X

HD4MWIHX
EQUIP® SERIES WIDE DYNAMIC 720P TRUE DAY/NIGHT
RUGGED INDOOR/OUTDOOR IP DOME CAMERA
Honeywell’s latest addition to the EQUIP® Series of IP-based products, the HD4MWIHX is a high
definition, Wide Dynamic, True Day/Night rugged indoor/outdoor fixed mini dome network camera.
This ultra compact and vandal-resistant camera provides extremely crisp images at minimal
bandwidth. The HD4MWIHX provides 720p resolution at full frame rate. Progressive scan
technology and 2D edge enhancement provide outstanding clarity and definition. Digital Noise
Reduction results in significant storage savings without sacrificing image quality in low light. The
1/3" progressive scan CMOS sensor offers the latest in digital video surveillance technology with
accurate colour rendition through a wide variety of lighting conditions. The HD4MWIHX also
supports the PSIA specification for interoperability between network video products.
The HD4MWIHX integrates a camera and lens in an ultra compact, single piece, tamper-proof unit
for fast and easy installation in any application. The camera comes complete with surface and
flush mounting options. Wall and pendant mount kits are also available.
In addition to the low light colour performance, the camera will automatically switch to black and
white. In this mode, lighting can be complemented with infrared for discreet/covert low light
surveillance with exceptional monochrome images. In high contrast lighting conditions, the
HD4MWIHX delivers higher quality images and significantly better dynamic range (>100 dB) than
conventional IP cameras. Designed for environments with difficult lighting, the HD4MWIHX camera
offers a unique solution to capture the whole picture regardless of lighting condition or application.
A 3D axis gimbal capable of 360º of pan, 180º of tilt and 360º of horizontal rotation simplifies
mechanical camera adjustment. The Vari-focal Auto Iris (VFAI) lens allows the field of view to be
adjusted to suit the scene requirements, and an integrated analogue output allows the installer to
connect a local test monitor while adjusting the camera field of view.
A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels. This
can also be performed from most NVR setup utilities.
The HD4MWIHX supports dual video streams and multiple compression formats with rates up to
30 frames per second (25 fps for PAL systems). The digital compression parameters for the two
video steams are independently configurable. The HD4MWIHX features analogue video out for
aiming and focusing.
With built-in low current Power over Ethernet (IEEE 802.3af), power is supplied to the camera using
standard network cabling, eliminating the need for a separate power supply and associated wiring.
In retrofit situations where PoE is not available, the unit can also be powered directly from 24 VAC.
Market Opportunities
The HD4MWIHX is perfect for installations where excellent picture clarity at minimal bandwidth is
required. At three times the resolution of standard analogue cameras, yet with similar bandwidth
requirements, the HD4MWIHX can be retrofitted on many existing NVR installations without
requiring additional storage. Its discreet, vandal-resistant, outdoor design provides maximum
protection against dust, dirt and water and provides optimum performance for both indoor and
outdoor applications.
Features
• Outstanding image quality, 720p
(1280 × 720) resolution
• Selectable compression formats
• PSIA support
• Web server for remote setup of camera
video and network parameters
• 30 fps (25 fps PAL) progressive scan
• Dual digital video streams simultaneously,
independently configurable
• Choice of 24 VAC or PoE IEEE 802.3af
power inputs
• Remote firmware update
• Supports input and output alarm contacts
• Supports both dynamic and static
IP addresses
• Supports bidirectional audio
• True Day/Night, 3.3-12 mm VFAI lens
with mechanical IR cut filter
• Dynamic Range: 115dB
• Camera tamper detection
• Video motion detection
• Wall and pendant mount kit available
• Includes advanced IP locator software to
make system setup easy
• Rugged polycarbonate dome
HD4MWIHX
SPECIFICATIONS
Like all cameras in the EQUIP IP Series, the HD4MWIHX network camera uses Honeywell technology for camera video motion detection,
tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection recognises object motion
within the field of view, then a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field
of view is altered, blinded or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem
that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. The
built-in web server provides password-protected access to the camera’s video and network setup.
