Data Sheet - Array Gen2 SL-IGR7E9xxBWW

1
Product Family Data Sheet Rev.1.0
Rev.2.0 2016.01.21
2016.03.04
LED Array Module Series
70W Module
SL-IGR7E970BWW
SL-IGR7E97SBWW
SL-IGR7E9C0BWW
Samsung outdoor modules,
providing better solution for outdoor application
Features & Benefits
• High lumen Efficacy of 138 lm/W
• Lens-type module, that makes fixtures easily designed
• IP66 for durability and robustness
Applications
Outdoor Lighting:
• Roadway
• Street Light
• Parking Lot
• Flood Light
2
Table of Contents
1.
Product Code Information
-----------------------
3
2.
Characteristics
-----------------------
4
3.
Structure & Assembly
-----------------------
6
4.
Certification & Declaration
-----------------------
12
5.
Label Structure
-----------------------
13
6.
Packing Structure
-----------------------
15
7.
Precautions in Handling & Use
-----------------------
16
3
1. Product Code Information
Light Distribution (Optical
Lens Type)
Nominal CCT
(K)
Product Code
IESNA Type II Short
5000
SL-IGR7E97SBWW
Circular (BA 70)
5000
SL-IGR7E970BWW
Batwing (BA 120)
5000
SL-IGR7E9C0BWW
Remark
4
2. Characteristics
a) Maximum Rating
Item
Rating
Unit
Remark
Rated Lifetime
>50,000
hour
L80B50 @ tp, 50 = 105 ºC
Ingress Protection (IP)
IP66
-
For Damp Location (UL marking)
Operating Temperature (Tc)
10 ~ 80
ºC
Storage Temperature (Ta)
-30 ~ +85
ºC
※ Ta : Ambient Temperature
b) Electro-optical Characteristics
(IF = 1350 mA)
Item
Unit
Nom. CCT
(K)
Min.
Typ.
Max.
Luminous Flux (Φv)
lm
5000
8500
9700
-
Luminous Efficacy
lm/W
5000
-
138
-
CCT
K
5000
4745
5000
5311
-
75
Color Rendering Index (Ra)
Operating Current (IF)
mA
-
1350
2100
Operating Voltage (VF)
Vdc
47
52.2
56
Power Consumption (P)
W
-
70.1
-
Remark
per module
@ 52.2 V, 1350mA in a module
Notes:
1)
TC: Case temperature, measured at “Tc point” and at the rated typical DC current
2) Samsung maintains measurement tolerance of
: luminous flux = ±7 %, CRI = ±1, voltage = ±5%, CCT = ±5%, Current = ±5%
3) The maximum operating current means the highest limit in any operating condition
4) The power consumption for a specific module is dependent on the operating voltage distribution across the modules in
parallel connection
5
3. Structure & Assembly
a) Appearance
[SL-IGR7E97SBWW]
[SL-IGR7E970BWW]
6
[SL-IGR7E9C0BWW]
Note:
The appearance will be different for various optical solutions depending on the combination of the available core lenses.
Critical dimensions are the same for all optical solutions, except for thickness difference at the core lens cross-section.
7
b) Dimension
Model
Dimension
Specification
Tolerance
Unit
Module Length
245
±1.0
mm
Module Width
186
±1.0
mm
Module Height
45.6
±0.5
mm
PCB Thickness
1.65
±0.16
mm
Module Weight
1.66
±0.2
Kg
Module Length
245
±1.0
mm
Module Width
186
±1.0
mm
Module Height
45.6
±0.5
mm
PCB Thickness
1.65
±0.16
mm
Module Weight
1.66
±0.2
Kg
Module Length
245
±1.0
mm
Module Width
186
±1.0
mm
Module Height
45.6
±0.5
mm
PCB Thickness
1.65
±0.16
mm
Module Weight
1.66
±0.2
Kg
Remark
IESNA Type II
SL-IGR7E97SBWW
SL-IGR7E970BWW
SL-IGR7E9C0BWW
Short
Circular
(BA 70)
Batwing
(BA 120)
8
c) Structure
[SL-IGR7E97SBWW]
No.
