CP Quick Connect Datasheet

Product is End of Life Apr-2016 and Replaced by PC Quick Connect
CP Quick Connect
www.vishay.com
Vishay Dale
Wirewound Resistors, Commercial High Power,
Quick Connect Terminals
FEATURES
• Can be purchased with or without brackets
installed
• Quick connect terminals
• High power ratings
• Special inorganic potting compound and
ceramic case provide high thermal conductivity
in a fireproof package
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Please reference the Vishay Dale closest equivalent:
PC Quick Connect (www.vishay.com/doc?31826).
APPLICATIONS
Notes
• There may be slight differences between the CP Quick Connect
product and the PC Quick Connect product.
• See the cross-reference file for a complete list of differences and
part number crosses:
www.vishay.net/files/Cross-Reference%20Data%20-%20PTNDR-021-2015%20Rev%200.pdf.
The CP resistors are suited for use in high ambient
temperatures and also where ease of mounting and
electrical connections are to be made with quick connect
terminals. Model CP0050 is particularly recommended for
automotive electronic ignition ballast, appliance and motor
ballasts and two-speed fans.
STANDARD ELECTRICAL SPECIFICATIONS
HISTORICAL
MODEL
POWER RATING
P40 °C
W
RESISTANCE
RANGE

TOLERANCE
±%
WEIGHT
(typical)
g
CP015B
CP-15B
15
0.1 to 288
5, 10
21.5
CP020B
CP-20B
20
0.1 to 460
5, 10
27.5
CP-26B (1)
25
0.12 to 570
5, 10
44.0
GLOBAL
MODEL
CP026B (1)
CP26SM
CP-26SM
25
0.12 to 570
5, 10
56.9
CP050B (1)
CP-50B (1)
50
0.16 to 740
5, 10
90.0
CP-50B-1 (1)
50
0.16 to 740
5, 10
90.0
CP050B...1 (1)
Note
(1) To order the CP026B, CP050B and CP050B...1 without brackets, remove the B from model number (CP0026, CP0050 and CP0050...1).
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CP QUICK CONNECT CHARACTERISTICS
ppm/°C
± 300 for 1.0  and above; ± 600 below 1.0 
-
10 x rated power for 5 s
Operating Temperature Range
°C
-65 to +275
Dielectric Withstanding Voltage
VAC
1000
V
(P x R)1/2
Temperature Coefficient
Short Time Overload
Maximum Working Voltage
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CP050B15R00JB141
C
P
0
5
0
B
1
5
R
0
0
J
B
1
4
1
GLOBAL MODEL
VALUE
TOLERANCE
PACKAGING
SPECIAL
(see Standard Electrical
Specifications Global
Model column for
options)
R = decimal
K = thousand
R1500 = 0.15 
1K500 = 1500 
H = ± 3.0 %
J = ± 5.0 %
K = ± 10.0 %
B14 = lead (Pb)-free,
bulk
B31 = lead (Pb)-free,
four layer bulk
(dash number)
(up to 3 digits)
from 1 to 999
as applicable
Historical Part Numbering example: CP-50B-1 15  5 % B14
CP-50B-1
15 
5%
B14
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
Revision: 15-Feb-16
Document Number: 30233
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Product is End of Life Apr-2016 and Replaced by PC Quick Connect
CP Quick Connect
www.vishay.com
Vishay Dale
DIMENSIONS in inches [millimeters]
Quick connect terminal connections 0.250 [6.35]
0.245 ± 0.010
[6.22 ± 0.254]
0.290 ± 0.010
[7.37 ± 0.254]
0.082 ± 0.010
[2.08 ± 0.254]
0.280 ± 0.010
[7.11 ± 0.254]
0.130 ± 0.005
[3.30 ± 0.127]
0.032 [0.813] thick
MODEL CP015B
1.29 ± 0.050
[32.77 ± 1.27]
1.888 ± 0.040
[47.96 ± 1.02]
0.500 ± 0.040
[12.70 ± 1.02]
0.500 ± 0.040
[12.70 ± 1.02]
0.660 ± 0.015
[16.76 ± 0.381]
0.250 [6.35]
Quick connect terminal
(See detail for dimensions}
Ø 0.156 ± 0.015
[3.96 ± 0.381]
0.312 ± 0.015
[7.92 ± 0.381]
0.165 ± 0.015
[4.19 ± 0.381]
MODEL CP020B
1.89 ± 0.050
[48.01 ± 1.27]
2.50 ± 0.040
[63.50 ± 1.02]
0.500 ± 0.040
[12.70 ± 1.02]
0.500 ± 0.040
[12.70 ± 1.02]
0.660 ± 0.015
[16.76 ± 0.381]
0.165 ± 0.015
[4.19 ± 3.81]
0.250 [6.35]
Quick connect terminal
(See detail for dimensions}
Ø 0.156 ± 0.015
[3.96 ± 0.381]
0.312 ± 0.015
[7.92 ± 0.381]
MODEL CP0026 AND CP026B
3.06 ± 0.062 [77.72 ± 1.57]
2.28 ± 0.025
[57.91 ± 0.635]
1.28 ± 0.040
[32.51 ± 1.02]
0.560 ± 0.040
[14.22 ± 1.02]
24.64 ± 1.02
[0.970 ± 0.040]
0.032 ± 0.003
[0.813 ± 0.076]
0.250 [6.35]
Quick connect terminal
(See detail
for dimensions)
0.495 ± 0.040
[12.57 ± 1.02]
0.580 ± 0.040
[14.73 ± 1.02]
1.00 ± 0.015
[25.4 ± 0.381]
Ø 0.340 ± 0.015
[8.64 ± 0.381]
Revision: 15-Feb-16
Document Number: 30233
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Product is End of Life Apr-2016 and Replaced by PC Quick Connect
CP Quick Connect
www.vishay.com
Vishay Dale
MODEL CP26SM
2.28 ± 0.030
[57.91 ± 0.762]
3.09 ± 0.062
[78.49 ± 1.57]
1.055 ± 0.040
[26.80 ± 1.02]
Ø 0.320 ± 0.015
[8.13 ± 0.381]
0.600 ± 0.040
[15.24 ± 1.02]
.