SYSTEM DIAGRAM
Hybrid DVR
Monitor
NETWORK
Analogue out
NVR
Keyboard
EQUIP® Series
Cameras
Monitor
Monitor
HD4MWIHX
SPECIFICATIONS
Environmental
Operational
Video Standard
PAL
Temperature
Operating: -25°C to 55°C
Storage: -40°C to 70°C
Scanning
System
Progressive scan
Relative
Humidity
0% to 85%, non-condensing
Image Sensor
1/3 CMOS
Rating
IP66
Number of Pixels
(H × V)
1280 x 720
IP Specifications
Minimum
Illumination
0.14 lux colour/0.1 lux BW @ 50 IRE, F1.6
Video
Compression
Dual stream H.264 and MJPEG
Automatic Lens
Control
DC Iris Level 1-25
Video Output (AUX)
1.0 V p-p @ 75 ohms
Dynamic Range
115 dB
Primary Stream
Resolution
1280 x 720
800 x 450
640 x 360
320 x 180
Bitrate H.264
(Typical)*
2.7 Mbps
1.8 Mbps
0.9 Mbps
0.315 Mbps
S/N Ratio
50 dB or more (AGC off)
Auto Gain
Control
Up to 30/25 fps video in all resolutions
Off/On, selectable (20-40 dB)
Frame Rate
NTSC/PAL
Video
Streaming
Dual streaming: H.264 and MJPEG
Controllable frame rate and bandwidth
Constant or variable bit rate
Security
Multiple user access levels with password
protection
Video Access
from Web
Browser
Full control of all camera settings available
to administrator
Minimum
Web
Browsing
Requirements
Pentium IV CPU 3.1 GHz or faster
2 GB RAM
Windows XP®, Windows 7 (32/64),
Windows 2K8 (64)
Internet Explorer 6, 7, 8 or 9
Installation and
Management
Maintenance
Honeywell IP Utility software identifies the
IP address, discovers cameras, supports
firmware upgrades
Supported
Protocols
HTTP, TCP, RTSP, RTP, UDP, ARP,
DNS, RTCP, FTP, ICMP, DHCP, Bonjour,
IGMP, Telnet
Standards
PSIA support
Automatic
Electronic Shutter
1/30-1/87,000 sec (NTSC and PAL)
Lens Type
True Day/Night (TDN), 3.3-12 mm
Vari-focal Auto Iris, F1.6
Angle of View
Wide
Tele
Diagonal
125.7°
29.9°
Horizontal
89.8°
23.9°
Vertical
63.6°
17.9°
White Balance
Auto, Manual, WBC Push
Audio/Two-Way
Line in/out
Electrical
Input Voltage
24 V AC, PoE IEEE 802.3af
Input Range
17–28 VAC
Surge
Suppression
1.5 kW transient
Power
Consumption
5.0 W (max) 24 V AC
PoE: PD Type 1 Class 2
Mechanical
Dimensions
(W x H x D)
See Diagram
Weight
1.3 kg camera only
Construction
Housing: Die cast Aluminium
Finish: Light Grey Powder Coat
Dome: Polycarbonate
Frame
Rate
30/25
30/25
30/25
30/25
Storage/Day
(GB)
28.48
18.98
9.49
3.32
Regulatory
Emissions
FCC, CE (EN55022)
Immunity
CE (EN50130-4)
Safety
EU: EN60950-1:2006
* Actual bitrate is scene and motion dependent with H.264 stream.
Connector
Video Output (AUX): 2-pin
Molex connector
Power Input: Removable screw block
Network: RJ45 connector
Alarm I/O: Removable screw block
Audio In: Removable screw block
Audio Out: Removable screw block
HD4MWIHX
SPECIFICATIONS
System Integration
Accessories
Open IP Integration
Housing and Mounts
PSIA support and open API for real interoperability between
Honeywell and other manufacturer’s IP-enabled security
devices. Refer to the Honeywell Open Technology Alliance
[http://www.security.honeywell.com/hota/] to learn more
about our open and integrated solutions.
HD4DIP-PK
Pendant Mount Bracket
HD4DIP-WK
Wall Mount Bracket
Pendant Mount Option
(156 mm)
(90 mm)
Hole for 3/4”
(19 mm)
pipe
(156 mm)
(41 mm)
(104 mm)
(46 mm)
(117.5 mm)
(71.5 mm)
(263.7 mm)
(156 mm)
(186.2 mm)
(219 mm)
(73 mm)
(157.1 mm)
(160 mm)
(120 mm)
Wall Mount Option
(84 mm)
(70 mm)
Ordering
HD4MWIHX
Network True Day/Night Rugged Fixed Dome, 1/3" Progressive Scan, CMOS, Wide Dynamic 720p Resolution
Camera, 3.3-12 mm VFAI, 24 V AC or PoE IEEE 802.3af, H.264, PAL
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.
For additional information,
please visit www.honeywell.com/security/uk
Honeywell Security Group
Aston Fields Road
Whitehouse Industrial Estate
Runcorn
Cheshire
WA7 3DL
Tel: 08448 000 235
www.honeywell.com
HVS-HD4MWIH-02-UK(0612)DS-E
June 2012
© 2012 Honeywell International Inc.