LCD-008N002A1-TMI-ET Datasheet

LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
8 x 2 Character LCD
FEATURES
• Type: Character
• Display format: 8 x 2 characters
• Built-in controller: ST 7066 or equivalent
• Duty cycle: 1/16
• 5 x 8 dots includes cursor
• + 5 V power supply
• LED can be driven by pin 1, pin 2, or A and K
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
ITEM
ABSOLUTE MAXIMUM RATINGS
STANDARD VALUE
Module Dimension
UNIT
58.0 x 32.0 x 13.2 max.
ITEM
SYMBOL
STANDARD VALUE
MIN.
TYP.
MAX.
Viewing Area
38.0 x 16.0
Power Supply
VDD to VSS
- 0.3
-
7.0
Dot Size
0.56 x 0.66
Input Voltage
VI
VSS
-
VDD
Dot Pitch
0.60 x 0.70
Mounting Hole
53.0 x 27.0
Character Size
2.96 x 5.56
mm
UNIT
V
Note
• VSS = 0 V, VDD = 5.0 V
ELECTRICAL CHARACTERISTICS
ITEM
SYMBOL
CONDITION
Input Voltage
VDD
Supply Current
IDD
Recommended LC Driving
Voltage for Normal Temperature
Version Module
VDD to V0
STANDARD VALUE
UNIT
MIN.
TYP.
MAX.
VDD = + 5 V
4.7
5.0
5.3
V
VDD = + 5 V
-
1.2
-
mA
5.5
- 20 °C
-
-
0 °C
-
-
-
25 °C
-
4.4
-
50 °C
-
-
-
70 °C
3.5
-
-
V
LED Forward Voltage
VF
25 °C
-
4.2
4.6
V
LED Forward Current
IF
25 °C
-
70
140
mA
EL Power Supply Current
IEL
VEL = 110 VAC, 400 Hz
-
-
5.0
mA
OPTIONS
PROCESS COLOR
BACKLIGHT
TN
STN
GRAY
STN
YELLOW
STN
BLUE
FSTN
B&W
STN
COLOR
NONE
LED
EL
CCFL
x
x
x
x
x
-
x
x
x
-
For detailed information, please see the “Product Numbering System” document.
DISPLAY CHARACTER ADDRESS CODE
Display Position
1
2
3
4
5
6
7
8
DD RAM Address
00
01
02
03
04
05
06
07
DD RAM Address
40
41
42
43
44
45
46
47
Revision: 08-Jan-13
Document Number: 37472
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
INTERFACE PIN FUNCTIONS
PIN NO.
SYMBOL
FUNCTION
1
VSS
Ground
2
VDD
Supply voltage for logic + 5 V
3
V0
Operating voltage for LCD (variable)
4
RS
H: Data, L: Instruction code
5
RW
H: Read (MPU  module), L: Write (MPU  module)
6
E
Chip enable signal
7
DB0
Data bus line
8
DB1
Data bus line
9
DB2
Data bus line
10
DB3
Data bus line
11
DB4
Data bus line
12
DB5
Data bus line
13
DB6
Data bus line
14
DB7
Data bus line
15
A
LED+
16
K
LED-
DIMENSIONS in millimeters
58.0 ± 0.5
43.2
38.0(VA)
27.81(AA)
13.2 max
2.5
2.9
8.0
10.25
7.4
10.0
15.095
27.0
32.0 ± 0.5
26.2
16.0(VA)
11.5(AA)
A
K
29.0
2.5
4- 2.5 PTH
4- 5.0 PAD
53.0
2.54
2.96
1.7
0.59
1.6
LED B/L
0.60
0.56
15
16- 1.0 PTH
16- 1.8 PAD
2
The non-specified tolerance of dimension is ± 0.3 mm.
5.56
0.70
0.66
17.78
(P2.54*7)
16
1
PIN DETAIL
Revision: 08-Jan-13
0.38
7.11
8.6
DOT SIZE
SCALE 5/1
Document Number: 37472
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
1.Module Classification Information
ʳ ʳ
ʳ ʳ
LCD -008
c
d
N 002
e
f
A1
g
-T M
h
i
I
j
-ET
k
1. BrandΚVishay Intertechnology, Inc.
2. Horizontal Format: Characters
3. Display TypeΚNШCharacter Type, HШGraphic Type
4. Vertical Format: 2 Lines
5. Model serials no.: A1
6. Backlight
NШWithout backlight
TШLED, White
TypeΚ
BШEL, Blue green
AШLED, Amber
DШEL, Green
RШLED, Red
WШEL, White
OШLED, Orange
FШCCFL, White
GШLED, Green
YШLED, Yellow Green
7. LCD ModeΚ BШTN Positive, Gray
TШFSTN Negative
NШTN Negative,
GШSTN Positive, Gray
YШSTN Positive, Yellow Green
MШSTN Negative, Blue
FШFSTN Positive
8. LCD Polarizer AШReflective, N.T, 6:00
HШTransflective, W.T,6:00
Type/ Temperature DШReflective, N.T, 12:00
KШTransflective, W.T,12:00
range/ View
GШReflective, W. T, 6:00
CШTransmissive, N.T,6:00
direction
JШReflective, W. T, 12:00
FШTransmissive, N.T,12:00
BШTransflective, N.T,6:00
IШTransmissive, W. T, 6:00
EШTransflective, N.T.12:00 LШTransmissive, W.T,12:00
9.
Special Code
Revision: 08-Jan-13
ET : English and Europe standard font
Complies with the ROHS Directions and regulations;
Document Number: 37472
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
2.Precautions in use of LCD Modules
(1)Avoid applying excessive shocks to the module or making any alterations or modifications to it.