Parts
1.
Lens cover screws
(16 pcs)
.
Array lens cover
3.
Rubber seal
4.
LED board
5.
Side inlet harness
6.
Thermal pad
7.
Base plate heat sink
No.
Parts
1.
Lens cover screws
(16 pcs)
.
Array lens cover
3.
Rubber seal
4.
LED board
5.
Side inlet harness
6.
Thermal pad
7.
Base plate heat sink
Specifications
Material: Stainless steel with teflon washer
Location: Between array lens cover and base plate heat sink
Lens type: IESNA Type II Short
Material: Polycarbonate
Thickness: 2.0 mm
UL-94 Flammability: V-2
Material:
Molded silicone
LED: LH351B Ceramic high flux rank (54 pcs)
Material: MC-PCB, aluminum
Thickness: 1.65 mm
Screws: Stainless steel (9 pcs)
Material: Molded PVC coated with silicone sealant
Wires: 22 AWG with end connector
Length (wires): 300 mm
Between PCB and base plate heat sink
Material: Extrusion aluminum
[ SL-IGR7E970BWW]
Specifications
Material: Stainless steel with teflon washer
Location: Between array lens cover and base plate heat sink
Lens type: Circular BA 70
Material: Polycarbonate
Thickness: 2.0 mm
UL-94 Flammability: V-2
Material:
Molded silicone
LED: LH351B Ceramic high flux rank (54 pcs)
Material: MC-PCB, aluminum
Thickness: 1.65 mm
Screws: Stainless steel (9 pcs)
Material: Molded PVC coated with silicone sealant
Wires: 22 AWG with end connector
Length (wires): 300 mm
Between PCB and base plate heat sink
Material: Extrusion aluminum
9
[ SL-IGR7E9C0BWW]
No.
Parts
1.
Lens cover screws
(16 pcs)
.
Array lens cover
3.
Rubber seal
4.
LED board
5.
Side inlet harness
6.
Thermal pad
7.
Base plate heat sink
Specifications
Material: Stainless steel with teflon washer
Location: Between array lens cover and base plate heat sink
Lens type: Batwing BA 120
Material: Polycarbonate
Thickness: 2.0 mm
UL-94 Flammability: V-2
Material:
Molded silicone
LED: LH351B Ceramic high flux rank (54 pcs)
Material: MC-PCB, aluminum
Thickness: 1.65 mm
Screws: Stainless steel (9 pcs)
Material: Molded PVC coated with silicone sealant
Wires: 22 AWG with end connector
Length (wires): 300 mm
Between PCB and base plate heat sink
Material: Extrusion aluminum
10
d) Light Distribution
IESNA Type II Short Lens Type
Circular Beam Angle 70 Lens Type
Batwing Beam Angle 120 Lens Type
11
e) Thermal Management
Performance temperatures are measured on “Tc point” as indicated below (located at long side-center of the Module):
※Tc : case temperature
g) Schematic Circuit
4. Certification & Declaration
Item
Compliant to
Remark
Declaration
RoHS
Hazardous Substance & Material
12
5. Label Structure
a) Module Label
①
②
③
④
Number
Item
Description
①
Model Number (Product Code)
Refer to page 3
Production Date Code
-
Serial Number
00001 ~ 99999
Manufacturing Location
KO (Country / Korea) + SIL (Factory)
②
③
④
b) Outer Box Label
SL-PGR2W5xxBWW
Number
Item
Description
①
Model Number (Product Code)
Refer to page 3
Lot No.
Factory Code (2) + Production Date (4) + Serial No. (4)
Country of Origin
KOREA
Packing Quantity
12 pc
Production Date (year/week)
yyww
Label Printing Date (year/month/date)
yy/mm/dd
②
③
④
⑤
⑥
13
6. Packing Structure
Packing Process
Step 1: 4 Modules in one box:
Step 2: 32 boxes (128 modules) are placed on one pallet:
Dimension (mm)
Packing
Quantity (modules)
Length
Width
Height
Tolerance
Outer Box
4 (1 Inner Box)
330
Outer Box
4 (1 Inner Box)
330
Pallet
128 (32 outer boxes)
1000
1000
130
±10
14
7. Precautions in Handling & Use
7.1. The LED Lighting Modules for white light are devices which are materialized by combining white LEDs. The color of white light
can differ a little unusually to diffuser plate (sign-board panel). Also when the LEDs are illuminating, operating current should be
decided after considering the ambient maximum temperature.
