X

HD3MDIPX
EQUIP® SERIES 720P TDN INDOOR FIXED
MINI-DOME NETWORK CAMERA
Honeywell’s latest addition to the EQUIP® Series of IP-based products, the HD3MDIPX is a high
definition, True Day/Night indoor fixed mini-dome camera engineered to provide extremely crisp
images at minimal bandwidth. The HD3MDIPX provides 720p resolution at full frame rate.
Progressive scan technology and 2D edge enhancement provide outstanding clarity and definition.
Digital Noise Reduction results in significant storage savings without sacrificing image quality in low
light. The ¼" progressive scan CMOS sensor offers the latest in digital video surveillance
technology with accurate colour rendition through a wide variety of lighting conditions.
The compact, one piece design provides fast and easy installation in any application. The camera
comes complete with surface and flush mounting options (compatible with a 4S electrical box)
and an optional wall/pendant mount kit is available.
In addition to the low light colour performance, the camera will automatically switch to black and
white. In this mode, lighting can be complemented with infrared for discreet/covert low light
surveillance with exceptional monochrome images.
A 3-D axis gimbal capable of 360° of pan, 180° of tilt and 360° of horizontal rotation simplifies
mechanical camera adjustment. The Vari-focal Auto Iris lens allows the field of view to be adjusted
to suit the scene requirements, and an onboard analogue output allows the installer to connect a
local test monitor while adjusting the scene.
A powerful and intuitive Web Client allows fine tuning of the camera and the auto iris levels. This
can also be performed from most DVR/NVR set-up utilities.
The HD3MDIPX supports dual video streams and multiple compression formats with rates up to
25 frames per second (PAL). The digital compression parameters for the two video streams are
independently configurable. A third analogue stream can be utilised as a back-up, for local viewing
or when retrofitting onto an existing analogue input DVR or encoder (full resolution not available).
With built-in low current Power over Ethernet (IEEE 802.3af), Class 1, power is supplied to the
camera using standard network cabling, eliminating the need for a separate power supply and
associated wiring. In retrofit situations where PoE switching does not exist, the unit can also be
powered directly from 24 VAC.
Market Opportunities
HD3MDIPX is perfect for installations where excellent picture clarity at minimal bandwidth is
required. At three times the resolution of standard analogue cameras, yet with similar
bandwidth requirements, HD3MDIPX can be retrofitted on many existing DVR/NVR installations
without requiring additional storage.
Features
• Outstanding image quality, 720p
(1280 X 720) resolution
• 25 fps (PAL) progressive scan
• Single model for surface mount
and recessed ceiling applications,
4S adapter plate also supplied
• True Day/Night, 3.3-12 mm VFAI lens with
removable IR cut filter
• Includes advanced IP locator software to
make system set-up easy
• Camera tamper detection
• Web server for remote set-up of camera
video and network parameters
• Video motion detection
• Wall/pendant mount kit available
• Selectable compression formats
• Dual digital video streams simultaneously,
independently configurable
• Remote firmware update
• Supports both dynamic and static
IP address assignment
• Choice of 24 VAC or PoE IEEE 802.3af
class 1 power inputs
• Supports input and output alarm contacts
• Supports bidirectional audio
HD3MDIPX
SPECIFICATIONS
Like all cameras in the EQUIP® Series, the
HD3MDIPX network camera uses Honeywell
technology for camera video motion
detection, tamper detection, remote firmware
updating, and for secure storage of all
camera settings. Video motion detection
recognises object motion within the field of
view, then a simple on-screen notification
alerts the user. Camera tamper detection
notifies the user when a camera’s field of view
is altered, obstructed or blurred. This ensures
the video’s integrity and alerts the customer
to either a live event or a system problem that
is causing disruption to the video stream.
Honeywell’s technology also allows users to
remotely upload firmware to the camera.
Set-up is quick and easy and can be
customised through a web client or from an
NVR or DVR. The built-in web server provides
password protected access to the camera’s
video and network set-up.