(2)Don’t make extra holes on the printed circuit board, modify its shape or change the components of
LCD module.
(3)Don’t disassemble the LCM.
(4)Don’t operate it above the absolute maximum rating.
(5)Don’t drop, bend or twist LCM.
(6)Soldering: only to the I/O terminals.
(7)Storage: please storage in anti-static electricity container and clean environment.
(8)Supplier has the right to change the passive components
(9)Supplier has the right to change the PCB Rev.
3.General Specification
Item
Dimension
Unit
8 characters x 2 Lines
Ё
58.0 x 32.0 x 13.2(MAX)
mm
View area
38.0 x 16.0
mm
Active area
27.81 x 11.5
mm
Dot size
0.56 x 0.66
mm
Dot pitch
0.60 x 0.70
mm
Character size
2.96 x 5.56
mm
Character pitch
3.55 x 5.94
mm
Number of Characters
Module dimension
LCD type
STN Negative, Blue Transmissive,
(In LCD production, It will occur slightly color difference. We
can only guarantee the same color in the same batch.)
Duty
1/16
View direction
6 o’clock
Backlight Type
LED White
Revision: 08-Jan-13
Document Number: 37472
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
4.Absolute Maximum Ratings
Item
Symbol
Min
Typ
Max
Unit
Operating Temperature
T OP
-20
Ё
+70
к
Storage Temperature
T ST
-30
Ё
+80
к
Input Voltage
VI
V SS
Ё
V DD
V
Supply Voltage For Logic
VDD-V SS
-0.3
Ё
7
V
Supply Voltage For LCD
V DD -V 0
-0.3
Ё
13
V
5.Electrical Characteristics
Item
Supply Voltage For Logic
Supply Voltage For LCD
*Note
Symbol
Condition
Min
Typ
Max
Unit
V DD -V SS
Ё
4.5
5.0
5.5
V
Ta=-20к
Ё
Ё
5.5
V
Ta=25к
Ё
4.4
Ё
V
Ta=70к
3.5
Ё
Ё
V
V DD -V 0
Input High Volt.
V IH
Ё
0.7 V DD
Ё
V DD
V
Input Low Volt.
V IL
Ё
V SS
Ё
0.6
V
Output High Volt.
V OH
Ё
3.9
Ё
Ё
V
Output Low Volt.
V OL
Ё
Ё
Ё
0.4
V
Supply Current
I DD
V DD =5V
Ё
1.2
Ё
mA
* Note: Please design the VOP adjustment circuit on customer's main board
Vdd
VR
10K~20K
Vo
LCM
Module
VSS
Revision: 08-Jan-13
Document Number: 37472
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
6.Optical Characteristics
Item
Symbol
Condition
Min
Typ
Max
Unit
(V)Ӱ
CRЊ2
20
Ё
40
deg
(H)ӽ
CRЊ2
-30
Ё
30
deg
CR
Ё
Ё
3
Ё
Ё
T rise
Ё
Ё
150
200
ms
T fall
Ё
Ё
150
200
ms
View Angle
Contrast Ratio
Response Time @ 25C
Definition of Operation Voltage (Vop)
Intensity
100䋦
Definition of Response Time ( Tr , Tf )
Non-selected
Conition
Selected Wave
Non-selected Wave
Selected Conition
Non-selected
Conition
Intensity
10䋦
Cr Max
Cr = Lon / Loff
90䋦
100䋦
Vop
Tr
Driving Voltage(V)
[positive type]
Tf
[positive type]
Conditions :
Operating Voltage : Vop
Viewing Angle(ӰΔӽ) : 0̓Δ 0̓
Frame Frequency : 64 HZ
Driving Waveform : 1/N duty , 1/a bias
Definition of viewing angle(CRЊ2)
f
l
b
= 180°
r
= 90°
= 270°
= 0°
Revision: 08-Jan-13
Document Number: 37472
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
7.Interface Pin Function
Pin No. Symbol
Level
Description
1
V SS
0V
2
V DD
5.0V
3
VO
4
RS
H/L
H: DATA, L: Instruction code
5
R/W
H/L
H: Read(MPUШModule) L: Write(MPUШModule)
6
E
H,HШL
7
DB0
H/L
Data bus line
8
DB1
H/L
Data bus line
9
DB2
H/L
Data bus line
10
DB3
H/L
Data bus line
11
DB4
H/L
Data bus line
12
DB5
H/L
Data bus line
13
DB6
H/L
Data bus line
14
DB7
H/L
Data bus line
15
A
LED+
16
K
LED-
Revision: 08-Jan-13
Ground
Supply Voltage for logic
(Variable) Operating voltage for LCD
Chip enable signal
Document Number: 37472
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
58.0 0.5
43.2
38.0(VA)
27.81(AA)
13.2 max
2.5
7.4
10.0
15.095
27.0
K
29.0
7.11
2.5
8.6
A
32.0 0.5
26.2
16.0(VA)
11.5(AA)
2.9
8.0
10.25
8.Contour Drawing &Block Diagram
4- 2.5 PTH
4- 5.0 PAD
53.0
2.54
LED B/L
1.7
15
17.78
(P2.54*7)
16
1.6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Vss
Vdd
Vo
RS
R/W
E
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
A
K
16- 1.0 PTH
16- 1.8 PAD
2
2.96
1
0.59
0.60
0.56
PIN DETAIL
0.38
5.56
0.70
0.66
The non-specified tolerance of dimension is ¡ À
0.3 mm .
Revision: 08-Jan-13
DOT SIZE
SCALE 5/1
Document Number: 37472
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
80 series
or
68 series
VR
10K~20K
Vdd
Vo
Vss
Com1~8
Controller/Com Driver
HD44780
or
Equivalent
Bias and
Power Circuit
MPU
RS
R/W
E
DB0~DB7
Vishay
Com9~16
8X2 LCD
Seg1~40
External contrast adjustment.
Character located
DDRAM address
DDRAM address
Revision: 08-Jan-13
1 2 3 4 5 6 7 8
00 01 02 03 04 05 06 07
40 41 42 43 44 45 46 47
Document Number: 37472
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
9.Function Description
The LCD display Module is built in a LSI controller, the controller has two 8-bit registers, an
instruction register (IR) and a data register (DR).
The IR stores instruction codes, such as display clear and cursor shift, and address information for
display data RAM (DDRAM) and character generator (CGRAM). The IR can only be written from the
MPU. The DR temporarily stores data to be written or read from DDRAM or CGRAM. When
address information is written into the IR, then data is stored into the DR from DDRAM or CGRAM.
By the register selector (RS) signal, these two registers can be selected.
RS
R/W
Operation
0
0
IR write as an internal operation (display clear, etc.)
0
1
Read busy flag (DB7) and address counter (DB0 to DB7)
1
0
Write data to DDRAM or CGRAM (DR to DDRAM or CGRAM)
1
1
Read data from DDRAM or CGRAM (DDRAM or CGRAM to DR)
Busy Flag (BF)
When the busy flag is 1, the controller LSI is in the internal operation mode, and the next instruction
will not be accepted. When RS=0 and R/W=1, the busy flag is output to DB7. The next instruction
must be written after ensuring that the busy flag is 0.
Address Counter (AC)
The address counter (AC) assigns addresses to both DDRAM and CGRAM
Display Data RAM (DDRAM)
This DDRAM is used to store the display data represented in 8-bit character codes. Its extended
capacity is 80ͪ8 bits or 80 characters. Below figure is the relationship between DDRAM addresses
and positions on the liquid crystal display.
High bits
Low bits
Example: DDRAM addresses 4E
AC
(hexadecimal)
Revision: 08-Jan-13
AC6 AC5 AC4 AC3 AC2 AC1 AC0
1
0
0
1
1
1
0
Document Number: 37472
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
Display position DDRAM address
1
00
40
2
3
4
5
6
7
8
01 02
41 42
03
43
04 05 06 07
44 45 46 47
2-Line by 8-Character Display
Character Generator ROM (CGROM)
The CGROM generate 5ͪ8 dot or 5ͪ10 dot character patterns from 8-bit character codes. See Table 2.
Character Generator RAM (CGRAM)
In CGRAM, the user can rewrite character by program. For 5ͪ8 dots, eight character patterns can be
written, and for 5ͪ10 dots, four character patterns can be written.
Write into DDRAM the character code at the addresses shown as the left column of table 1. To show
the character patterns stored in CGRAM.
Revision: 08-Jan-13
Document Number: 37472
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
Relationship between CGRAM Addresses, Character Codes (DDRAM) and Character patterns
Table 1.
For 5 * 8 dot character patterns
Character Codes
( DDRAM data )
7 6 5 4 3 2 1 0
High
0 0 0 0
0 0 0 0
0 0 0 0
Low
* 0 0 0
* 0 0 1
* 1 1 1
CGRAM Address
5 4 3 2 1 0
Low
0 0
0 0
0 1
0 1
0 0 0 1 0
1 0
1 1
1 1
0 0
0 0
0 1
0 1
0 0 1 1 0
1 0
1 1
1 1
0 0
0 0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
1 1 1 1
1
1
1
0
1
0
1
Character Patterns
( CGRAM data )
7 6 5 4 3 2 1 0
High
0
0
1
1
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
High
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
Low
0
0 0 0
0 0 0
0
0
0
0 0
0
0
0 0
0
0
0
0
0
0
0 0
0
0
0 0
0
0
Character
pattern( 1 )
0 0
Character
pattern( 2 )
0 0
0 0
0 0
0 0
0 0 0 0 0
Cursor pattern
Cursor pattern
* * *
For 5 * 10 dot character patterns
Character Codes
( DDRAM data )
7 6 5 4 3 2 1 0
High
0 0 0 0
Low
* 0 0 0
CGRAM Address
5 4 3 2 1 0
High
Character Patterns
( CGRAM data )
7 6 5 4 3 2 1 0
Low
0
0
0
0
0
0 0 0
0
0
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
0
1
1
0
0
1
1
0
0
1
High
0
1
0
1
0
1
0
1
0
1
0
1 1 1 1
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Low
* 0 0 0 0 0
* 0 0 0 0 0
0
0
*
0 0
*
0 0 0
*
0 0 0
*
0
*
0 0 0 0
*
0 0 0 0
*
0 0 0 0
*
* 0 0 0 0 0
Character
pattern
Cursor pattern
* * * * * * * *
: " High "
Revision: 08-Jan-13
Document Number: 37472
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
10.Character Generator ROM Pattern
Table.2
Upper
4 bit
Lower
4 bit
LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHH
LLLL
CG
RAM
(1)
LLLH
CG
RAM
(2)
LLHL
CG
RAM
(3)
LLHH
CG
RAM
(4)
LHLL
CG
RAM
(5)
LHLH
CG
RAM
(6)
LHHL
CG
RAM
(7)
LHHH
CG
RAM
(8)
HLLL
CG
RAM
(1)
HLLH
CG
RAM
(2)
HLHL
CG
RAM
(3)
HLHH
CG
RAM
(4)
HHLL
CG
RAM
(5)
HHLH
CG
RAM
(6)
HHHL
CG
RAM
(7)
HHHH
CG
RAM
(8)
Revision: 08-Jan-13
Document Number: 37472
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
11.Instruction Table
Instruction Code
Instruction
Execution time
(fosc=270Khz)
Description
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
Clear Display
0
0
0
0
0
0
0
0
0
1
Write “00H” to DDRAM and set
DDRAM address to “00H” from AC
1.53ms
Set DDRAM address to “00H” from AC
and return cursor to its original position
if shifted. The contents of DDRAM are
not changed.