7.2. Handling
To prevent the LED Lighting Modules from making any defectives, please handle the LED Lighting modules with care as follows.
(1) Don’t drop the unit and don’t give the unit any shocks.
(2) Don’t bend the PCB and don’t touch the LED Resin.
(3) Don’t storage the Module in a dusty place or room.
(4) Don’t take the product apart.
(5) Don’t touch the LED and also PCB and other circuit parts of Module with your naked fingers or sharpness things.
(6) Take care so that do not pull wire with hand in case of carries or moves LED Lighting Modules.
(7) *VOCs can be generated from adhesives, flux, hardener or organic additives used in luminaires. This phenomenon can cause a
significant loss of light emitted from the luminaires. In order to prevent these problems, we recommend users to know the
physical properties of the materials used in luminaires, and they must be selected carefully.
(*VOCs: Volatile Organic Compounds)
7.3. Cleaning
The LED Lighting Modules should not be used in any type of fluid such as water, oil, organic solvent, etc.
It is recommended that IPA (Isopropyl Alcohol) be used as a solvent for cleaning the LED Lighting Modules.
When using other solvents, it should be confirmed beforehand whether the solvents will dissolve the package and the resin or not.
Freon solvents should not be used to clean the LEDs because of worldwide regulations. Do not clean the LED Lighting Modules by
the ultrasonic. Before cleaning, a pre-test should be done to confirm whether any damage to the LED Lighting modules will occur.
7.4. Static Electricity
Static electricity or surge voltage damages the LED Lighting Modules. Please keep the working process anti-static electricity
condition to prevent the Lighting from destroying, as following.
(1) Anyone who handles the unit should be well grounded.(earth ring or anti-static glove)
(2) Anyone who handles the unit should wear anti-electrostatic working clothes.
(3) All kinds of device and instruments, such as working table, measuring instruments and assembly jigs in your production lines
should be well grounded.
7.5. Storage
The LED Lighting Modules must be stored to insert a package of a moisture absorbent material(silica gel) in a box.
7.6. Others
If over voltage which exceeds the absolute maximum rating is applied to LED Lighting Modules.
It will cause damage Circuits(that LED is included) and result in destruction.
Do not directly look into lighted LED with naked eyes.
Please use this product within 5 months, which is kept in its original packaging unopened when stocked.
Legal and additional information.
About Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd.
inspires the world and shapes the
future with transformative ideas and
technologies that redefine the worlds
of TVs, smartphones, wearable
devices, tablets, cameras, digital
appliances, printers, medical
equipment, network systems, and
semiconductor and LED solutions.
We are also leading in the Internet of
Things space with the open platform
SmartThings, our broad range of
smart devices, and through proactive
cross-industry collaboration. We
employ 319,000 people across 84
countries with annual sales of US
$196 billion. To discover more, and
for the latest news, feature articles
and press material, please visit the
Samsung Newsroom at
news.samsung.com.
Copyright © 2015 Samsung
Electronics Co., Ltd. All rights
reserved.
Samsung is a registered trademark
of Samsung Electronics Co., Ltd.
Specifications and designs are
subject to change without notice.
Non-metric
weights and measurements are
approximate. All data were deemed
correct
at time of creation. Samsung is not
liable for errors or omissions. All
brand, product,
service names and logos are
trademarks and/or registered
trademarks of their
respective owners and are hereby
recognized and acknowledged.
Samsung Electronics Co., Ltd.
95, Samsung 2-ro
Giheung-gu
Yongin-si, Gyeonggi-do, 446-711
KOREA
www.samsungled.com
Similar pages