System Diagram
Hybrid DVR
Monitor
NETWORK
Analogue out
NVR
Public View
Monitor (PVM) /
Point-of-Sale
(POS)
Keyboard
®
EQUIP SERIES
CAMERAS
Monitor
Monitor
HD3MDIPX
SPECIFICATIONS
Operational
Environmental
Video Standard
NTSC, PAL
Scanning System
Progressive scan
Image Sensor
1/4" CMOS
Number of Pixels
(H x V)
1280 x 720
Minimum
Illumination
(DSS on)
0.25 lux colour/0.22 lux for
BW @ 50 IRE, F1.6
0.11 lux colour/0.09 lux for
BW @ 30 IRE, F1.6
Automatic Lens
Control
Video Output
(AUX)
S/N Ratio
Temperature
Operating: -10°C to 50°C
Storage: -20°C to 60°C
Relative Humidity
0% to 85%, non-condensing
IP Specifications
DC Iris Level 1-25
1.0 Vp-p @ 75 Ohms
Video
Compression
MPEG4, MJPEG
Resolutions
1280 x 720
800 x 450
640 x 360
320 x 180
Bitrate (Typical)*
3 Mbps
2 Mbps
1 Mbps
0.35 Mbps
Frame Rate PAL
Up to 25 fps
Video Streaming
Dual streaming:
Controllable frame rate and bandwidth
Constant or variable bit rate
50 dB or more (AGC off)
Auto Gain Control Off/On, selectable (10-40 dB)
Frame Rate
25
25
25
25
Storage/Day (GB)
31.64
21.09
10.55
3.69
Automatic
Electronic Shutter
1/50-1/100,000 sec (PAL)
Security
Multiple user access levels with password
protection
Lens Type
True Day/Night (TDN), 3.3 mm-12.0 mm
Vari-focal Auto Iris, F1.6
Users
1 Administrator, 1 Guest
White Balance
AWC, AWC Push, Manual
Audio/Two-Way
Line in/out
Video Access
from Web
Browser
Camera live view for up to 1 client
Full control of all camera settings available
to administrator
Minimum Web
Browsing
Requirements
Pentium IV CPU 3.0 GHz or equivalent AMD,
512 MB RAM, AGP graphics card (32 MB RAM)
Windows® XP 2000, Internet Explorer 6.0 or later
Supported
Protocols
HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, RTCP,
FTP, ICMP, DHCP, Bonjour, IGMP, Telnet
Electrical
Input Voltage
24 VAC, PoE IEEE 802.3af, Class 1
Input Range
17–28 VAC
Surge
Suppression
1.5 kW transient
Power
Consumption
3.5 W (max)
Regulatory
Mechanical
Dimensions
(W x H x D)
See Diagram on Back Page
Weight
0.448 kg camera only
Construction
Housing: Polycarbonate
Finish: Matt texture, Off White
Connector
Video Output (AUX): 2-pin Molex connector
Power Input: Removable screw block
Network: RJ45 connector
Alarm I/O: Removable screw block
Audio In: Removable screw block
Audio Out: Removable screw block
Emissions
FCC part 15B, CE (EN55022)
Immunity
CE (EN50130-4)
Safety
EU: 2006/95/EC LVD, UL 60950
*Actual bitrate is scene and motion dependant.
HD3MDIPX
SPECIFICATIONS
161.5 mm
System Compatibility
120.5 mm
Honeywell Products
97.7 mm
Hybrid DVRs
Fusion IV
v4.00.6401 or higher
Enterprise
NVR Series
Enterprise class digital NVR system,
version 5.75 build 17 or higher
MAXPRO
VMS®/IP Engine
Version R200 or higher
DVM
DVM R300 or higher
Fusion IV
v4.00.6401 or higher
28.5 mm
NVRs
9.1 mm
Third-Party Products
Refer to the Honeywell Open Technology Alliance for a comprehensive
list of compatible products to which this device is integrated.
125.1 mm
Accessories
Wall/Pendant Mount Kit, Off White
125.1 mm
HD3-MK
46.7 mm
Housing and Mounts
Ordering
HD3MDIPX
Network True Day/Night, 1/4" Progressive Scan, CMOS, 720p Resolution Camera, 3.3-12 mm VFAI, 24 VAC
or PoE IEEE 802.3af, PAL
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.
For additional information,
please visit www.honeywell.com/security/uk
Honeywell Security Group
Honeywell Systems Group
Aston Fields Road
Whitehouse Industrial Estate
Runcorn
Cheshire
WA7 3DL
Tel: 08448 000 235
www.honeywell.com
HVS-HD3MDIPX-02-UK(0510)DS-GCSC
May 2010
© 2010 Honeywell International Inc.