1.53ms
Assign cursor moving direction and
enable the shift of entire display.
39Ӵs
Set display (D), cursor (C), and blinking
of cursor (B) on/off control bit.
39Ӵs
Return Home
0
0
0
0
0
0
0
0
1
Ё
Entry Mode
Set
0
0
0
0
0
0
0
1
I/D
SH
Display
ON/OFF
Control
0
0
0
0
0
0
1
D
C
B
Cursor or
Display Shift
0
0
0
0
0
1
Ё
Ё control bit, and the direction, without
Function Set
Set CGRAM
Address
Set DDRAM
Address
Set cursor moving and display shift
S/C R/L
39Ӵs
changing of DDRAM data.
Set interface data length
(DL:8-bit/4-bit), numbers of display line
(N:2-line/1-line)and, display font type
(F:5ͪ11 dots/5ͪ8 dots)
39Ӵs
AC5 AC4 AC3 AC2 AC1 AC0 Set CGRAM address in address counter.
39Ӵs
1
DL
N
F
Ё
Ё
0
0
0
0
0
0
0
1
0
0
1
AC6 AC5 AC4 AC3 AC2 AC1 AC0 Set DDRAM address in address counter.
39Ӵs
Whether during internal operation or not
can be known by reading BF. The
AC6 AC5 AC4 AC3 AC2 AC1 AC0
contents of address counter can also be
read.
0Ӵs
Read Busy
Flag and
Address
0
1
BF
Write Data to
RAM
1
0
D7
D6
D5
D4
D3
D2
D1
D0
Write data into internal RAM
(DDRAM/CGRAM).
43Ӵs
Read Data
from RAM
1
1
D7
D6
D5
D4
D3
D2
D1
D0
Read data from internal RAM
(DDRAM/CGRAM).
43Ӵs
Ϡ ”Ё”Κdon’t care
Revision: 08-Jan-13
Document Number: 37472
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
12.Timing Characteristics
12.1ʳʳ Write Operation
Ta=25к, VDD=5ˁ˃V
Item
Symbol
Min
Typ
Max
Unit
Enable cycle time
TC
1200
Ё
Ё
ns
Enable pulse width
TPW
140
Ё
Ё
ns
Enable rise/fall time
TR,TF
Ё
Ё
25
ns
Address set-up time (RS, R/W to E)
t AS
0
Ё
Ё
ns
Address hold time
t AH
10
Ё
Ё
ns
Data set-up time
t DSW
40
Ё
Ё
ns
tH
10
Ё
Ё
ns
Data hold time
Revision: 08-Jan-13
Document Number: 37472
15
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
12.Timing Characteristics
12.1ʳʳ Write Operation
Ta=25к, VDD=5ˁ˃V
Item
Symbol
Min
Typ
Max
Unit
Enable cycle time
TC
1200
Ё
Ё
ns
Enable pulse width
TPW
140
Ё
Ё
ns
Enable rise/fall time
TR,TF
Ё
Ё
25
ns
Address set-up time (RS, R/W to E)
t AS
0
Ё
Ё
ns
Address hold time
t AH
10
Ё
Ё
ns
Data set-up time
t DSW
40
Ё
Ё
ns
tH
10
Ё
Ё
ns
Data hold time
Revision: 08-Jan-13
Document Number: 37472
16
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
13.Initializing of LCM
Power on
Wait for more than 40 ms after VDD rises to 4.5 V
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
*
0
0
0
1
1
*
*
*
0
Function set
Wait for more than 39us
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0
0
0
1
0
*
*
*
*
0
0
N F
*
*
*
*
*
*
0
Function set
Wait for more than 39 µs
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0
0
0
1
0
*
*
*
* Function set
0
*
*
*
N F
*
0
0
*
*
Wait for more than 37us
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Display ON/OFF control
* *
*
0
0
*
0
0
0
0
* *
*
B
*
1
D C
0
0
Wait for more than 37 µs
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Display Clear
*
*
0
0
0
*
*
0
0
0
*
*
0
0
*
*
0
0
0
1
Wait for more than 1.53ms
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Entry Mode Set
* *
0
0
0
*
0
0
0
*
0
1
* *
*
0
0
I/D SH *
Initialization ends
4-Bit Ineterface
Revision: 08-Jan-13
Document Number: 37472
17
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
Power on
Wait for more than 40 ms after VDD rises to 4.5 V
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Function set
0 0 0 0 1 1 N F * *
Wait for more than 39us
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0 0 0 0 1 1 N F * *
Function set
Wait for more than 37us
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Display ON/OFF control
0 0 0 0 0 0 1 B C
D
Wait for more than 37 µs
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Display Clear
0 0 0 0 0 0 0 0 0 1
Wait for more than 1.53ms
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Entry Mode Set
0 0 0 0 0 0 0 1 I/D S
Initialization ends
8-Bit Ineterface
Revision: 08-Jan-13
Document Number: 37472
18
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
14.Reliability
Content of Reliability Test (wide temperature, -20к~70к)
Environmental Test
Test Item
High Temperature
storage
Low Temperature
storage
High Temperature
Operation
Low Temperature
Operation
High Temperature/
Humidity Operation
Thermal shock
resistance
Content of Test
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the electric stress
(Voltage & Current) and the thermal stress to the
element for a long time.