0.600 ± 0.040
[15.24 ± 1.02]
0.032
[0.813]
0.250 [6.35]
Quick
connect terminal
(See detail for
dimensions)
0.100 ± 0.015
[2.54 ± 0.381]
MODEL CP0050 AND CP050B
2.875 ± 0.025
[73.03 ± 0.635]
3.61 ± 0.040 [91.69 ± 1.02]
1.50 ± 0.020
[38.10 ± 0.508]
0.250 ± 0.040
[6.35 ± 1.02]
0.750 ± 0.040
[19.05 ± 1.02]
Ø 0.125
[3.18]
Ø 0.343
[8.71]
0.422 ± 0.040
[10.72 ± 1.02]
0.750 ± 0.040
[19.05 ± 1.02]
1.099 ± 0.020
0.828 ± 0.020 [27.91 ± 0.508]
[21.03 ± 0.508]
0.250 [6.35]
Quick connect terminal
(See detail for dimensions)
0.377 [9.58]
MODEL CP0050...1 AND CP050B...1
3.60 ± 0.040
[91.44 ± 1.02]
0.750 ± 0.010
[19.05 ± 0.254]
0.750 ± 0.030
[19.05 ± 0.762]
Ø 0.130
[3.30]
0.250 [6.35]
Quick connect terminal
(See detail for dimensions)
3.04 ± 0.030
[77.22 ± 0.762]
0.400 ± 0.030
[10.16 ± 0.762]
0.775 ± 0.030
[19.69 ± 0.762]
0.925 ± 0.030
[23.50 ± 0.762]
Ø 0.215
[5.46]
0.250 ± 0.030
[6.35 ± 0.762]
Revision: 15-Feb-16
Document Number: 30233
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Product is End of Life Apr-2016 and Replaced by PC Quick Connect
CP Quick Connect
www.vishay.com
Vishay Dale
DERATING
300
RATED POWER IN %
TEMPERATURE RISE IN °C
TEMPERATURE RISE
250
CP020B
200
150
120
100
80
60
CP050B
100
40
50
20
0
0
10
20
30
40
50
POWER IN W
0
- 65
50
25
75
40
125
175
225
275
AMBIENT TEMPERATURE IN °C
MATERIAL SPECIFICATIONS
Element: copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
Core: woven fiberglass
Body: steatite ceramic case with inorganic potting
compound
Terminals: bare brass
Bracket: aluminum
Part Marking: DALE, model, wattage, value, tolerance, date
code
PERFORMANCE
TEST
CONDITIONS OF TEST
TEST LIMITS (EIA RS-344)
Thermal Shock
-55 °C to +275 °C, 5 cycles, 30 min dwell time
± (5.0 % + 0.05 ) R
Short Time Overload
10 x rated power for 5 s
± (4.0 % + 0.05 ) R
Dielectric Withstanding Voltage
1000 VRMS for 1 min
± (2.0 % + 0.05 ) R
Low Temperature Operation
-65 °C, full rated working voltage for 45 min
± (3.0 % + 0.05 ) R
Humidity
75 °C, 90 % to 100 % RH, 240 h
± (5.0 % + 0.05 ) R
Load Life
1000 h at rated power, +40 °C, 1.5 h “ON”, 0.5 h “OFF”
± (10.0 % + 0.05 ) R
Terminal Strength
10 pounds for 30 s
± (2.0 % + 0.05 ) R
Revision: 15-Feb-16
Document Number: 30233
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages