Product is End of Life Mar-2016 and Replaced by SM-5 CP002M www.vishay.com Vishay Dale Wirewound Resistors, Commercial Power, Surface Mount FEATURES • High wattage in a SMD package • Meets or performs better than EIA-RS-344 requirements • Special inorganic potting compound and ceramic case provide high thermal conductivity in a fireproof package • Superior surge capability • Direct mounting on printed circuit board Please reference the Vishay Dale closest equivalent: SM-5 (www.vishay.com/doc?31812). Notes • There may be slight differences between the CP002M product and the SM-5 product. • See the cross-reference file for a complete list of differences and part number crosses: www.vishay.net/files/Cross-Reference%20Data%20-%20PTN-DR-018-2015%20Rev%200.pdf. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P40 °C W RESISTANCE RANGE Ω TOLERANCE ±% WEIGHT (typical) g CP002M CP-2M 4 0.1 to 2.74K 1, 3, 5, 10 1.6 TECHNICAL SPECIFICATIONS PARAMETER Temperature Coefficient UNIT CP002M RESISTOR CHARACTERISTICS ppm/°C ± 50 1.0 Ω and above, ± 90 below 1.0 Ω Short Time Overload - See Performance table VAC 1000 Maximum Working Voltage V (P x R)1/2 Operating Temperature Range °C -65 to +175 Dielectric Withstanding Voltage PART NUMBER AND PRODUCT DESCRIPTION Global Part Number example: CP002M15R00JB37 C P 0 0 2 M 1 5 R 0 0 J B 3 7 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL CP002M R = decimal K = thousand R1500 = 0.15 Ω 1K500 = 1.5 kΩ F = ± 1.0 % H = ± 3.0 % J = ± 5.0 % K = ± 10 % B37 = tin/lead, bulk P07 =tin/lead, tube (dash number) (up to 3 digits) from 1 to 999 as applicable Historical Part Numbering example: CP-2M 15 Ω 5 % B37 CP-2M 15 Ω 5% B37 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Revision: 08-Jan-16 Document Number: 30105 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Product is End of Life Mar-2016 and Replaced by SM-5 CP002M www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] DIMENSIONS in inches [millimeters] L MODEL W W1 H W H1 T L ± 0.032 ± 0.032 ± 0.032 ± 0.010 ± 0.032 ± 0.010 [0.813] [0.813] [0.813] [0.254] [0.813] [0.254] H1 H CP002M T MODEL W1 I 0.712 [18.08] 0.170 [4.32] 0.250 [6.35] 0.100 [2.54] a b l 0.280 [7.11] 0.200 [5.08] 0.460 [11.68] b CP002M DERATING 200 Rated Power in % Temperature Rise in °C 0.262 [6.65] SOLDER PAD DIMENSIONS in inches [millimeters] a TEMPERATURE RISE 0.250 [6.35] Hot Spot 150 100 120 100 80 60 Terminal Temperature 40 50 20 0 0 1.0 2.0 3.0 0 - 65 - 50 4.0 Power in W - 25 0 25 50 40 75 100 125 150 175 Ambient Temperature in °C MATERIAL SPECIFICATIONS Element: copper-nickel alloy or nickel-chrome alloy depending on resistance value Core: alumina ceramic Terminals: high temperature solder dipped copper Part Marking: DALE, model, wattage, value, tolerance, date code Body: steatite ceramic case with inorganic potting compound PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal Shock -55 °C to +150 °C, 5 cycles, 15 min at each extreme ± (0.2 % + 0.05 Ω) ΔR Short Time Overload 3.5 x rated power for 5 s 5 x rated power for 5 s ± (0.5 % + 0.05 Ω) ΔR ± (4.0 % + 0.05 Ω) ΔR Low Temperature Storage -65 °C for 24 h ± (0.2 % + 0.05 Ω) ΔR High Temperature Condition 1000 h at +175 °C ± (0.5 % + 0.05 Ω) ΔR Insulation Resistance MIL-STD-202, method 302, 100 V Mechanical Shock 100 g’s for 11 ms, 5 pulses ± (0.1 % + 0.05 Ω) ΔR Vibration Frequency varied 10 Hz to 500 Hz in one min, 3 directions, 9 h ± (0.1 % + 0.05 Ω) ΔR 1000 MΩ min. Load Life 1000 h at rated power, +40 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 % + 0.05 Ω) ΔR Resistance to Solder Heat +260 °C solder, 10 s to 12 s dwell, 25 mm/s emergence ± (0.5 % + 0.05 Ω) ΔR Bias Humidity +85 °C, 85 % RH, 10 % bias, 1000 h ± (1.0 % + 0.05 Ω) ΔR Revision: 08-Jan-16 Document Number: 30105 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000