Endurance test applying the electric stress under
low temperature for a long time.
The module should be allowed to stand at 60
к,90%RH max
For 96hrs under no-load condition excluding the
polarizer,
Then taking it out and drying it at normal
temperature.
The sample should be allowed stand the
following 10 cycles of
operation
-20к
25к
70к
30min
5min
1 cycle
Vibration test
Static electricity test
Test Condition
80к
200hrs
-30к
200hrs
Note
2
1,2
70к
200hrs
——
-20к
200hrs
1
60к,90%RH
96hrs
1,2
-20к/70к
10 cycles
——
30min
Endurance test applying the vibration during
transportation and using.
Total fixed
amplitude : 1.5mm
Vibration
Frequency :
10~55Hz
3
One cycle 60
seconds to 3
directions of X,Y,Z
for
Each
15 minutes
Endurance test applying the electric stress to the
terminal.
VS=800V,RS=1.5k
Ө
——
CS=100pF
1 time
Note1: No dew condensation to be observed.
Note2: The function test shall be conducted after 4 hours storage at the normal
Temperature and humidity after remove from the test chamber.
Note3: Vibration test will be conducted to the product itself without putting it in a container.
Revision: 08-Jan-13
Document Number: 37472
19
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
15.Backlight Information
Specification
PARAMETER
SYMBOL
MIN
TYP
MAX
UNIT
TESTʳʳ CONDITION
Supply Current
ILED
14.6
16
25
mA
V=3.5V
Supply Voltage
V
3.4
3.5
3.6
V
Ё
Reverse Voltage
VR
Ё
Ё
5
V
Ё
Luminous Intensity
IV
130
160
Ё
CD/M2
ILED=16mA
x
Ё
0.300
Ё
Ё
Ё
y
Ё
0.310
Ё
Ё
Ё
Chromaticity
LED Life Time
ILED㻡
㻡16mA
Ё
(For Reference only)
Ё
50K
Ё
Color
Hr.
25㷄㪃㪌㪇-60%RH,
(Note 1)
White
Note: The LED of B/L is drive by current only, drive voltage is for reference only.
drive voltage can make driving current under safety area (current between
minimum and maximum).
Note 1:50K hours is only an estimate for reference.
2.Drive from pin15,pin16
R
R
A
K
B/L
LCM
ill never get Vee output from pin15)
Revision: 08-Jan-13
Document Number: 37472
20
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
16. Inspection specification
NO
01
02
Item
Criterion
AQL
Electrical
Testing
1.1 Missing vertical, horizontal segment, segment contrast defect.
1.2 Missing character , dot or icon.
1.3 Display malfunction.
1.4 No function or no display.
1.5 Current consumption exceeds product specifications.
1.6 LCD viewing angle defect.
1.7 Mixed product types.
1.8 Contrast defect.
0.65
Black or white 2.1 White and black spots on display Љ0.25mm, no more than
spots on LCD
three white or black spots present.
(display only) 2.2 Densely spaced: No more than two spots or lines within 3mm
3.1 Round type : As following drawing
ӥːʻʳ̋ʳʾʳ̌ʳʼʳ˂ʳ˅ʳ ʳ ʳ ʳ
˦˜˭˘ʳ
2.5
˔˶˶˸̃̇˴˵˿˸ʳˤʳ˧ˬʳ
ʳ ʳ ʳ ʳ ʳ ӥЉ˃ˁ˄˃ʳ ˔˶˶˸̃̇ʳ́̂ʳ˷˸́̆˸ʳ
˃ˁ˄˃ІӥЉ˃ˁ˅˃ʳ
03
˅ʳ
˃ˁ˅˃ІӥЉ˃ˁ˅ˈʳ
˄ʳ
LCD black
ʳ
˃ˁ˅ˈІӥʳ
˃ʳ
spots, white
spots,
contamination
(non-display) 3.2 Line type : (As following drawing)
Length
Width
Acceptable Q TY
--WЉ˃ˁ˃˅
Accept no dense
LЉˆˁ˃ 0.02ІWЉ˃ˁ˃ˆ
2
LЉ˅ˁˈ 0.03ІWЉ˃ˁ˃ˈʳ
---
Revision: 08-Jan-13
0.05ІW
2.5
2.5
As round type
Document Number: 37472
21
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
04
Polarizer
bubbles
NO
Item
05
Scratches
Revision: 08-Jan-13
If bubbles are visible,
judge using black spot
specifications, not easy
to find, must check in
specify direction.
