 l (min. 2.5) 6,3 6,4 6,3 0,3 riveted nut : #4-40 M3 oder/ or 5,94 Einpressbolzen / Gewindehülse press-fit bolt : M3 oder/ or 7,67 Einpressbolzen #4-40 14,48 #4-40 14,48 cross section A-A (5.9) Abstandshülse / standoff : +0,13 Nietmutter mit Klemmteil M3 3,2 114181 8 -0,2 124643 3,9 6,3 -0,3 Gehäuse genietet riveted housing : 3,05 clamping thread : max 1,5 6,3 6,2 38,5 -0,2 47 Polzahl / Part No. : Refer to table on page 2 No. of contacts : Anschlußart / Anschlußlänge / Terminal Length : Bauart / 5W5 Anforderungsstufe / Aufdruck / Zubehör / Logo : Sonderausführung / for press-fit contact drawing 114110 für Einpressbolzen Zeichnung 114109 / for press-fit bolt drawing 114109 6.3 mm 201=0.8µm (30 µin) Au CONTACT, GOLD/LEAD TERMINAL ERNI Accessory : Refer to table on page 2 Special : metal plating of plated-through hole für Einpresskontakt Zeichnung 114110 / Information: Class : Board hole pattern 144059 Schichtaufbau im metallisierten Loch / Pressfit Terminal Type : Type : Leiterplattenbohrbild 144059 / Refer to table on page 2 Refer to table on page 2 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / 0,2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date TMC-S 5W5-EP36-6,3-5 TMC-S 5W5-EP36-6,3-5 www.ERNI.com Index Designation M:00022979.SZN 054990 TMCS I Ordering Information D-Sub Connector High Power Pressfit Vertical Female Assembly height 6.3mm Number of Pins 5W5 Accessory Termination Side: Pressfit bolt M3 134458 Accessory Termination Side: Pressfit bolt #4-40 134459 Accessory Mating Side: Threaded sleeve M3 Accessory Termination Side: Pressfit bolt 134514 Accessory Mating Side: Threaded sleeve #4-40 134515 Ordering Information press-in tools Number of Pins 5W5 Upper Tool with Quick Change Device Lower Tool 220282 220147 www.erni.com Accessory Termination Side: Pressfit bolt