Vishay
Size ӥ
ӥЉ˃ˁ˅˃
Acceptable Q TY
Accept no dense
˃ˁ˅˃ІӥЉ˃ˁˈ˃
3
˃ˁˈ˃ІӥЉ˄ˁ˃˃
2
˄ˁ˃˃Іӥ
Total Q TY
0
Criterion
2.5
3
AQL
Follow NO.3 LCD black spots, white spots, contamination
Document Number: 37472
22
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
Symbols Define:
x: Chip length
y: Chip width
z: Chip thickness
k: Seal width
t: Glass thickness a: LCD side length
L: Electrode pad length:
6.1 General glass chip :
6.1.1 Chip on panel surface and crack between panels:
06
Chipped
glass
̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ
̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ
̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ
˭Љ˄˂˅̇ʳ
ˡ̂̇ʳ̂̉˸̅ʳ̉˼˸̊˼́˺ʳ˴̅˸˴ʳ
̋Љ˄˂ˋ˴ʳ
˄˂˅̇І̍Љ˅̇ʳ
ˡ̂̇ʳ˸̋˶˸˸˷ʳ˄˂ˆ˾ʳ ʳ
̋Љ˄˂ˋ˴ʳ
2.5
Ф˜˹ʳ̇˻˸̅˸ʳ˴̅˸ʳ˅ʳ̂̅ʳ̀̂̅˸ʳ˶˻˼̃̆ʿʳ̋ʳ˼̆ʳ̇̂̇˴˿ʳ˿˸́˺̇˻ʳ̂˹ʳ˸˴˶˻ʳ˶˻˼̃ˁʳ
ʳ
ˉˁ˄ˁ˅ʳ˖̂̅́˸̅ʳ˶̅˴˶˾ˍʳ
ʳ
̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ
ʳ
̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ
˭Љ˄˂˅̇ʳ
ˡ̂̇ʳ̂̉˸̅ʳ̉˼˸̊˼́˺ʳ˴̅˸˴ʳ
̋Љ˄˂ˋ˴ʳ
˄˂˅̇І̍Љ˅̇ʳ
ˡ̂̇ʳ˸̋˶˸˸˷ʳ˄˂ˆ˾ʳ ʳ
̋Љ˄˂ˋ˴ʳ
̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ
Ф˜˹ʳ̇˻˸̅˸ʳ˴̅˸ʳ˅ʳ̂̅ʳ̀̂̅˸ʳ˶˻˼̃̆ʿʳ̋ʳ˼̆ʳ̇˻˸ʳ̇̂̇˴˿ʳ˿˸́˺̇˻ʳ̂˹ʳ˸˴˶˻ʳ˶˻˼̃ˁʳ
ʳ
Revision: 08-Jan-13
Document Number: 37472
23
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
NO
Vishay
Item
Criterion
AQL
˦̌̀˵̂˿̆ʳˍʳ
x: Chip length
y: Chip width
z: Chip thickness
k: Seal width
t: Glass thickness a: LCD side length
L: Electrode pad length
6.2 Protrusion over terminal :
6.2.1 Chip on electrode pad :
̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ ʳ
̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ
̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ
̌Љ˃ˁˈ̀̀ʳ
̋Љ˄˂ˋ˴ʳ
˃ʳ Іʳ ̍ʳЉʳ̇ʳ
ˉˁ˅ˁ˅ʳˡ̂́ˀ˶̂́˷̈˶̇˼̉˸ʳ̃̂̅̇˼̂́ˍʳ
06
Glass
crack
2.5
̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ ʳ
̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ
̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ
̌Љʳ˟ʳ
̋Љ˄˂ˋ˴ʳ
˃ʳ Іʳ ̍ʳЉʳ̇ʳ
ʳ
Ф˜˹ʳ̇˻˸ʳ˶˻˼̃̃˸˷ʳ˴̅˸˴ʳ̇̂̈˶˻˸̆ʳ̇˻˸ʳ˜˧ˢʳ̇˸̅̀˼́˴˿ʿʳ̂̉˸̅ʳ˅˂ˆʳ̂˹ʳ̇˻˸ʳ˜˧ˢʳ̀̈̆̇ʳ
̅˸̀˴˼́ʳ˴́˷ʳ˵˸ʳ˼́̆̃˸˶̇˸˷ʳ˴˶˶̂̅˷˼́˺ʳ̇̂ʳ˸˿˸˶̇̅̂˷˸ʳ̇˸̅̀˼́˴˿ʳ̆̃˸˶˼˹˼˶˴̇˼̂́̆ˁʳ
Ф˜˹ʳ̇˻˸ʳ̃̅̂˷̈˶̇ʳ̊˼˿˿ʳ˵˸ʳ˻˸˴̇ʳ̆˸˴˿˸˷ʳ˵̌ʳ̇˻˸ʳ˶̈̆̇̂̀˸̅ʿʳ̇˻˸ʳ˴˿˼˺́̀˸́̇ʳ̀˴̅˾ʳ
́̂̇ʳ˵˸ʳ˷˴̀˴˺˸˷ˁʳ
ˉˁ˅ˁˆʳ˦̈˵̆̇̅˴̇˸ʳ̃̅̂̇̈˵˸̅˴́˶˸ʳ˴́˷ʳ˼́̇˸̅́˴˿ʳ˶̅˴˶˾ˁʳ
ʳ
Revision: 08-Jan-13
̌ˍʳ̊˼˷̇˻ʳ ʳ
̋ˍʳ˿˸́˺̇˻ʳ
̌Љ˄˂ˆ˟ʳ
̋ʳЉʳ˴ʳ
ʳ
Document Number: 37472
24
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
NO
Item
07
Cracked glass
08
09
10
Backlight
elements
Bezel
PCBΕCOB
Vishay
Criterion
˧˻˸ʳ˟˖˗ʳ̊˼̇˻ʳ˸̋̇˸́̆˼̉˸ʳ˶̅˴˶˾ʳ˼̆ʳ́̂̇ʳ˴˶˶˸̃̇˴˵˿˸ˁʳ
ʳ
ˋˁ˄ʳ˜˿˿̈̀˼́˴̇˼̂́ʳ̆̂̈̅˶˸ʳ˹˿˼˶˾˸̅̆ʳ̊˻˸́ʳ˿˼̇ˁʳ
ˋˁ˅ʳ˦̃̂̇̆ʳ̂̅ʳ̆˶̅˴̇˶˻˸˷ʳ̇˻˴̇ʳ˴̃̃˸˴̅ʳ̊˻˸́ʳ˿˼̇ʳ̀̈̆̇ʳ˵˸ʳ˽̈˷˺˸˷ˁʳ˨̆˼́˺ʳ
˟˖˗ʳ̆̃̂̇ʿʳ˿˼́˸̆ʳ˴́˷ʳ˶̂́̇˴̀˼́˴̇˼̂́ʳ̆̇˴́˷˴̅˷̆ˁʳ
ˋˁˆʳ˕˴˶˾˿˼˺˻̇ʳ˷̂˸̆́ϗ̇ʳ˿˼˺˻̇ʳ̂̅ʳ˶̂˿̂̅ʳ̊̅̂́˺ˁʳ
ʳ
ʳ
ˌˁ˄ʳ˕˸̍˸˿ʳ̀˴̌ʳ́̂̇ʳ˻˴̉˸ʳ̅̈̆̇ʿʳ˵˸ʳ˷˸˹̂̅̀˸˷ʳ̂̅ʳ˻˴̉˸ʳ˹˼́˺˸̅̃̅˼́̇̆ʿʳ̆̇˴˼́̆ʳ
̂̅ʳ̂̇˻˸̅ʳ˶̂́̇˴̀˼́˴̇˼̂́ˁʳ
ˌˁ˅ʳ˕˸̍˸˿ʳ̀̈̆̇ʳ˶̂̀̃˿̌ʳ̊˼̇˻ʳ˽̂˵ʳ̆̃˸˶˼˹˼˶˴̇˼̂́̆ˁʳ
ʳ
ʳ
˄˃ˁ˄ʳ˖ˢ˕ʳ̆˸˴˿ʳ̀˴̌ʳ́̂̇ʳ˻˴̉˸ʳ̃˼́˻̂˿˸̆ʳ˿˴̅˺˸̅ʳ̇˻˴́ʳ˃ˁ˅̀̀ʳ̂̅ʳ
˶̂́̇˴̀˼́˴̇˼̂́ˁʳ
˄˃ˁ˅ʳ˖ˢ˕ʳ̆˸˴˿ʳ̆̈̅˹˴˶˸ʳ̀˴̌ʳ́̂̇ʳ˻˴̉˸ʳ̃˼́˻̂˿˸̆ʳ̇˻̅̂̈˺˻ʳ̇̂ʳ̇˻˸ʳ˜˖ˁʳ
˄˃ˁˆʳThe height of the COB should not exceed the height indicated
in the assembly diagram.
10.4 There may not be more than 2mm of sealant outside the seal
area on the PCB. And there should be no more than three
places.
10.5 No oxidation or contamination PCB terminals.
10.6 Parts on PCB must be the same as on the production
characteristic chart. There should be no wrong parts, missing
parts or excess parts.
10.7 The jumper on the PCB should conform to the product
characteristic chart.
10.8 If solder gets on bezel tab pads, LED pad, zebra pad or screw
hold pad, make sure it is smoothed down.
˄˃ˁˌ The Scraping testing standard for Copper Coating of PCB
AQL
2.5
0.65
2.5
0.65
2.5
0.65
2.5
2.5
0.65
2.5
2.5
0.65
0.65
2.5
2.5
X
Y
11
Soldering
Revision: 08-Jan-13
2
X * Y<=2mm ʳ
ʳ
˄˄ˁ˄ʳˡ̂ʳ̈́ˀ̀˸˿̇˸˷ʳ̆̂˿˷˸̅ʳ̃˴̆̇˸ʳ̀˴̌ʳ˵˸ʳ̃̅˸̆˸́̇ʳ̂́ʳ̇˻˸ʳˣ˖˕ˁʳ
˄˄ˁ˅ʳˡ̂ʳ˶̂˿˷ʳ̆̂˿˷˸̅ʳ˽̂˼́̇̆ʿʳ̀˼̆̆˼́˺ʳ̆̂˿˷˸̅ʳ˶̂́́˸˶̇˼̂́̆ʿʳ̂̋˼˷˴̇˼̂́ʳ̂̅ʳ
˼˶˼˶˿˸ˁʳ
˄˄ˁˆʳˡ̂ʳ̅˸̆˼˷̈˸ʳ̂̅ʳ̆̂˿˷˸̅ʳ˵˴˿˿̆ʳ̂́ʳˣ˖˕ˁʳ
˄˄ˁˇʳˡ̂ʳ̆˻̂̅̇ʳ˶˼̅˶̈˼̇̆ʳ˼́ʳ˶̂̀̃̂́˸́̇̆ʳ̂́ʳˣ˖˕ˁʳ
ʳ
2.5
2.5
2.5
0.65
Document Number: 37472
25
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
NO
12
Item
General
appearance
Revision: 08-Jan-13
Criterion
ʳ
˄˅ˁ˄ʳˡ̂ʳ̂̋˼˷˴̇˼̂́ʿʳ˶̂́̇˴̀˼́˴̇˼̂́ʿʳ˶̈̅̉˸̆ʳ̂̅ʿʳ˵˸́˷̆ʳ̂́ʳ˼́̇˸̅˹˴˶˸ʳˣ˼́ʳ
ʻˢ˟˕ʼʳ̂˹ʳ˧˖ˣˁʳ
˄˅ˁ˅ʳˡ̂ʳ˶̅˴˶˾̆ʳ̂́ʳ˼́̇˸̅˹˴˶˸ʳ̃˼́ʳʻˢ˟˕ʼʳ̂˹ʳ˧˖ˣˁʳ
˄˅ˁˆʳˡ̂ʳ˶̂́̇˴̀˼́˴̇˼̂́ʿʳ̆̂˿˷˸̅ʳ̅˸̆˼˷̈˸ʳ̂̅ʳ̆̂˿˷˸̅ʳ˵˴˿˿̆ʳ̂́ʳ̃̅̂˷̈˶̇ˁʳ
˄˅ˁˇʳ˧˻˸ʳ˜˖ʳ̂́ʳ̇˻˸ʳ˧˖ˣʳ̀˴̌ʳ́̂̇ʳ˵˸ʳ˷˴̀˴˺˸˷ʿʳ˶˼̅˶̈˼̇̆ˁʳ
˄˅ˁˈʳ˧˻˸ʳ̈̃̃˸̅̀̂̆̇ʳ˸˷˺˸ʳ̂˹ʳ̇˻˸ʳ̃̅̂̇˸˶̇˼̉˸ʳ̆̇̅˼̃ʳ̂́ʳ̇˻˸ʳ˼́̇˸̅˹˴˶˸ʳ̃˼́ʳ
̀̈̆̇ʳ˵˸ʳ̃̅˸̆˸́̇ʳ̂̅ʳ˿̂̂˾ʳ˴̆ʳ˼˹ʳ˼̇ʳ˶˴̈̆˸̆ʳ̇˻˸ʳ˼́̇˸̅˹˴˶˸ʳ̃˼́ʳ̇̂ʳ̆˸̉˸̅ˁʳ
˄˅ˁˉʳ˧˻˸ʳ̅˸̆˼˷̈˴˿ʳ̅̂̆˼́ʳ̂̅ʳ̇˼́ʳ̂˼˿ʳ̂˹ʳ̆̂˿˷˸̅˼́˺ʳʻ˶̂̀̃̂́˸́̇ʳ̂̅ʳ˶˻˼̃ʳ
˶̂̀̃̂́˸́̇ʼʳ˼̆ʳ́̂̇ʳ˵̈̅́˸˷ʳ˼́̇̂ʳ˵̅̂̊́ʳ̂̅ʳ˵˿˴˶˾ʳ˶̂˿̂̅ˁʳ
˄˅ˁˊʳ˦˸˴˿˴́̇ʳ̂́ʳ̇̂̃ʳ̂˹ʳ̇˻˸ʳ˜˧ˢʳ˶˼̅˶̈˼̇ʳ˻˴̆ʳ́̂̇ʳ˻˴̅˷˸́˸˷ˁʳ
˄˅ˁˋʳˣ˼́ʳ̇̌̃˸ʳ̀̈̆̇ʳ̀˴̇˶˻ʳ̇̌̃˸ʳ˼́ʳ̆̃˸˶˼˹˼˶˴̇˼̂́ʳ̆˻˸˸̇ˁʳ
˄˅ˁˌʳ˟˖˗ʳ̃˼́ʳ˿̂̂̆˸ʳ̂̅ʳ̀˼̆̆˼́˺ʳ̃˼́̆ˁʳ
˄˅ˁ˄˃ʳˣ̅̂˷̈˶̇ʳ̃˴˶˾˴˺˼́˺ʳ̀̈̆̇ʳ̇˻˸ʳ̆˴̀˸ʳ˴̆ʳ̆̃˸˶˼˹˼˸˷ʳ̂́ʳ̃˴˶˾˴˺˼́˺ʳ
̆̃˸˶˼˹˼˶˴̇˼̂́ʳ̆˻˸˸̇ˁʳ
˄˅ˁ˄˄ʳˣ̅̂˷̈˶̇ʳ˷˼̀˸́̆˼̂́ʳ˴́˷ʳ̆̇̅̈˶̇̈̅˸ʳ̀̈̆̇ʳ˶̂́˹̂̅̀ʳ̇̂ʳ̃̅̂˷̈˶̇ʳ
̆̃˸˶˼˹˼˶˴̇˼̂́ʳ̆˻˸˸̇ˁʳ
ʳ
Vishay
AQL
2.5
0.65
2.5
2.5
2.5
2.5
2.5
0.65
0.65
0.65
0.65
Document Number: 37472
26
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-008N002A1-TMI-ET
www.vishay.com
Vishay
17. Material List of Components for RoHS
1. Declaration that all of or part of products (with the mark “N” in code), including, but not limited to,
the LCM, accessories or packages, manufactured and/or delivered to your company (including your
subsidiaries and affiliated company) directly or indirectly by our company (including our subsidiaries or
affiliated companies) do not intentionally contain any of the substances listed in all applicable EU
directives and regulations, including the following substances.
Exhibit AΚThe Harmful Material List
Material
(Cd)
(Pb)
(Hg)
(Cr6+)
PBBs
PBDEs
Limited
100
1000
1000
1000
1000
1000
Value
ppm
ppm
ppm
ppm
ppm
ppm
Above limited value is set up according to RoHS.
2.Process for RoHS requirementΚ
(1) Use the Sn/Ag/Cu soldering surfaceΙthe surface of Pb-free solder is rougher than we used before.
(2) Heat-resistance temp.Κ
ReflowΚ250C, 30 seconds Max.Ι
Connector soldering wave or hand solderingΚ320C, 10 seconds max.
(3) Temp. curve of reflow, max. Temp.Κ235C±5 degreesΙ
Recommended customer’s soldering temp. of connectorΚ280C, 3 seconds.
Revision: 08-Jan-13
Document Number: 37472
27
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000